Bosch GSR 10,8-2-LI PROFESSIONAL: English
English: Bosch GSR 10,8-2-LI PROFESSIONAL
OBJ_BUCH-970-005.book Page 11 Thursday, April 11, 2013 1:02 PM
English | 11
Luxemburg
Tel.: +32 2 588 0589
English
Fax: +32 2 588 0595
E-Mail: outillage.gereedschap@be.bosch.com
Safety Notes
Transport
General Power Tool Safety Warnings
Die enthaltenen Li-Ionen-Akkus unterliegen den Anforderun-
Read all safety warnings and all in-
gen des Gefahrgutrechts. Die Akkus können durch den Benut-
WARNING
structions. Failure to follow the warnings
zer ohne weitere Auflagen auf der Straße transportiert wer-
and instructions may result in electric shock, fire and/or seri-
den.
ous injury.
Beim Versand durch Dritte (z.B.: Lufttransport oder Spediti-
on) sind besondere Anforderungen an Verpackung und Kenn-
Save all warnings and instructions for future reference.
zeichnung zu beachten. Hier muss bei der Vorbereitung des
The term “power tool” in the warnings refers to your mains-
Versandstückes ein Gefahrgut-Experte hinzugezogen wer-
operated (corded) power tool or battery-operated (cordless)
den.
power tool.
Versenden Sie Akkus nur, wenn das Gehäuse unbeschädigt
Work area safety
ist. Kleben Sie offene Kontakte ab und verpacken Sie den Ak-
Keep work area clean and well lit. Cluttered or dark areas
ku so, dass er sich nicht in der Verpackung bewegt.
invite accidents.
Bitte beachten Sie auch eventuelle weiterführende nationale
Vorschriften.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
Entsorgung
dust. Power tools create sparks which may ignite the dust
or fumes.
Elektrowerkzeuge, Akkus, Zubehör und Verpackun-
gen sollen einer umweltgerechten Wiederverwertung
Keep children and bystanders away while operating a
zugeführt werden.
power tool. Distractions can cause you to lose control.
Werfen Sie Elektrowerkzeuge und Akkus/Batterien nicht in
Electrical safety
den Hausmüll!
Power tool plugs must match the outlet. Never modify
Nur für EU-Länder:
the plug in any way. Do not use any adapter plugs with
Gemäß der europäischen Richtlinie
earthed (grounded) power tools. Unmodified plugs and
2012/19/EU müssen nicht mehr ge-
matching outlets will reduce risk of electric shock.
brauchsfähige Elektrowerkzeuge und ge-
Avoid body contact with earthed or grounded surfaces,
mäß der europäischen Richtlinie
such as pipes, radiators, ranges and refrigerators.
2006/66/EG müssen defekte oder ver-
There is an increased risk of electric shock if your body is
brauchte Akkus/Batterien getrennt gesam-
earthed or grounded.
melt und einer umweltgerechten Wiederverwendung zuge-
Do not expose power tools to rain or wet conditions.
führt werden.
Water entering a power tool will increase the risk of electric
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt
shock.
abgegeben werden bei:
Do not abuse the cord. Never use the cord for carrying,
Deutschland
pulling or unplugging the power tool. Keep cord away
Recyclingzentrum Elektrowerkzeuge
from heat, oil, sharp edges and moving parts. Damaged
Osteroder Landstraße 3
or entangled cords increase the risk of electric shock.
37589 Kalefeld
When operating a power tool outdoors, use an exten-
Schweiz
sion cord suitable for outdoor use. Use of a cord suitable
Batrec AG
for outdoor use reduces the risk of electric shock.
3752 Wimmis BE
If operating a power tool in a damp location is unavoid-
Akkus/Batterien:
able, use a residual current device (RCD) protected
Li-Ion:
supply. Use of an RCD reduces the risk of electric shock.
Bitte beachten Sie die Hinweise im Ab-
schnitt „Transport“, Seite 11.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
Änderungen vorbehalten.
erating power tools may result in serious personal injury.
Bosch Power Tools 2 609 141 052 | (11.4.13)
OBJ_BUCH-970-005.book Page 12 Thursday, April 11, 2013 1:02 PM
12 | English
Use personal protective equipment. Always wear eye
Battery tool use and care
protection. Protective equipment such as dust mask,
Recharge only with the charger specified by the manu-
non-skid safety shoes, hard hat, or hearing protection
facturer. A charger that is suitable for one type of battery
used for appropriate conditions will reduce personal inju-
pack may create a risk of fire when used with another bat-
ries.
tery pack.
Prevent unintentional starting. Ensure the switch is in
Use power tools only with specifically designated bat-
the off-position before connecting to power source
tery packs. Use of any other battery packs may create a
and/or battery pack, picking up or carrying the tool.
risk of injury and fire.
Carrying power tools with your finger on the switch or en-
When battery pack is not in use, keep it away from oth-
ergising power tools that have the switch on invites acci-
er metal objects, like paper clips, coins, keys, nails,
dents.
screws or other small metal objects, that can make a
Remove any adjusting key or wrench before turning
connection from one terminal to another. Shorting the
the power tool on. A wrench or a key left attached to a ro-
battery terminals together may cause burns or a fire.
tating part of the power tool may result in personal injury.
Under abusive conditions, liquid may be ejected from
Do not overreach. Keep proper footing and balance at
the battery; avoid contact. If contact accidentally oc-
all times. This enables better control of the power tool in
curs, flush with water. If liquid contacts eyes, addition-
unexpected situations.
ally seek medical help. Liquid ejected from the battery
Dress properly. Do not wear loose clothing or jewel-
may cause irritation or burns.
lery. Keep your hair, clothing and gloves away from
Service
moving parts. Loose clothes, jewellery or long hair can be
Have your power tool serviced by a qualified repair per-
caught in moving parts.
son using only identical replacement parts. This will en-
If devices are provided for the connection of dust ex-
sure that the safety of the power tool is maintained.
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
Safety Warnings for Drills and Screwdriver
duce dust-related hazards.
Hold power tool by insulated gripping surfaces, when
Power tool use and care
performing an operation where the cutting accessory
Do not force the power tool. Use the correct power tool
or fastener may contact hidden wiring. Cutting accesso-
for your application. The correct power tool will do the
ry and fasteners contacting a “live” wire may make ex-
job better and safer at the rate for which it was designed.
posed metal parts of the power tool “live” and could give
the operator an electric shock.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
Use auxiliary handle(s), if supplied with the tool. Loss
the switch is dangerous and must be repaired.
of control can cause personal injury.
Disconnect the plug from the power source and/or the
Use appropriate detectors to determine if utility lines
battery pack from the power tool before making any
are hidden in the work area or call the local utility com-
adjustments, changing accessories, or storing power
pany for assistance. Contact with electric lines can lead
tools. Such preventive safety measures reduce the risk of
to fire and electric shock. Damaging a gas line can lead to
starting the power tool accidentally.
explosion. Penetrating a water line causes property dam-
age.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
Switch off the power tool immediately when the tool in-
these instructions to operate the power tool. Power
sert jams. Be prepared for high reaction torque that
tools are dangerous in the hands of untrained users.
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
Maintain power tools. Check for misalignment or bind-
— it becomes wedged in the workpiece.
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
Hold the machine with a firm grip. High reaction torque
damaged, have the power tool repaired before use.
can briefly occur while driving in and loosening screws.
Many accidents are caused by poorly maintained power
Secure the workpiece. A workpiece clamped with clamp-
tools.
ing devices or in a vice is held more secure than by hand.
Keep cutting tools sharp and clean. Properly maintained
Always wait until the machine has come to a complete
cutting tools with sharp cutting edges are less likely to bind
stop before placing it down. The tool insert can jam and
and are easier to control.
lead to loss of control over the power tool.
Use the power tool, accessories and tool bits etc. in ac-
Do not open the battery. Danger of short-circuiting.
cordance with these instructions, taking into account
Protect the battery against heat, e. g., against
the working conditions and the work to be performed.
continuous intense sunlight, fire, water, and
Use of the power tool for operations different from those
moisture. Danger of explosion.
intended could result in a hazardous situation.
2 609 141 052 | (11.4.13) Bosch Power Tools
OBJ_BUCH-970-005.book Page 13 Thursday, April 11, 2013 1:02 PM
English | 13
In case of damage and improper use of the battery, va-
Technical Data
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
Cordless Drill/Driver GSR 10,8-2-LI
tate the respiratory system.
Article number
3 601 H68 1..
Use the battery only in conjunction with your Bosch
Rated voltage
V= 10.8
power tool. This measure alone protects the battery
No-load speed
against dangerous overload.
–1st gear
min
-1
0–400
Use only original Bosch batteries with the voltage list-
–2nd gear
min
-1
0 – 1300
ed on the nameplate of your power tool. When using oth-
Max. torque for hard/soft screw-
er batteries, e.g. imitations, reconditioned batteries or
driving application according to
other brands, there is danger of injury as well as property
ISO 5393
Nm 30/15*
damage through exploding batteries.
Max. drilling dia.
– Steel
mm
10
Product Description and Specifica-
– Wood
mm
19
tions
Max. screw dia. mm 7
Chuck clamping range
mm 1.0 – 10
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
Weight according to
structions may result in electric shock, fire
EPTA-Procedure 01/2003 kg 0.95
and/or serious injury.
*dependent of the battery pack being used
Noise/Vibration Information
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
Intended Use
is 71 dB(A). Uncertainty K=3 dB.
The machine is intended for driving in and loosening screws
The noise level when working can exceed 80 dB(A).
as well as for drilling in wood, metal, ceramic and plastic.
Wear hearing protection!
The light of this power tool is intended to illuminate the power
Vibration total values a
h
(triax vector sum) and uncertainty K
tool’s direct area of working operation and is not suitable for
determined according to EN 60745:
household room illumination
2
2
Drilling into metal: a
h
<2.5m/s
, K =1.5 m/s
,
2
2
Screwdriving: a
h
<2.5m/s
, K =1.5 m/s
.
Product Features
The vibration emission level given in this information sheet has
The numbering of the product features refers to the illustra-
been measured in accordance with a standardised test given
tion of the machine on the graphics page.
in EN 60745 and may be used to compare one tool with anoth-
1 Keyless chuck
er. It may be used for a preliminary assessment of exposure.
2 Torque presetting ring
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
3 Gear selector
applications, with different accessories or poorly maintained,
4 Battery unlocking button*
the vibration emission may differ. This may significantly in-
5 Battery pack*
crease the exposure level over the total working period.
6 Rotational direction switch
An estimation of the level of exposure to vibration should also
7 On/Off switch
take into account the times when the tool is switched off or
8 Battery charge-control indicator
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
9 “PowerLight”
riod.
10 Handle (insulated gripping surface)
Identify additional safety measures to protect the operator
11 Universal bit holder*
from the effects of vibration such as: maintain the tool and the
12 Screwdriver bit*
accessories, keep hands warm, organise work patterns.
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
Declaration of Conformity
can be found in our accessories program.
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
Bosch Power Tools 2 609 141 052 | (11.4.13)
OBJ_BUCH-970-005.book Page 14 Thursday, April 11, 2013 1:02 PM
14 | English
Technical file (2006/42/EC) at:
Dust/Chip Extraction
Robert Bosch GmbH, PT/ETM9,
Dusts from materials such as lead-containing coatings,
D-70745 Leinfelden-Echterdingen
some wood types, minerals and metal can be harmful to
Dr. Egbert Schneider
Helmut Heinzelmann
one’s health. Touching or breathing-in the dusts can cause
Senior Vice President
Head of Product Certification
allergic reactions and/or lead to respiratory infections of
Engineering
PT/ETM9
the user or bystanders.
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
Robert Bosch GmbH, Power Tools Division
containing asbestos may only be worked by specialists.
D-70745 Leinfelden-Echterdingen
– Provide for good ventilation of the working place.
06.03.2013
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
Assembly
materials to be worked.
Prevent dust accumulation at the workplace. Dusts can
Battery Charging (see figure A)
easily ignite.
Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
Operation
ium ion battery of your power tool.
Note: The battery is supplied partially charged. To ensure full
Starting Operation
capacity of the battery, completely charge the battery in the
Inserting the battery
battery charger before using your power tool for the first time.
Use only original Bosch lithium ion batteries with the
The lithium ion battery can be charged at any time without re-
voltage listed on the nameplate of your power tool. Us-
ducing its service life. Interrupting the charging procedure
ing other batteries can lead to injuries and pose a fire haz-
does not damage the battery.
ard.
The Lithium-Ion battery is protected against deep discharging
Note: Use of batteries not suitable for the machine can lead to
by the “Electronic Cell Protection (ECP)”. When the battery is
malfunctions of or cause damage to the power tool.
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
Set the rotational direction switch 6 to the centre position in
order to avoid unintentional starting. Insert the charged bat-
Do not continue to press the On/Off switch after the
tery 5 into the handle so that it can be felt to engage and faces
machine has been automatically switched off. The bat-
flush against the handle.
tery can be damaged.
To remove the battery 5 press the unlocking buttons 4 and
Reversing the rotational direction (see figure C)
pull out the battery downwards. Do not exert any force.
The rotational direction switch 6 is used to reverse the rota-
The battery is equipped with a NTC temperature control
tional direction of the machine. However, this is not possible
which allows charging only within a temperature range of be-
with the On/Off switch 7 actuated.
tween 0 °C and 45 °C. A long battery service life is achieved
Right Rotation: For drilling and driving in screws, push the
in this manner.
rotational direction switch 6 left to the stop.
Observe the notes for disposal.
Left Rotation: For loosening and unscrewing screws and
nuts, press the rotational direction switch 6 through to the
Changing the Tool (see figure B)
right stop.
Before any work on the machine itself (e. g. mainte-
Setting the torque
nance, tool change, etc.) as well as during transport
With the torque presetting ring 2 the required torque setting
and storage, remove the battery from the power tool.
can be preselected in 20 steps. With the correct setting, the
There is danger of injury when unintentionally actuating
insert tool is stopped as soon as the screw is screwed flush in-
the On/Off switch.
to the material or when the adjusted torque is reached. The
The drill spindle is locked when the On/Off switch 7 is not
safety clutch is deactivated in the “ ” position, e. g. for
pressed. This makes quick, convenient and easy changing of
drilling.
the tool in the drill chuck possible.
Select a higher setting or switch to the “ ” symbol when un-
Open the keyless chuck 1 by turning in rotation direction ,
screwing screws.
until the tool can be inserted. Insert the tool.
Gear selection, mechanical
Firmly tighten the collar of the keyless chuck 1 by hand in ro-
Actuate the gear selector 3 only when the machine is at
tation direction .
a standstill.
Two speed ranges can be preselected with the gear selector
3.
2 609 141 052 | (11.4.13) Bosch Power Tools
OBJ_BUCH-970-005.book Page 15 Thursday, April 11, 2013 1:02 PM
English | 15
Gear I:
Working Advice
Low speed range; for screwdriving or working with large drill-
Apply the power tool to the screw only when it is
ing diameter.
switched off. Rotating tool inserts can slip off.
Gear II:
After longer periods of working at low speed, allow the ma-
High speed range; for working with small drilling diameter.
chine to cool down by running it for approx. 3 minutes at max-
If the gear selector 3 cannot be pushed through to the stop,
imum speed with no load.
lightly turn the drill chuck with drill.
For drilling in metal, use only perfectly sharpened HSS drill
Switching On and Off
bits (HSS=high-speed steel). The appropriate quality is guar-
To start the machine, press the On/Off switch 7 and keep it
anteed by the Bosch accessories program.
pressed.
Before screwing larger, longer screws into hard materials, it is
The power light 9 lights up when the On/Off switch 7 is slightly
advisable to predrill a pilot hole with the core diameter of the
thread to approx.
2
or completely pressed, and allows the work area to be illumi-
/
3
of the screw length.
nated when lighting conditions are insufficient.
To switch off the machine, release the On/Off switch 7.
Maintenance and Service
To save energy, only switch the power tool on when using it.
Maintenance and Cleaning
Adjusting the Speed
Before any work on the machine itself (e. g. mainte-
The speed of the switched on power tool can be variably ad-
nance, tool change, etc.) as well as during transport
justed, depending on how far the On/Off switch 7 is pressed.
and storage, remove the battery from the power tool.
Light pressure on the On/Off switch 7 results in a low rotation-
There is danger of injury when unintentionally actuating
al speed. Further pressure on the switch results in an increase
the On/Off switch.
in speed.
For safe and proper working, always keep the machine
Fully automatic spindle locking (Auto-lock)
and ventilation slots clean.
When the On/Off switch 7 is not pressed, the drill spindle and
When the battery is no longer operative, please refer to an au-
thus the tool holder are locked.
thorised after-sales service agent for Bosch power tools.
This enables screws to be screwed in, even when the battery
After-sales Service and Application Service
is empty and allows for the machine to be used as a screwdriv-
er.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
Run-on Brake
parts. Exploded views and information on spare parts can al-
When the On/Off switch 7 is released, the chuck brakes to a
so be found under:
stop, thus preventing the run-on of the tool.
www.bosch-pt.com
When driving in screws, wait until the screw is screwed in
Bosch’s application service team will gladly answer questions
flush with the material and then release the On/Off switch 7.
concerning our products and their accessories.
By doing so, the head of the screw does not penetrate into the
In all correspondence and spare parts order, please always in-
material.
clude the 10-digit article number given on the type plate of
Battery Charge-control Indication
the machine.
The battery charge-control indicator 8 consists of three green
Great Britain
LEDs, and indicates the charge condition of the battery for a
Robert Bosch Ltd. (B.S.C.)
few seconds when the On/Off switch 7 is pressed halfway or
P.O. Box 98
fully.
Broadwater Park
LED Capacity
North Orbital Road
Denham
Continuous lighting 3 x green ≥ 2/3
Uxbridge
Continuous lighting 2 x green ≥1/3
UB 9 5HJ
Continuous lighting 1 x green < 1/3
Tel. Service: (0844) 7360109
Flashing light 1 x green Reserve
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Temperature Dependent Overload Protection
Ireland
When using as intended for, the power tool cannot be subject
Origo Ltd.
to overload. When the load is too high or the allowable battery
Unit 23 Magna Drive
temperature range of 0–70 °C is exceeded, the speed is re-
Magna Business Park
duced. The power tool will not run at full speed until reaching
City West
the allowable battery temperature.
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Bosch Power Tools 2 609 141 052 | (11.4.13)
