Bosch AMC2 ENC-UL1 - Enclosure - Small: Included parts

AEC-AMC2-UL1 - Installation manual en 5

Included parts

The metal housing inlcudes the following components:

Figure 1 Parts of the housing

1 = Cover grounding post

2 = Mounting rail for PS and AMC

3 = AMC grounding post

4 = Cable knock-outs for reader and signal cables

5 = Cover tamper switch

6 = Temperature sensor bracket

7 = Clips for rechargeable batteries

8 = Main grounding post

9 = Name plate

10 = Label

11 = Power cable knock-out

12 = Three pin connector

13 = Power supply connector

Bosch Sicherheitssysteme GmbH F.01U.097.252 | V 3.2 | 2010.01

6 en AEC-AMC2-UL1 - Installation manual

The accessories kit includes the following cables. Install these

cables as described in Section Figure 3 Demensions of the

housing, page 7.

Figure 2 Accessories kit content

Content of the accessories kit:

A = Pre-assembled cable to connect the AMC to the power

supply

B = Pre-assembled cable to connect the rechargeable batteries

to the UPS (uninterruptable power supply) which is included in

the power supply

C = Cable using 24 V mode

D = Grounding cable for the cover

E = Cable ties to secure the pre-assembled cable

G = Pre-assembled cable with temperature sensor

H = Three screw anchors S8 and wood screws M6 x 50

J = Bracket for cable fixing

F.01U.097.252 | V 3.2 | 2010.01 Bosch Sicherheitssysteme GmbH