Bosch AHS 50-16: English
English: Bosch AHS 50-16
OBJ_BUCH-1297-004.book Page 8 Wednesday, April 25, 2012 11:10 AM
8 | English
Kundendienst und Kundenberatung
English
www.bosch-garden.com
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
Safety Notes
bitte unbedingt die 10-stellige Sachnummer laut Typenschild
des Elektrowerkzeuges an.
Explanation of symbols
Deutschland
Read instruction manual.
Robert Bosch GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
Do not use the hedgecutter in the rain or leave it
37589 Kalefeld – Willershausen
outdoors when it is raining.
Tel. Kundendienst: +49 (1805) 70 74 10*
Fax: +49 (1805) 70 74 11*
(*Festnetzpreis 14 ct/min, höchstens 42 ct/min aus Mobil-
Switch off and remove plug from mains before ad-
funknetzen)
justing, cleaning or if the cable is entangled or if
E-Mail: Servicezentrum.Elektrowerkzeuge@de.bosch.com
the cable is cut or damaged and before leaving the
Tel. Kundenberatung: +49 (1803) 33 57 99
hedgecutter unattended for any period.
(Festnetzpreis 9 ct/min, höchstens 42 ct/min aus Mobilfunk-
netzen)
General Power Tool Safety Warnings
Fax: +49 (711) 7 58 19 30
Read all safety warnings and all in-
WARNING
E-Mail: kundenberatung.ew@de.bosch.com
structions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
Österreich
ous injury.
Tel.: +43 (01) 7 97 22 20 10
Save all warnings and instructions for future reference.
Fax: +43 (01) 7 97 22 20 11
E-Mail: service.elektrowerkzeuge@at.bosch.com
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
Schweiz
power tool.
Tel.: +41 (044) 8 47 15 11
Work area safety
Fax: +41 (044) 8 47 15 51
f Keep work area clean and well lit. Cluttered or dark areas
Luxemburg
invite accidents.
Tel.: +32 2 588 0589
f Do not operate power tools in explosive atmospheres,
Fax: +32 2 588 0595
such as in the presence of flammable liquids, gases or
E-Mail: outillage.gereedschap@be.bosch.com
dust. Power tools create sparks which may ignite the dust
Entsorgung
or fumes.
f Keep children and bystanders away while operating a
Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!
power tool. Distractions can cause you to lose control.
Nur für EU-Länder:
Electrical safety
Gemäß der Europäischen Richtlinie
2002/96/EG über Elektro- und Elektronik-
f Power tool plugs must match the outlet. Never modify
Altgeräte und ihrer Umsetzung in nationales
the plug in any way. Do not use any adapter plugs with
Recht müssen nicht mehr gebrauchsfähige
earthed (grounded) power tools. Unmodified plugs and
Elektrowerkzeuge getrennt gesammelt und
matching outlets will reduce risk of electric shock.
einer umweltgerechten Wiederverwertung
f Avoid body contact with earthed or grounded surfaces,
zugeführt werden.
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
Änderungen vorbehalten.
earthed or grounded.
f Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
f Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
f When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
F 016 L70 775 | (25.4.12) Bosch Power Tools
OBJ_BUCH-1297-004.book Page 9 Wednesday, April 25, 2012 11:10 AM
English | 9
f If operating a power tool in a damp location is unavoid-
f Keep cutting tools sharp and clean. Properly maintained
able, use a residual current device (RCD) protected
cutting tools with sharp cutting edges are less likely to bind
supply. Use of an RCD reduces the risk of electric shock.
and are easier to control.
Personal safety
f Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
f Stay alert, watch what you are doing and use common
the working conditions and the work to be performed.
sense when operating a power tool. Do not use a power
Use of the power tool for operations different from those
tool while you are tired or under the influence of drugs,
intended could result in a hazardous situation.
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Battery tool use and care
f Use personal protective equipment. Always wear eye
f Recharge only with the charger specified by the manu-
protection. Protective equipment such as dust mask,
facturer. A charger that is suitable for one type of battery
non-skid safety shoes, hard hat, or hearing protection
pack may create a risk of fire when used with another bat-
used for appropriate conditions will reduce personal inju-
tery pack.
ries.
f Use power tools only with specifically designated bat-
f Prevent unintentional starting. Ensure the switch is in
tery packs. Use of any other battery packs may create a
the off-position before connecting to power source
risk of injury and fire.
and/or battery pack, picking up or carrying the tool.
f When battery pack is not in use, keep it away from oth-
Carrying power tools with your finger on the switch or en-
er metal objects, like paper clips, coins, keys, nails,
ergising power tools that have the switch on invites acci-
screws or other small metal objects, that can make a
dents.
connection from one terminal to another. Shorting the
f Remove any adjusting key or wrench before turning
battery terminals together may cause burns or a fire.
the power tool on. A wrench or a key left attached to a ro-
f Under abusive conditions, liquid may be ejected from
tating part of the power tool may result in personal injury.
the battery; avoid contact. If contact accidentally oc-
f Do not overreach. Keep proper footing and balance at
curs, flush with water. If liquid contacts eyes, addition-
all times. This enables better control of the power tool in
ally seek medical help. Liquid ejected from the battery
unexpected situations.
may cause irritation or burns.
f Dress properly. Do not wear loose clothing or jewel-
Service
lery. Keep your hair, clothing and gloves away from
f Have your power tool serviced by a qualified repair per-
moving parts. Loose clothes, jewellery or long hair can be
son using only identical replacement parts. This will en-
caught in moving parts.
sure that the safety of the power tool is maintained.
f If devices are provided for the connection of dust ex-
Hedge trimmer safety warnings
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
f Keep all parts of the body away from the cutter blade.
duce dust-related hazards.
Do not remove cut material nor hold material to be cut
when blades are moving. Make sure the switch is off
Power tool use and care
when clearing jammed material. A moment of inatten-
f Do not force the power tool. Use the correct power tool
tion while operating the hedge trimmer may result in seri-
for your application. The correct power tool will do the
ous personal injury.
job better and safer at the rate for which it was designed.
f Carry the hedge trimmer by the handle with the cutter
f Do not use the power tool if the switch does not turn it
blade stopped. When transporting or storing the hedge
on and off. Any power tool that cannot be controlled with
trimmer always fit the cutting device cover. Proper han-
the switch is dangerous and must be repaired.
dling of the hedge trimmer will reduce possible personal
f Disconnect the plug from the power source and/or the
injury from the cutter blades.
battery pack from the power tool before making any
f Hold the power tool by insulated gripping surfaces on-
adjustments, changing accessories, or storing power
ly, because the cutter blade may contact hidden wiring
tools. Such preventive safety measures reduce the risk of
or its own cord. Cutter blades contacting a “live” wire may
starting the power tool accidentally.
make exposed metal parts of the power tool “live” and
f Store idle power tools out of the reach of children and
could give the operator an electric shock.
do not allow persons unfamiliar with the power tool or
f Keep cable away from cutting area. During operation the
these instructions to operate the power tool. Power
cable may be hidden in shrubs and can be accidentally cut
tools are dangerous in the hands of untrained users.
by the blade.
f Maintain power tools. Check for misalignment or bind-
Additional safety warnings
ing of moving parts, breakage of parts and any other
f This tool is not intended for use by persons (including chil-
condition that may affect the power tool’s operation. If
dren) with reduced physical, sensory or mental capabili-
damaged, have the power tool repaired before use.
ties, or lack of experience and knowledge, unless they
Many accidents are caused by poorly maintained power
have been given supervision or instruction concerning use
tools.
of the appliance by a person responsible for their safety.
Bosch Power Tools F 016 L70 775 | (25.4.12)
OBJ_BUCH-1297-004.book Page 10 Wednesday, April 25, 2012 11:10 AM
10 | English
Children should be supervised to ensure that they do not
f Keep all nuts, bolts and screws tight to ensure that the
play with the appliance.
hedgecutter is always in a safe working condition.
f When working with the machine, always hold it firmly
f The hedgecutter should be stored in a dry, high or locked
with both hands and provide for a secure stance. The
up place out of the reach of children.
power tool is guided more secure with both hands.
f Replace worn or damaged parts for safety.
f Wait until the machine has come to a standstill before
f Do not attempt to repair the machine unless you are quali-
placing it down.
fied to do so.
f Other persons and animals should remain at a distance of
f Ensure replacement parts fitted are Bosch approved.
3 metres or more when the machine is being used. The op-
Electrical Safety
erator is responsible for third persons in the working area.
f Warning! Switch off, remove plug from mains before
f Never grasp the blade of the hedgecutter.
adjusting, cleaning or if cable is cut, damaged or entan-
f Children or persons unfamiliar with these instructions
gled.
must not operate the hedgecutter. Local regulations may
f The blades continue to move for a few seconds after
restrict the age of the operator.
the hedgecutter is switched off. Caution! Do not touch
f Never cut a hedge while people, especially children or
the moving blades.
pets, are nearby.
Your machine is double insulated for safety and requires no
f The operator or user is responsible for accidents or haz-
earth connection. The operating voltage is 230 V AC, 50 Hz
ards occurring to other people or their property.
(for non-EU countries 220 V, 240 V as applicable). Only use
f Do not operate the hedgecutter when barefoot or wearing
approved extension cables. Contact your Bosch Service Cen-
open sandals, always wear substantial footwear and long
tre for details.
trousers. The use of sturdy gloves, non-skid footwear and
Extension cords/leads should only be used if they comply
safety glasses is recommended. Do not wear loose cloth-
with H05VV-F or H05RN-F types.
ing or jewellery which can be caught in moving parts.
It is recommended for increased electrical safety to use a Re-
f Thoroughly inspect the area where the hedgecutter is to be
sidual Current Device (RCD) with a tripping current of not
used and remove all wires and other foreign objects.
more than 30 mA. Always check your RCD every time you use
f Prior to operation, check cutter blades, blade bolts and
it.
cutter assembly for wear or damage. Do not operate with a
For products not sold in GB:
damaged or excessively worn cutting device.
WARNING: For your safety, it is required that the plug at-
f Check cable for damage before starting work and replace if
tached to the machine is connected with the extension cord.
necessary. Keep cable away from heat, oil and sharp edg-
The coupling of the extension cord must be protected against
es.
splash water, be made of rubber or coated with rubber. The
f Know how to stop the hedgecutter quickly in an emergen-
extension cord must be used with a cable strain relief.
cy.
The connection lead must be inspected for signs of damage at
f Cut a hedge only in daylight or in good artificial light.
regular intervals and may only be used if in perfect condition.
f Never operate the hedgecutter with defective guards or
If the supply cord is damaged, it must be replaced by a Bosch
without the guard in place.
Service Centre.
f Always ensure all handles and guards supplied are fitted
Products sold in GB only: Your product is fitted with an
when using the hedgecutter. Never attempt to use an in-
BS 1363/A approved electric plug with internal fuse (ASTA
complete hedgecutter or one with an unauthorised modifi-
approved to BS 1362).
cation.
If the plug is not suitable for your socket outlets, it should be
f Never hold the hedgecutter by the guard.
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
f While operating the hedgecutter always be sure of a safe
have the same fuse rating as the original plug.
and secure operating position at all times, especially when
The severed plug must be disposed of to avoid a possible
using steps or a ladder.
shock hazard and should never be inserted into a mains sock-
f Always be aware of your surroundings and stay alert for
et elsewhere.
possible hazards that you may not hear whilst operating
Products sold in AUS and NZ only: Use a residual current de-
the hedgecutter.
vice (RCD) with a rated residual current of 30 mA or less.
Remove the plug from the socket:
Maintenance
– before checking, clearing a blockage or working on the
f Always wear gardening gloves when handling or working
hedgecutter.
near the sharp blades.
– after striking a foreign object, inspect the hedgecutter for
f Examine the machine and replace worn or damaged parts
damage and make repairs as necessary.
for safety.
– if the hedgecutter starts to vibrate abnormally check im-
mediately.
f Always lubricate the cutting blade with protective spray
before storage.
F 016 L70 775 | (25.4.12) Bosch Power Tools
OBJ_BUCH-1297-004.book Page 11 Wednesday, April 25, 2012 11:10 AM
English | 11
f Keep all nuts, bolts and screws tight to be sure that the ma-
Symbol Meaning
chine is in safe working condition.
Switching On
f Ensure replacement parts fitted are Bosch approved.
Switching Off
Symbols
Beware electric shock hazard.
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
Permitted action
symbols will help you to use the machine in a better and safer
manner.
Prohibited action
Symbol Meaning
Wear protective gloves
Accessories
Wear eye protection.
Intended Use
The machine is intended for cutting and trimming hedges and
Movement direction
bushes in domestic use.
Technical Data
Hedgecutter AHS 45-16 AHS 50-16 AHS 55-16 AHS 60-16
Article number
3 600 ... H47 A.. H47 B.. H47 C.. H47 D..
Rated power input
W420450 450 450
Cutting length
mm 450 500 550 600
Tooth opening
mm 16 16 16 16
-1
No-load stroke rate
min
3400 3400 3400 3400
Weight according to EPTA-Procedure
01/2003 kg 2.6 2.7 2.7 2.8
Protection class
/II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
Noise/Vibration Information
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
Measured sound values determined according to
applications, with different accessories or poorly maintained,
2000/14/EC.
the vibration emission may differ. This may significantly in-
Typically the A-weighted noise levels of the product are:
crease the exposure level over the total working period.
Sound pressure level 74 dB(A); sound power level 95 dB(A).
An estimation of the level of exposure to vibration should also
Uncertainty K =2 dB.
take into account the times when the tool is switched off or
Wear hearing protection!
when it is running but not actually doing the job. This may sig-
Vibration total values a
nificantly reduce the exposure level over the total working pe-
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
riod.
2
2
a
h
<2.5m/s
, K=1.5 m/s
.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
The vibration emission level given in this information sheet
accessories, keep hands warm, organise work patterns.
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
Bosch Power Tools F 016 L70 775 | (25.4.12)
OBJ_BUCH-1297-004.book Page 12 Wednesday, April 25, 2012 11:10 AM
12 | English
Declaration of Conformity
Mounting and Operation
We declare under our sole responsibility that the product de-
Action Figure
scribed under “Technical data” is in conformity with the fol-
Delivery Scope 1
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
Connecting the Extension Lead 2
2004/108/EC, 2006/42/EC, 2000/14/EC.
Starting 2
2000/14/EC: Guaranteed sound power level 97 dB(A). Con-
Stopping 2
formity assessment procedure according to Annex V.
Working Advice 2, 3
Equipment category: 25
Blade Maintenance 4
Technical file (2006/42/EC) at:
Storage and Transport 4
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Selecting Accessories 5
Dr. Egbert Schneider
Helmut Heinzelmann
Senior Vice President
Head of Product Certification
Engineering
PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
23.03.2012
Troubleshooting
Problem Possible Cause Corrective Action
Hedgecutter does not op-
Power turned off Turn power on
erate
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty/blown Replace fuse
Hedgecutter operates in-
Extension cable damaged Inspect cable, replace if damaged
termittently
Internal wiring of garden product damaged Contact Service Agent
On/Off switch defective Contact Service Agent
Motor runs but blades re-
Internal fault Contact Service Agent
main stationary
Cutting blade hot Cutting blade blunt Have blade sharpened
Cutting blade has dents Have blade inspected/overhauled
Too much friction, due to lack of lubricant Apply lubricant spray
Excessive vibrations/noise Garden product defective Contact Service Agent
After-sales Service and Customer
Great Britain
Robert Bosch Ltd. (B.S.C.)
Assistance
P.O. Box 98
www.bosch-garden.com
Broadwater Park
North Orbital Road
In all correspondence and spare parts order, please always in-
Denham
clude the 10-digit article number given on the type plate of
Uxbridge
the machine.
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
F 016 L70 775 | (25.4.12) Bosch Power Tools
