Sony MEX-BT2500: Setting the clock Adjusting the volume level of each device

Setting the clock

Adjusting the volume level of

each device

The clock uses a 24-hour digital indication.

1 Press and hold the select button.

When connecting to a portable audio device via

The setup display appears.

Bluetooth connection or AUX input jack, we

recommend adjusting the volume level of the

2 Press the select button repeatedly

connected device, or adjusting the volume level

until “CLOCK-ADJ” appears.

for each connected device in the setup menu on

3 Press (SEEK) +.

this unit. See “Adjusting the volume level”

The hour indication flashes.

(page 15) for Bluetooth device, and “Adjusting

4 Rotate the select button to set the

the volume level” (page 17) for a device

hour and minute.

connected to AUX.

To move the digital indication, press (DSPL).

5 Press the select button.

Detaching the front panel

The setup is complete and the clock starts.

You can detach the front panel of this unit to

To display the clock, press (DSPL). Press

prevent theft.

(DSPL) again to return to the previous display.

With the card remote commander

Caution alarm

In step 4, to set the hour and minute, press M or m.

If you turn the ignition switch to the OFF

Tip

position without detaching the front panel, the

You can set the clock automatically with the RDS

caution alarm will sound for a few seconds.

feature (page 12).

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press , then pull it off towards you.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

6

Attaching the front panel

Engage part A of the front panel with part B of

the unit, as illustrated, and push the left side into

position until it clicks.

A

B

Note

Do not put anything on the inner surface of the front

panel.

7