Sony DAV-SC8: инструкция

4-248-417-71(1)

Compact AV

System

GB

Operating Instructions

RU

Инструкции по эксплуатации

DAV-SC8

©2003 Sony Corporation

3

• If the unit is brought directly from a cold to a warm

WARNING

location, moisture may condense inside the Compact

AV System and cause damage to the lenses. When

To prevent fire or shock hazard, do not

you first install the unit, or when you move it from a

expose the unit to rain or moisture.

cold to a warm location, wait for about 30 minutes

Do not install the appliance in a confined space, such

before operating the unit.

as a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the

Welcome!

apparatus with news papers, table-cloths, curtains, etc.

And don’t place lighted candles on the apparatus.

Thank you for purchasing Sony Compact AV

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

System. Before operating this system, please

read this manual thoroughly and retain it for

future reference.

Don’t throw away the battery with

general house waste, dispose of it

correctly as chemical waste.

This appliance is

classified as a CLASS 1

LASER product. The

label is located on the

bottom of the unit.

Precautions

Safety

• If anything falls into the cabinet, unplug the unit and

have it checked by qualified personnel before

operating it any further.

• The unit is not disconnected from the AC power

source (mains) as long as it is connected to the mains

outlet, even if the unit itself has been turned off.

• Unplug the unit from the wall outlet if you do not

intend to use it for an extended period of time. To

disconnect the cord, pull it out by the plug, never by

the cord.

Installing

• Allow adequate air circulation to prevent internal

heat buildup.

• Do not place the unit on surfaces (rugs, blankets, etc.)

or near materials (curtains, draperies) that may block

the ventilation slots.

• Do not install the unit near heat sources such as

radiators, or air ducts, or in a place subject to direct

sunlight, excessive dust, mechanical vibration, or

shock.

• Do not install the unit in an inclined position. It is

designed to be operated in a horizontal position only.

• Keep the unit and discs away from equipment with

strong magnets, such as microwave ovens, or large

loudspeakers.

• Do not place heavy objects on the unit.

GB

2

On cleaning discs

Precautions

Do not use a commercially available CD/DVD

cleaning disc. It may cause a malfunction.

On power sources

On your TV’s colour

AC power cord must be changed only at the qualified

If the speakers should cause the TV screen to have

service shop.

colour irregularity, turn off the TV at once then turn it

On placement

on after 15 to 30 minutes. If colour irregularity should

persist, place the speakers farther away from the set.

• Place the system in a location with adequate

ventilation to prevent heat build-up in the system.

The nameplate is located on the bottom exterior of the

• At high volume, over long periods of time, the cabinet

unit (HCD-SC8).

becomes hot to the touch. This is not a malfunction.

However, touching the cabinet should be avoided. Do

IMPORTANT NOTICE

not place the unit in a confined space where

Caution: This system is capable of holding a still

ventilation is poor as this may cause overheating.

video image or on-screen display image on your

• Do not block the ventilation slots by putting anything

television screen indefinitely. If you leave the still

on the system. The system is equipped with a high

video image or on-screen display image displayed

power amplifier. If the ventilation slots on the top

on your TV for an extended period of time you risk

surface are blocked, the unit can overheat and

permanent damage to your television screen.

malfunction.

Projection televisions are especially susceptible to

• Do not place the system on a soft surface such as a rug

this.

that might block the ventilation holes on the bottom.

GB

• Do not place the system in a location near heat

On moving the system

sources, or in a place subject to direct sunlight,

When you carry the system, use the following

excessive dust, or mechanical shock.

procedure to protect the inner mechanism. Remove the

On operation

disc, and then press and hold the x button on the

system. After “MECHA LOCK” is displayed on the

• If the system is brought directly from a cold to a warm

front panel display, remove the mains leads from a wall

location, or is placed in a very damp room, moisture

outlet.

may condense on the lenses inside the system. Should

this occur, the system may not operate properly. In

this case, remove the disc and leave the system turned

on for about half an hour until the moisture

evaporates.

• When you move the system, take out any disc. If you

don’t, the disc may be damaged.

• For power saving purposes, the system can be

completely turned off by the "/1 button on the

system. Though the LED remains lit for a while, the

system is completely off.

On adjusting volume

Do not turn up the volume while listening to a section

with very low level inputs or no audio signals. If you

do, the speakers may be damaged when a peak level

section is suddenly played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth

slightly moistened with a mild detergent solution. Do

not use any type of abrasive pad, scouring powder or

solvent such as alcohol or benzine.

If you have any questions or problems concerning your

system, please consult your nearest Sony dealer.

GB

3