Sony XR-4300R: инструкция
Раздел: Авто, мото оборудование и транспорт
Тип: Автомагнитола
Инструкция к Автомагнитоле Sony XR-4300R
3-044-359-42 (1)
FM/MW/LW
FM/MW/LW Cassette Car Stereo
Cassette
Car Stereo
GB
Operating Instructions
CZ
Návod k obsluze
PL
Instrukcje Obsługi
TR
Kullanım kılavuzu
RU
Инструкция по эксплуатации
For installation and connections, see the supplied installation/connections
manual.
Informace o instalaci a zapojení naleznete v přiložené příručce Instalace /
zapojení.
Szczegóły dotyczące instalacji i podłączeń, proszę sprawdzić w dostarczonym,
osobnym podręczniku.
Kurma ve bağlantı işlemleri için ünite beraberindeki Kurma/Bağlantılar kılavuzuna
bakınız.
Перед установкой и подключениями обратитесь к прилагаемой инструкции
по установке и соединению.
XR-C5300RX XR-4300RX
XR-C5300RV XR-4300RV
XR-C5300R XR-4300R
XR-C5200R XR-4200R
2000 Sony Corporation
Welcome !
Precautions
Thank you for purchasing this Sony Cassette
• If your car was parked in direct sunlight
Player. This unit lets you enjoy a variety of
resulting in a considerable rise in
features using the following controller
temperature inside the car, allow the unit to
accessory:
cool off before operating it.
• If no power is being supplied to the unit,
Optional accessory
check the connections first. If everything is
Rotary commander RM-X4S
in order, check the fuse.
Card remote commander RM-X91
• If no sound comes from the speakers of a
(XR-C5300RX/C5300RV/C5300R/C5200R/
two-speaker system, set the fader control to
4300RX/4300RV/4300R only)
the centre position.
• When a tape is played back for a long
XR-C5300RX/C5300RV/C5300R/C5200R
period, the cassette may become warm
only:
because of the built-in power amplifier.
In addition to the cassette playback and radio
However, this is not a sign of malfunction.
operations, you can expand your system by
1
connecting an optional CD/MD unit*
.
If you have any questions or problems
When you operate this unit or a connected
concerning your unit that are not covered in
optional CD unit with the CD TEXT function,
this manual, please consult your nearest Sony
the CD TEXT information will appear in the
2
dealer.
display when you play a CD TEXT disc*
.
1
*
You can connect a CD changer, an MD changer,
To maintain high quality sound
a CD player, or an MD player.
If you have drink holders near your audio
2
*
A CD TEXT disc is an audio CD that includes
equipment, be careful not to splash juice or
information such as the disc name, artist name,
other soft drinks onto the car audio. Sugary
and track names.
residues on this unit or cassette tapes may
This information is recorded on the disc.
contaminate the playback heads, reduce the
sound quality, or prevent sound reproduction
altogether.
Cassette cleaning kits cannot remove sugar
from the tape heads.
2
Cassettes longer than 90 minutes
The use of cassettes longer than 90 minutes is
Notes on Cassettes
not recommended except for long continuous
play. The tape used for these cassettes is very
Cassette care
thin and tends to stretch easily. Frequent
• Do not touch the tape surface of a cassette, as
playing and stopping of these tapes may cause
any dirt or dust will contaminate the heads.
them to become entangled in the cassette deck
• Keep cassettes away from equipment with
mechanism.
built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.
• Do not expose cassettes to direct sunlight,
extremely cold temperatures, or moisture.
• Slack in the tape may cause the tape to be
caught in the machine. Before you insert the
tape, use a pencil or similar object to turn the
reel and take up any slack.
Slack
• Distorted cassettes and loose labels can cause
problems when inserting or ejecting tapes.
Remove or replace loose labels.
• The sound may become distorted while
playing the cassette. The cassette player head
should be cleaned after each 50 hours of use.
3
Table of Contents
This Unit Only
With Optional Equipment
Location of controls................................................. 5
CD/MD Unit (XR-C5300RX/
C5300RV/C5300R/C5200R only)
Getting Started
Playing a CD or MD ......................................... 23
Resetting the unit ................................................ 7
Playing tracks repeatedly
Detaching the front panel .................................. 7
— Repeat Play .............................................. 25
Turning the unit on/off...................................... 8
Playing tracks in random order
How to use the menu ......................................... 8
— Shuffle Play.............................................. 25
Setting the clock .................................................. 9
Cassette Player
Listening to a tape............................................. 10
Playing a tape in various modes......................11
Radio
Memorising stations automatically
— Best Tuning Memory (BTM).................. 12
Memorising only the desired stations............ 12
Receiving the memorised stations .................. 13
RDS
Overview of the RDS function ........................ 14
Displaying the station name............................ 14
Retuning the same programme automatically
— Alternative Frequencies (AF) ................ 15
Listening to traffic announcements ................ 16
Presetting the RDS stations with the AF and
TA data .......................................................... 17
Locating a station by programme type.......... 18
Setting the clock automatically ....................... 19
Other Functions
Additional Information
Labelling the rotary commander .................... 19
Maintenance....................................................... 26
Using the rotary commander .......................... 20
Dismounting the unit ....................................... 27
Adjusting the sound characteristics ............... 21
Specifications ..................................................... 28
Attenuating the sound ..................................... 21
Troubleshooting guide ..................................... 29
Changing the sound and display settings ..... 22
Boosting the bass sound
— D-bass ....................................................... 23
4
Location of controls
OPEN
D
I
S
C
+
PTY
-
P
DSPL
R
S
T
+
MENU
MODE
D-BASS
TA
SOURCE
-
SEEK/AMS
AF
SOUND
ENTER
P
R
S
REP SHUF
T
-
-
D
I
S
C
–
OFF
1 2 3 4 56
Refer to the pages listed for details.
1 MENU button
qd Reset button (located on the front side
9, 11, 12, 13, 15, 17, 19, 22, 24
of the unit behind the front panel) 7
2 Volume control dial
qf SEEK/AMS –/+ (cursor left/right) buttons
1
1
8, 9, 10, 11, 12, 13, 15, 17, 19, 21, 22, 24, 25
3 SOURCE (TUNER/TAPE/CD*
/MD*
)
button 8, 10, 12, 13, 16, 23
Seek 13, 15
Automatic Music Sensor 10, 25
4 XR-C5300RX/C5300RV/C5300R/C5200R:
PRST/DISC +/– (cursor up/down) buttons
Manual search 13, 25
8, 9, 11, 12, 13, 15, 17, 18, 19, 22, 24
qg ENTER button
XR-4300RX/4300RV/4300R/4200R:
9, 11, 12, 13, 15, 17, 18, 19, 22, 24
PRST +/– (cursor up/down) buttons
qh Receptor for the card remote
8, 9, 11, 12, 13, 15, 17, 18, 19, 22, 24
3
commander*
During radio reception:
qj Number buttons
Preset stations select 13
During radio reception:
1
During CD/MD playback*
:
Preset number select 12, 13, 16, 17
Disc change 25
During tape playback:
5 DSPL/PTY (display mode change/
(1) REP 11
programme type) button
1
11, 14, 18, 23, 24
During CD/MD playback*
:
(1) REP 25
6 MODE button 10, 11, 12, 13, 23
(2) SHUF 25
During tape playback:
Playback direction change 10
qk AF button 15, 17
During radio reception:
ql TA button 16, 17
BAND select 12
1
1
*
XR-C5300RX/C5300RV/C5300R/C5200R
During CD/MD playback*
:
only
CD/MD unit select 23
2
*
Warning when installing in a car
7 Display window
without ACC (accessory) position on
8
Z (eject) button (located on the front side
the ignition key switch
Be sure to press (OFF) on the unit for
of the unit behind the front panel)
10
two seconds to turn off the clock display
9 OPEN button 7, 10, 26
after turning off the engine.
q; D-BASS button 23
When you press (OFF) only momentarily,
the clock display does not turn off and this
qa SOUND button 21
causes battery wear.
2
qs OFF button*
7, 8, 10
3
*
XR-C5300RX/C5300RV/C5300R/C5200R/
4300RX/4300RV/4300R only
5
Optional
Card remote commander RM-X91
The corresponding buttons of the card
remote commander control the same
OPEN/CLOSE
functions as those on this unit.
OFF
1 OFF button
2 MENU button
MENU LIST
DISC
SEEK SEEK
3 SOURCE button
SOURCE
4 SEEK/AMS (cursor </,) button
5 SOUND button
SOUND
DISC
ENTER
6 DSPL/PTY button
7 ATT button
DSPL MODE
8 LIST button (Not available for this model)
VOLATT
9 DISC/PRST (cursor M/m) button
q; ENTER button
qa MODE button
qs VOL button
A unit turned off by pressing (OFF) for two seconds cannot be operated with the card remote
commander unless (SOURCE) on the unit is pressed or a cassette is inserted to activate the unit
first.
Replacing the lithium battery
Notes on lithium battery
When the battery becomes weak, the range of
•Keep the lithium battery out of the reach of
the card remote commander becomes shorter.
children. Should the battery be swallowed,
Replace the battery with a new CR2025 lithium
immediately consult a doctor.
battery.
•Wipe the battery with a dry cloth to assure a
good contact.
•Be sure to observe the correct polarity when
installing the battery.
•Do not hold the battery with metallic
tweezers, otherwise a short-circuit may
occur.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
x
+ side up
6
Attaching the front panel
Place the hole A of the front panel onto the
spindle B on the unit as illustrated, then push
Getting Started
the left side in.
Resetting the unit
A
B
Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Remove the front panel and press the reset
button with a pointed object, such as a
ballpoint pen.
Reset button
x
Note
Pressing the reset button will erase the clock
setting and some memorised functions.
Detaching the front panel
You can detach the front panel of this unit to
protect the unit from being stolen.
Notes
• Be careful not to attach the front panel upside
1 Press (OFF).
down.
• Do not press the front panel too hard against the
unit when attaching it.
2 Press (OPEN), then slide the front panel
• Do not press too hard or put excessive pressure
to the right side, and pull out from the
on the display window of the front panel.
left side.
• Do not expose the front panel to direct sunlight
or heat sources such as hot air ducts, and do not
leave it in a humid place. Never leave it on the
dashboard of a car parked in direct sunlight or
where there may be a considerable rise in
temperature.
1
Caution alarm
2
If you turn the car ignition off without
removing the front panel, the caution alarm
will beep for a few seconds.
Notes
If you connect an optional power amplifier and
• Be sure not to drop the panel when detaching it
do not use the built-in amplifier, the beep
from the unit.
sound will be deactivated.
•If you detach the panel while the unit is still
turned on, the power will turn off automatically
to prevent the speakers from being damaged.
•When you carry the front panel with you, use the
supplied front panel case.
7
Turning the unit on/off
How to use the menu
Turning on the unit
This unit is operated by selecting items from a
menu.
Press (SOURCE) or insert a cassette in the
To select, first enter the menu mode and
unit. For details on operation, refer to page 10
choose up/down (+/– of (PRST/DISC) or
(cassette player) and page 12 (radio).
(PRST)), or choose left/right (–/+ of
(SEEK/AMS)).
Turning off the unit
Press (OFF) to stop tape playback or FM/
(PRST/DISC)/(PRST)
MW/LW reception (the key illumination and
display remains on.)
(+) : To select upwards
Press (OFF) for two seconds to completely
turn off the unit.
SOURCE
Note
If your car has no ACC position on the ignition key
(–) : To select downwards
switch, be sure to turn the unit off by pressing
(OFF) for two seconds to avoid car battery wear.
(SEEK/AMS)
SOURCE
(–) : To select
(+) : To select
leftwards
rightwards
8
2 Press (ENTER).
Setting the clock
The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
The clock starts.
1 Press (MENU), then press either side of
(PRST/DISC) or (PRST) repeatedly until
After the clock setting is complete, the
“CLOCK” appears.
display returns to normal playback mode.
Tips
• You can use the convenient CT function to set
the clock automatically (page 19).
• When the D.INFO mode is set to ON, the time is
always displayed (page 22).
1 Press (ENTER).
The hour indication flashes.
2 Press either side of (PRST/DISC) or
(PRST) to set the hour.
3 Press (+) side of (SEEK/AMS).
The minute indication flashes.
4 Press either side of (PRST/DISC) or
(PRST) to set the minute.
9
Fast-winding the tape
During playback, press and hold either
Cassette Player
side of (SEEK/AMS).
SOURCE
Listening to a tape
Rewind
Fast-forward
1 Press (OPEN) and insert a cassette.
Playback starts automatically.
To start playback during fast-forwarding or
rewinding, press (MODE) (o).
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) momentarily for each track
you want to skip.
2 Close the front panel.
You can skip up to nine tracks at one time.
If a cassette is already inserted, to start
playback, press (SOURCE) repeatedly until
To locate
To locate
“FWD” or “REV” appears.
preceding
SOURCE
succeeding
The side facing up is played.
tracks
tracks
Note
The AMS function may not work when:
— the blanks between tracks are shorter than
four seconds
The side facing down is played.
— there is noise between tracks
— there are long sections of low volume or quiet
sections.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Tip
Tip
To change the tape‘s playback direction, press
The Motion Display mode can be turned off. (See
(MODE) (o).
“Changing the sound and display settings” on
page 22.)
To Press
Stop playback (OFF)
Eject the cassette (OPEN) then Z
10
Playing a tape in various
modes
You can play the tape in various modes:
•REP (Repeat Play) repeats the current track.
•METAL (Metal)* lets you play a metal or
MODE
CrO2 tape.
•BL SKP (Blank Skip) skips blanks longer than
eight seconds.
•ATA (Automatic Tuner Activation) turns on
the tuner automatically when fast-winding
the tape.
1 During playback, press (MENU).
2 Press either side of (PRST/DISC) or
(PRST) repeatedly until the desired item
appears.
Each time you press (–) side of (PRST/DISC)
or (PRST), the item changes as follows:
METAL*t BL SKP t ATA
* XR-C5300RX/C5300RV/C5300R/C5200R/4300RX/
4300RV/4300R only
3 Press (+) side of (SEEK/AMS) to select
“ON.”
Play mode starts.
4 Press (ENTER).
To return to normal playback mode, select
“OFF” in step 3.
Tip
While the ATA function is activated, the display
(TAPE y TUNER) can be changed by pressing
(DSPL/PTY) or (DSPL).
11
DSPL
Playing tracks repeatedly
— Repeat Play
During playback, press (1) (REP)
repeatedly until “REP-ON” in the display
appears.
REP-ON y REP-OFF
-
SEEK/AMS
ENTER
REP SHUF
1 2 3 4 56
Repeat Play starts.
To return to normal playback mode, select
“REP-OFF.”
Tip
During repeat playback, press (MODE). “REP”
disappears from the display and repeat mode is
cancelled.
Memorising only the
Radio
desired stations
You can preset up to 18 FM stations (6 each for
FM1, 2, and 3), up to 6 MW stations, and up to
6 LW stations in the order of your choice.
Memorising stations
automatically
1 Press (SOURCE) repeatedly to select the
tuner.
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
2 Press (MODE) repeatedly to select the
signals and memorises them in the order of
band.
their frequencies. You can store up to 6 stations
on each band (FM1, FM2, FM3, MW, and LW).
3 Press either side of (SEEK/AMS) to tune
Caution
in the station that you want to store on
When tuning in stations while driving, use
the number button.
Best Tuning Memory to prevent accidents.
4 Press the desired number button ((1) to
1 Press (SOURCE) repeatedly to select the
(6)) until “MEM” appears.
tuner.
The number button indication appears in
Each time you press (SOURCE), the source
the display.
changes as follows:
B TUNER B CD* B MD* B TAPE
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
* If the corresponding optional equipment is
not connected, this item will not appear
(XR-C5300RX/C5300RV/C5300R/C5200R only).
2 Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
B FM1 B FM2 B FM3 B MW B LW
3 Press (MENU), then press either side of
(PRST/DISC) or (PRST) repeatedly until
“BTM” appears.
4 Press (ENTER).
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.
Notes
•The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
setting.
•When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
12
If FM stereo reception is poor
Receiving the memorised
— Monaural Mode
stations
1 During radio reception, press (MENU),
then press either side of (PRST/DISC) or
(PRST) repeatedly until “MONO”
1 Press (SOURCE) repeatedly to select the
appears.
tuner.
2 Press (+) side of (SEEK/AMS) until
2 Press (MODE) repeatedly to select the
“MONO-ON“ appears.
band.
The sound improves, but becomes
monaural (“ST” disappears).
3 Press the number button ((1) to (6)) on
which the desired station is stored.
3 Press (ENTER).
Tip
To return to normal mode, select
Press either side of (PRST/DISC) or (PRST) to
receive the stations in the order they are stored in
“MONO-OFF” in step 2.
the memory (Preset Search Function).
If you cannot tune in a preset
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
station
Press either side of (SEEK/AMS) to search
Tip
for the station (automatic tuning).
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
Scanning stops when the unit receives a
page 22.)
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(MENU), then press either side of (PRST/DISC) or
(PRST) repeatedly until “LOCAL” (local seek
mode) is displayed. Then press (+) side of
(SEEK/AMS) to select “LOCAL-ON.” Press (ENTER).
During local reception and station selection,
“L.SEEK” appears in the display.
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, press and hold either side of
(SEEK/AMS) until the desired frequency appears
(manual tuning).
13
Changing the display item
Each time you press (DSPL/PTY), the item
changes as follows:
RDS
Station name* (Frequency) y Programme type
* When you tune in an FM station that transmits
RDS data, the station name appears.
Overview of the RDS
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
function
Tip
Radio Data System (RDS) is a broadcasting
The Motion Display mode can be turned off. (See
service that allows FM stations to send
“Changing the sound and display settings” on
additional digital information along with the
page 22.)
regular radio programme signal. Your car
stereo offers you a variety of services. Here are
just a few: retuning the same programme
automatically, listening to traffic
announcements, and locating a station by
programme type.
Notes
• Depending on the country or region, not all of
the RDS functions are available.
• RDS may not work properly if the signal strength
is weak or if the station you are tuned to is not
transmitting RDS data.
Displaying the station
name
The name of the current station lights up in the
display.
Select an FM station (page 12).
When you tune in an FM station that
transmits RDS data, the station name
appears in the display.
Notes
• The “*” indication means that an RDS station is
being received.
•“NO NAME” appears if the received station does
not transmit RDS data.
14
Changing the display item
Retuning the same
Each time you press (AF), the item changes as
follows:
programme automatically
AF-ON y AF-OFF
— Alternative Frequencies (AF)
Notes
The Alternative Frequencies (AF) function
• When “NO AF” and the station name flash
automatically selects and retunes the station
alternately, it means that the unit cannot find an
with the strongest signal in a network. By
alternative station in the network.
• If the station name starts flashing after selecting
using this function, you can continuously
a station with the AF function on, this indicates
listen to the same programme during a long-
that no alternative frequency is available. Press
distance drive without having to retune the
either side of (SEEK/AMS) while the station name
station manually.
is flashing (within eight seconds). The unit starts
searching for another frequency with the same PI
Frequencies change automatically.
(Programme Identification) data (“PI SEEK”
appears and no sound is heard). If the unit
98.5MHz
96.0MHz
cannot find another frequency, “NO PI” appears,
and the unit returns to the previously selected
frequency.
Listening to a regional programme
The “REG-ON” (regional on) function lets you
Station
stay tuned to a regional programme without
being switched to another regional station.
(Note that you must turn the AF function on.)
102.5MHz
The unit is factory preset to “REG-ON,” but if
you want to turn off the function, do the
following.
1 Select an FM station (page 12).
1 During radio reception, press (MENU),
2 Press (AF) repeatedly until “AF-ON”
then press either side of (PRST/DISC) or
appears.
(PRST) repeatedly until “REG” appears.
The unit starts searching for an alternative
station with a stronger signal in the same
2 Press (+) side of (SEEK/AMS) until
network.
“REG-OFF” appears.
Note
When there is no alternative station in the area
3 Press (ENTER).
and you do not need to search for an alternative
Note that selecting “REG-OFF” might cause
station, turn the AF function off by pressing (AF)
the unit to switch to another regional
repeatedly until “AF-OFF” appears.
station within the same network.
To return to regional on, select “REG-ON” in
step 2.
Note
This function does not work in the United
Kingdom and in some other areas.
continue to next page t
15
Local link function
To cancel the current traffic
(United Kingdom only)
announcement
The Local Link function lets you select other
Press (TA) or (SOURCE).
local stations in the area, even if they are not
To cancel all traffic announcements, turn off
stored on your number buttons.
the function by pressing (TA) until
“TA-OFF” appears.
1 Press a number button that has a local
station stored on it.
Presetting the volume of traffic
announcements
2 Within five seconds, press the number
You can preset the volume level of the traffic
button of the local station again.
announcements beforehand so you won’t
miss the announcement. When a traffic
announcement starts, the volume will be
3 Repeat this procedure until the desired
automatically adjusted to the preset level.
local station is received.
1 Select the desired volume level.
2 Press (TA) for two seconds.
Listening to traffic
“TA” appears and the setting is stored.
announcements
Receiving emergency
The Traffic Announcement (TA) and Traffic
announcements
Programme (TP) data let you automatically
If an emergency announcement comes in while
tune in an FM station that is broadcasting
you are listening to the radio, the programme
traffic announcements even if you are listening
will automatically switch to it. If you are
to other programme sources.
listening to a source other than the radio, the
emergency announcements will be heard if
Press (TA) repeatedly until “TA-ON”
you set AF or TA to on. The unit will then
appears.
automatically switch to these announcements
The unit starts searching for traffic
no matter which source you are listening to at
information stations. “TP” appears in the
the time.
display when the unit finds a station
broadcasting traffic announcements.
When the traffic announcement starts,
“TA” flashes. The flashing stops when the
traffic announcement is over.
Tip
If the traffic announcement starts while you are
listening to another programme source, the unit
automatically switches to the announcement and
goes back to the original source when the
announcement is over.
Notes
•
“NO TP” flashes for five seconds if the received
station does not broadcast traffic announcements.
Then, the unit starts searching for a station that
broadcasts it.
• When “EON” appears with “TP” in the display,
the current station makes use of broadcast traffic
announcements by other stations in the same
network.
16
Presetting different settings for
Presetting the RDS
each preset station
stations with the AF and
1 Select an FM band, and tune in the
desired station.
TA data
2 Press (AF) and/or (TA) to select “AF-ON”
When you preset RDS stations, the unit stores
and/or “TA-ON.”
each station’s data as well as its frequency, so
you don’t have to turn on the AF or TA
function every time you tune in the preset
3 Press the desired number button and
station. You can select a different setting (AF,
hold until “MEM” appears.
TA, or both) for individual preset stations, or
Repeat from step 1 to preset other stations.
the same setting for all preset stations.
Tip
Presetting the same setting for all
If you want to change the preset AF and/or TA
setting after you tune in the preset station, you
preset stations
can do so by turning the AF or TA function on or
off.
1 Select an FM band (page 12).
2 Press (AF) and/or (TA) to select “AF-ON”
and/or “TA-ON.”
Note that selecting “AF-OFF” or “TA-OFF”
stores not only RDS stations, but also
non-RDS stations.
3 Press (MENU), then press either side of
(PRST/DISC) or (PRST) repeatedly until
“BTM” appears.
4 Press (+) side of (SEEK/AMS) until “BTM”
flashes.
5 Press (ENTER).
17
1 Press (DSPL/PTY) during FM reception
Locating a station by
until “PTY” appears.
programme type
You can locate the station you want by
selecting one of the programme types shown
below.
The current programme type name appears
if the station is transmitting the PTY data.
“- - - - -” appears if the received station is
Programme types Display
not an RDS station, or if the RDS data has
News NEWS
not been received.
Current Affairs AFFAIRS
Information INFO
2 Press either side of (PRST/DISC) or
Sports SPORT
(PRST) repeatedly until the desired
programme type appears.
Education EDUCATE
The programme types appear in the order
Drama DRAMA
shown in the above table. Note that you
Culture CULTURE
cannot select “NONE” (Not specified) for
Science SCIENCE
searching.
Varied VARIED
Popular Music POP M
Rock Music ROCK M
Easy Listening EASY M
3 Press (ENTER).
Light Classical LIGHT M
The unit starts searching for a station
Classical CLASSICS
broadcasting the selected programme type.
Other Music Type OTHER M
Weather WEATHER
Finance FINANCE
Children’s Programmes CHILDREN
Social Affairs SOCIAL A
Religion RELIGION
Phone In PHONE IN
Travel TRAVEL
Leisure LEISURE
Jazz Music JAZZ
Country Music COUNTRY
National Music NATION M
Oldies Music OLDIES
Folk Music FOLK M
Documentary DOCUMENT
Not specified NONE
Note
You cannot use this function in some countries
where no PTY (Programme Type selection) data is
available.
18
Setting the clock
Other Functions
automatically
The CT (Clock Time) data from the RDS
You can also control this unit with the rotary
transmission sets the clock automatically.
commander.
1 During radio reception, press (MENU),
then press either side of (PRST/DISC) or
(PRST) repeatedly until “CT” appears.
Labelling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate label as
2 Press (+) side of (SEEK/AMS) repeatedly
shown in the illustration below.
until “CT-ON” appears.
The clock is set.
SOUND
3 Press (ENTER) to return to the normal
MODE
DSPL
display.
To cancel the CT function
Select “CT-OFF” in step 2.
Notes
• The CT function may not work even though an
DSPL
RDS station is being received.
MODE
• There might be a difference between the time
SOUND
set by the CT function and the actual time.
19
By rotating the control
Using the rotary
(the SEEK/AMS control)
commander
The rotary commander works by pressing
buttons and/or rotating controls.
XR-C5300RX/C5300RV/C5300R/C5200R
only:
You can also control the optional CD or MD
units with the rotary commander.
By pressing buttons
Rotate the control and release it to:
(the SOURCE and MODE buttons)
•Locate the beginnings of tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To start
playback while fast-winding the tape,
press (MODE).
(SOURCE)
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
(MODE)
hold the control to find a specific station.
By pushing in and rotating the
Each time you press (SOURCE), the
control (the PRESET/DISC control)
source changes as follows:
TUNER t CD* t MD* t TAPE
Pressing (MODE) changes the operation
in the following ways;
• Tuner : FM1 t FM2 t FM3 t MW
t LW
• Tape : playback direction
• CD unit* : CD1 t CD2 t …
• MD unit* : MD1 t MD2 t …
Push in and rotate the control to:
* If the corresponding optional equipment is
•Receive the stations memorised on the
not connected, the item will not appear
number buttons.
(XR-C5300RX/C5300RV/C5300R/C5200R only).
•Change the disc.
Other operations
Rotate the VOL control to
adjust the volume.
Press (ATT) to
attenuate the
sound.
OFF
Press (OFF) to turn
off the unit.
Note
When installing in a car without ACC (accessory)
position on the ignition key switch, press (OFF) for
two seconds to turn off the clock display after
turning off the engine.
20