Sony XR-4300RV: инструкция

3-044-359-42 (1)

FM/MW/LW

FM/MW/LW Cassette Car Stereo

Cassette

Car Stereo

GB

Operating Instructions

CZ

Návod k obsluze

PL

Instrukcje Obsługi

TR

Kullanım kılavuzu

RU

Инструкция по эксплуатации

For installation and connections, see the supplied installation/connections

manual.

Informace o instalaci a zapojení naleznete v přiložené příručce Instalace /

zapojení.

Szczegóły dotyczące instalacji i podłączeń, proszę sprawdzić w dostarczonym,

osobnym podręczniku.

Kurma ve bağlantı işlemleri için ünite beraberindeki Kurma/Bağlantılar kılavuzuna

bakınız.

Перед установкой и подключениями обратитесь к прилагаемой инструкции

по установке и соединению.

XR-C5300RX XR-4300RX

XR-C5300RV XR-4300RV

XR-C5300R XR-4300R

XR-C5200R XR-4200R

 2000 Sony Corporation

Welcome !

Precautions

Thank you for purchasing this Sony Cassette

• If your car was parked in direct sunlight

Player. This unit lets you enjoy a variety of

resulting in a considerable rise in

features using the following controller

temperature inside the car, allow the unit to

accessory:

cool off before operating it.

• If no power is being supplied to the unit,

Optional accessory

check the connections first. If everything is

Rotary commander RM-X4S

in order, check the fuse.

Card remote commander RM-X91

• If no sound comes from the speakers of a

(XR-C5300RX/C5300RV/C5300R/C5200R/

two-speaker system, set the fader control to

4300RX/4300RV/4300R only)

the centre position.

• When a tape is played back for a long

XR-C5300RX/C5300RV/C5300R/C5200R

period, the cassette may become warm

only:

because of the built-in power amplifier.

In addition to the cassette playback and radio

However, this is not a sign of malfunction.

operations, you can expand your system by

1

connecting an optional CD/MD unit*

.

If you have any questions or problems

When you operate this unit or a connected

concerning your unit that are not covered in

optional CD unit with the CD TEXT function,

this manual, please consult your nearest Sony

the CD TEXT information will appear in the

2

dealer.

display when you play a CD TEXT disc*

.

1

*

You can connect a CD changer, an MD changer,

To maintain high quality sound

a CD player, or an MD player.

If you have drink holders near your audio

2

*

A CD TEXT disc is an audio CD that includes

equipment, be careful not to splash juice or

information such as the disc name, artist name,

other soft drinks onto the car audio. Sugary

and track names.

residues on this unit or cassette tapes may

This information is recorded on the disc.

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

2

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

Notes on Cassettes

not recommended except for long continuous

play. The tape used for these cassettes is very

Cassette care

thin and tends to stretch easily. Frequent

• Do not touch the tape surface of a cassette, as

playing and stopping of these tapes may cause

any dirt or dust will contaminate the heads.

them to become entangled in the cassette deck

• Keep cassettes away from equipment with

mechanism.

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

Slack

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

• The sound may become distorted while

playing the cassette. The cassette player head

should be cleaned after each 50 hours of use.

3

Table of Contents

This Unit Only

With Optional Equipment

Location of controls................................................. 5

CD/MD Unit (XR-C5300RX/

C5300RV/C5300R/C5200R only)

Getting Started

Playing a CD or MD ......................................... 23

Resetting the unit ................................................ 7

Playing tracks repeatedly

Detaching the front panel .................................. 7

— Repeat Play .............................................. 25

Turning the unit on/off...................................... 8

Playing tracks in random order

How to use the menu ......................................... 8

— Shuffle Play.............................................. 25

Setting the clock .................................................. 9

Cassette Player

Listening to a tape............................................. 10

Playing a tape in various modes......................11

Radio

Memorising stations automatically

— Best Tuning Memory (BTM).................. 12

Memorising only the desired stations............ 12

Receiving the memorised stations .................. 13

RDS

Overview of the RDS function ........................ 14

Displaying the station name............................ 14

Retuning the same programme automatically

— Alternative Frequencies (AF) ................ 15

Listening to traffic announcements ................ 16

Presetting the RDS stations with the AF and

TA data .......................................................... 17

Locating a station by programme type.......... 18

Setting the clock automatically ....................... 19

Other Functions

Additional Information

Labelling the rotary commander .................... 19

Maintenance....................................................... 26

Using the rotary commander .......................... 20

Dismounting the unit ....................................... 27

Adjusting the sound characteristics ............... 21

Specifications ..................................................... 28

Attenuating the sound ..................................... 21

Troubleshooting guide ..................................... 29

Changing the sound and display settings ..... 22

Boosting the bass sound

— D-bass ....................................................... 23

4

Location of controls

OPEN

D

I

S

C

+

PTY

-

P

DSPL

R

S

T

+

MENU

MODE

D-BASS

TA

SOURCE

-

SEEK/AMS

AF

SOUND

ENTER

P

R

S

REP SHUF

T

-

-

D

I

S

C

–

OFF

1 2 3 4 56

Refer to the pages listed for details.

1 MENU button

qd Reset button (located on the front side

9, 11, 12, 13, 15, 17, 19, 22, 24

of the unit behind the front panel) 7

2 Volume control dial

qf SEEK/AMS –/+ (cursor left/right) buttons

1

1

8, 9, 10, 11, 12, 13, 15, 17, 19, 21, 22, 24, 25

3 SOURCE (TUNER/TAPE/CD*

/MD*

)

button 8, 10, 12, 13, 16, 23

Seek 13, 15

Automatic Music Sensor 10, 25

4 XR-C5300RX/C5300RV/C5300R/C5200R:

PRST/DISC +/– (cursor up/down) buttons

Manual search 13, 25

8, 9, 11, 12, 13, 15, 17, 18, 19, 22, 24

qg ENTER button

XR-4300RX/4300RV/4300R/4200R:

9, 11, 12, 13, 15, 17, 18, 19, 22, 24

PRST +/– (cursor up/down) buttons

qh Receptor for the card remote

8, 9, 11, 12, 13, 15, 17, 18, 19, 22, 24

3

commander*

During radio reception:

qj Number buttons

Preset stations select 13

During radio reception:

1

During CD/MD playback*

:

Preset number select 12, 13, 16, 17

Disc change 25

During tape playback:

5 DSPL/PTY (display mode change/

(1) REP 11

programme type) button

1

11, 14, 18, 23, 24

During CD/MD playback*

:

(1) REP 25

6 MODE button 10, 11, 12, 13, 23

(2) SHUF 25

During tape playback:

Playback direction change 10

qk AF button 15, 17

During radio reception:

ql TA button 16, 17

BAND select 12

1

1

*

XR-C5300RX/C5300RV/C5300R/C5200R

During CD/MD playback*

:

only

CD/MD unit select 23

2

*

Warning when installing in a car

7 Display window

without ACC (accessory) position on

8

Z (eject) button (located on the front side

the ignition key switch

Be sure to press (OFF) on the unit for

of the unit behind the front panel)

10

two seconds to turn off the clock display

9 OPEN button 7, 10, 26

after turning off the engine.

q; D-BASS button 23

When you press (OFF) only momentarily,

the clock display does not turn off and this

qa SOUND button 21

causes battery wear.

2

qs OFF button*

7, 8, 10

3

*

XR-C5300RX/C5300RV/C5300R/C5200R/

4300RX/4300RV/4300R only

5

Optional

Card remote commander RM-X91

The corresponding buttons of the card

remote commander control the same

OPEN/CLOSE

functions as those on this unit.

OFF

1 OFF button

2 MENU button

MENU LIST

DISC

SEEK SEEK

3 SOURCE button

SOURCE

4 SEEK/AMS (cursor </,) button

5 SOUND button

SOUND

DISC

ENTER

6 DSPL/PTY button

7 ATT button

DSPL MODE

8 LIST button (Not available for this model)

VOLATT

9 DISC/PRST (cursor M/m) button

q; ENTER button

qa MODE button

qs VOL button

A unit turned off by pressing (OFF) for two seconds cannot be operated with the card remote

commander unless (SOURCE) on the unit is pressed or a cassette is inserted to activate the unit

first.

Replacing the lithium battery

Notes on lithium battery

When the battery becomes weak, the range of

•Keep the lithium battery out of the reach of

the card remote commander becomes shorter.

children. Should the battery be swallowed,

Replace the battery with a new CR2025 lithium

immediately consult a doctor.

battery.

•Wipe the battery with a dry cloth to assure a

good contact.

•Be sure to observe the correct polarity when

installing the battery.

•Do not hold the battery with metallic

tweezers, otherwise a short-circuit may

occur.

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

x

+ side up

6

Attaching the front panel

Place the hole A of the front panel onto the

spindle B on the unit as illustrated, then push

Getting Started

the left side in.

Resetting the unit

A

B

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Reset button

x

Note

Pressing the reset button will erase the clock

setting and some memorised functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Notes

• Be careful not to attach the front panel upside

1 Press (OFF).

down.

• Do not press the front panel too hard against the

unit when attaching it.

2 Press (OPEN), then slide the front panel

• Do not press too hard or put excessive pressure

to the right side, and pull out from the

on the display window of the front panel.

left side.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

1

Caution alarm

2

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

Notes

If you connect an optional power amplifier and

• Be sure not to drop the panel when detaching it

do not use the built-in amplifier, the beep

from the unit.

sound will be deactivated.

•If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

•When you carry the front panel with you, use the

supplied front panel case.

7

Turning the unit on/off

How to use the menu

Turning on the unit

This unit is operated by selecting items from a

menu.

Press (SOURCE) or insert a cassette in the

To select, first enter the menu mode and

unit. For details on operation, refer to page 10

choose up/down (+/– of (PRST/DISC) or

(cassette player) and page 12 (radio).

(PRST)), or choose left/right (–/+ of

(SEEK/AMS)).

Turning off the unit

Press (OFF) to stop tape playback or FM/

(PRST/DISC)/(PRST)

MW/LW reception (the key illumination and

display remains on.)

(+) : To select upwards

Press (OFF) for two seconds to completely

turn off the unit.

SOURCE

Note

If your car has no ACC position on the ignition key

(–) : To select downwards

switch, be sure to turn the unit off by pressing

(OFF) for two seconds to avoid car battery wear.

(SEEK/AMS)

SOURCE

(–) : To select

(+) : To select

leftwards

rightwards

8

2 Press (ENTER).

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

The clock starts.

1 Press (MENU), then press either side of

(PRST/DISC) or (PRST) repeatedly until

After the clock setting is complete, the

“CLOCK” appears.

display returns to normal playback mode.

Tips

• You can use the convenient CT function to set

the clock automatically (page 19).

• When the D.INFO mode is set to ON, the time is

always displayed (page 22).

1 Press (ENTER).

The hour indication flashes.

2 Press either side of (PRST/DISC) or

(PRST) to set the hour.

3 Press (+) side of (SEEK/AMS).

The minute indication flashes.

4 Press either side of (PRST/DISC) or

(PRST) to set the minute.

9

Local link function

To cancel the current traffic

(United Kingdom only)

announcement

The Local Link function lets you select other

Press (TA) or (SOURCE).

local stations in the area, even if they are not

To cancel all traffic announcements, turn off

stored on your number buttons.

the function by pressing (TA) until

“TA-OFF” appears.

1 Press a number button that has a local

station stored on it.

Presetting the volume of traffic

announcements

2 Within five seconds, press the number

You can preset the volume level of the traffic

button of the local station again.

announcements beforehand so you won’t

miss the announcement. When a traffic

announcement starts, the volume will be

3 Repeat this procedure until the desired

automatically adjusted to the preset level.

local station is received.

1 Select the desired volume level.

2 Press (TA) for two seconds.

Listening to traffic

“TA” appears and the setting is stored.

announcements

Receiving emergency

The Traffic Announcement (TA) and Traffic

announcements

Programme (TP) data let you automatically

If an emergency announcement comes in while

tune in an FM station that is broadcasting

you are listening to the radio, the programme

traffic announcements even if you are listening

will automatically switch to it. If you are

to other programme sources.

listening to a source other than the radio, the

emergency announcements will be heard if

Press (TA) repeatedly until “TA-ON”

you set AF or TA to on. The unit will then

appears.

automatically switch to these announcements

The unit starts searching for traffic

no matter which source you are listening to at

information stations. “TP” appears in the

the time.

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

•

“NO TP” flashes for five seconds if the received

station does not broadcast traffic announcements.

Then, the unit starts searching for a station that

broadcasts it.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcements by other stations in the same

network.

16

Presetting different settings for

Presetting the RDS

each preset station

stations with the AF and

1 Select an FM band, and tune in the

desired station.

TA data

2 Press (AF) and/or (TA) to select “AF-ON”

When you preset RDS stations, the unit stores

and/or “TA-ON.”

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

3 Press the desired number button and

station. You can select a different setting (AF,

hold until “MEM” appears.

TA, or both) for individual preset stations, or

Repeat from step 1 to preset other stations.

the same setting for all preset stations.

Tip

Presetting the same setting for all

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

preset stations

can do so by turning the AF or TA function on or

off.

1 Select an FM band (page 12).

2 Press (AF) and/or (TA) to select “AF-ON”

and/or “TA-ON.”

Note that selecting “AF-OFF” or “TA-OFF”

stores not only RDS stations, but also

non-RDS stations.

3 Press (MENU), then press either side of

(PRST/DISC) or (PRST) repeatedly until

“BTM” appears.

4 Press (+) side of (SEEK/AMS) until “BTM”

flashes.

5 Press (ENTER).

17

1 Press (DSPL/PTY) during FM reception

Locating a station by

until “PTY” appears.

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

Programme types Display

not an RDS station, or if the RDS data has

News NEWS

not been received.

Current Affairs AFFAIRS

Information INFO

2 Press either side of (PRST/DISC) or

Sports SPORT

(PRST) repeatedly until the desired

programme type appears.

Education EDUCATE

The programme types appear in the order

Drama DRAMA

shown in the above table. Note that you

Culture CULTURE

cannot select “NONE” (Not specified) for

Science SCIENCE

searching.

Varied VARIED

Popular Music POP M

Rock Music ROCK M

Easy Listening EASY M

3 Press (ENTER).

Light Classical LIGHT M

The unit starts searching for a station

Classical CLASSICS

broadcasting the selected programme type.

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children’s Programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Not specified NONE

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

18

Setting the clock

Other Functions

automatically

The CT (Clock Time) data from the RDS

You can also control this unit with the rotary

transmission sets the clock automatically.

commander.

1 During radio reception, press (MENU),

then press either side of (PRST/DISC) or

(PRST) repeatedly until “CT” appears.

Labelling the rotary

commander

Depending on how you mount the rotary

commander, attach the appropriate label as

2 Press (+) side of (SEEK/AMS) repeatedly

shown in the illustration below.

until “CT-ON” appears.

The clock is set.

SOUND

3 Press (ENTER) to return to the normal

MODE

DSPL

display.

To cancel the CT function

Select “CT-OFF” in step 2.

Notes

• The CT function may not work even though an

DSPL

RDS station is being received.

MODE

• There might be a difference between the time

SOUND

set by the CT function and the actual time.

19

By rotating the control

Using the rotary

(the SEEK/AMS control)

commander

The rotary commander works by pressing

buttons and/or rotating controls.

XR-C5300RX/C5300RV/C5300R/C5200R

only:

You can also control the optional CD or MD

units with the rotary commander.

By pressing buttons

Rotate the control and release it to:

(the SOURCE and MODE buttons)

•Locate the beginnings of tracks on the

tape. Rotate and hold the control, and

release it to fast-wind the tape. To start

playback while fast-winding the tape,

press (MODE).

(SOURCE)

•Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and

(MODE)

hold the control to find a specific station.

By pushing in and rotating the

Each time you press (SOURCE), the

control (the PRESET/DISC control)

source changes as follows:

TUNER t CD* t MD* t TAPE

Pressing (MODE) changes the operation

in the following ways;

• Tuner : FM1 t FM2 t FM3 t MW

t LW

• Tape : playback direction

• CD unit* : CD1 t CD2 t …

• MD unit* : MD1 t MD2 t …

Push in and rotate the control to:

* If the corresponding optional equipment is

•Receive the stations memorised on the

not connected, the item will not appear

number buttons.

(XR-C5300RX/C5300RV/C5300R/C5200R only).

•Change the disc.

Other operations

Rotate the VOL control to

adjust the volume.

Press (ATT) to

attenuate the

sound.

OFF

Press (OFF) to turn

off the unit.

Note

When installing in a car without ACC (accessory)

position on the ignition key switch, press (OFF) for

two seconds to turn off the clock display after

turning off the engine.

20