Sony KV-21FX20R: инструкция

4-204-906-91(1)

R

FD Trinitron

Colour Television

GB

Instruction Manual

RU

Сборник инструкций

BG

Инструкции за експлоатация

KV-21FX20R

©1999 by Sony Corporation Printed in Spain

2

GB

Instruction Manual

Thank you for choosing this Sony TV.

Before operating the TV, please read this manual thoroughly and retain it for

future reference.

Keys to read this Instruction Manual:

• Use Getting Started if you wish to install the TV set and to get familiar with the

basic functions.

• Use Advanced Operation if you wish to know more about the additional features

of the TV set.

• Symbols used in the manual:

• Informs you of possible hazards

• Important information

• Information on a feature

• 1, 2 ... Sequence of instructions

MENU

• Shaded buttons on the remote control show the buttons you have to

K

press to follow the sequence of instructions.

• Informs you of the result of the instructions.

• The process continues on the next page to get final result.

3

For Your Safety

WARNING

Safety Information

All TVs operate on extremely high voltages. To prevent fire or electric shock, please follow the safety

procedures indicated below.

For General Safety

• Do not expose the TV set to rain or moisture.

• Do not remove the rear cover.

• For your protection, refer all servicing to qualified personnel only.

For Safe Installation

• Do not install the TV in hot, humid or excessively dusty places.

• Do not block or cover the ventilation openings. For ventilation, leave

a space of at least 10 cm all around the set.

• Do not install the TV where it may be exposed to mechanical vibrations.

• Place the TV set only on a stable stand designed for the weight and

dimensions of the TV.

For Safe Operation

• Do not operate the TV set on anything other than a 220-240V AC, 50Hz

supply.

• Do not operate the TV if any liquid or solid objects fall in through the

ventilation slots. Have it checked immediately.

• For environmental and safety reasons, it is recommended that the TV set

is not left in standby mode when not in use. Switch off at the mains.

• Do not disconnect the TV by pulling on the power cable. Disconnect by

removing the mains plug.

• In case of a thunderstorm, disconnect the TV set from the main supply and

the aerial. Otherwise the set may be damaged by a stroke of lightning.

For Maintenance

• Clean the TV screen with a soft dampened cloth. Do not use any abrasive

cleaners.

• Dust and nicotine deposits may cause heat accumulation inside the TV set.

In the long term this could be a safety risk and may shorten the lifetime of

your TV set. Therefore have your set serviced about every five years.

4

For Your Safety

Table of Contents

Table of Contents

Keys to read this Instruction Manual .................................................................................................. 3

For your Safety ........................................................................................................................................ 4

Getting Started

Overview

Checking the Accessories Supplied ......................................................................................... 6

Overview of TV Buttons ........................................................................................................... 6

Overview of Remote Control Buttons ..................................................................................... 7

First Time Operation

Step 1 - Installation

Inserting Batteries into the Remote Control ........................................................................... 8

Connecting the Aerial ................................................................................................................ 8

Switching on the TV .................................................................................................................. 8

Step 2 - Basic Presetting

GB

Selecting Language .................................................................................................................... 9

Automatically Tuning the TV using the Remote Control .................................................. 10

Changing the Programme Order of the TV channels ......................................................... 11

Advanced Operation

Advanced Presetting

Automatically Tuning the TV using the TV buttons ........................................................... 12

Manually Tuning the TV ......................................................................................................... 13

Fine Tuning Channels .............................................................................................................. 14

Adjusting the Picture Rotation ............................................................................................... 15

Skipping Programme positions ............................................................................................. 16

Advanced TV Operation

Adjusting the Picture ............................................................................................................... 17

Adjusting the Sound ................................................................................................................ 18

Using the Sleep Timer ............................................................................................................. 19

Using the Wake Up Timer ....................................................................................................... 20

Teletext

Viewing Teletext ....................................................................................................................... 21

Optional Connections

Using Optional equipment ..................................................................................................... 22

Smartlink ................................................................................................................................... 23

Additional Information

Menu Guide .............................................................................................................................. 24

Troubleshooting ........................................................................................................................ 25

Specifications ............................................................................................................................ 26

Table of Contents

5

Getting Started - Overview

Checking the Accessories Supplied

1

2

3

4

5

6

7

8

9

0

MENU

K

PROGR

Two batteries (R6 type)

RM

887

S

One Remote Control

(RM-887)

Overview of TV Buttons

On/Off Switch

Standby

indicator

Headphone jack Auto Tune button

Phono

Audio

Selecting

Volume

Programme

Video

Inputs

Input

control

Up or Down

Press the flap on the front of the TV

Input

jacks

source

buttons

buttons

to reveal the front control panel

jack

(Selects TV

(press on the mark )

channels)

6

Getting Started - Overview

Getting Started - Overview

Overview of Remote Control Buttons

Muting the Sound

To Temporarily Switch Off TV

Press to mute TV sound.

Press to temporarily switch off TV (the

Press again to restore the sound.

standby indicator

on TV lights up). Press

again to switch on TV from standby mode.

Displaying On Screen Information

To save energy we recommend switching off

Press to display all on-screen indications.

completely when TV is not in use.

Press again to cancel. +.--+++++-++++

After 15-30 minutes without a TV

1

2

3

signal and without any button being

Selecting channels

pressed, the TV switches automatically

Press to select channels.

4

5

6

into standby mode.

For double-digit programme numbers, e.g. 23,

7

8

9

Selecting Input source

press -/-- first, then the buttons 2 and 3.

Press repeatedly until the desired input

If you enter an incorrect first digit, this should

symbol of the source appears on the TV

0

be corrected by entering another digit (0-9)

screen.

MENU

and then selecting -/-- button again to enter

the programme number of your choice.

Back to the channel last watched

+++++++++++++++...

Press to watch the last channel selected

Selecting TV mode

(watched for at least 5 seconds).

Press to switch off Teletext or video input.

K

+++++++++++++++++...

Displaying the menu system

Selecting Teletext

Press to display the menu on the TV screen.

Press to switch on Teletext.

Press again to remove the menu display

from the TV screen.

Selecting Sound mode

PROGR

Press to change the sound mode.

Menu selection

+++++++++++++++++...

Scroll Up

Selecting Picture mode

Scroll Down

Press to change the picture mode.

Previous menu or selection

+++++++++++++++++...

Next menu or selection

Adjusting TV Volume

OK Confirms your selection

RM

887

Press to adjust the volume of the TV.

Selecting Screen format

Press to view programmes in 16:9 mode.

Press again to return to 4:3 mode.

S

This button only works in Teletext mode.

Function

associated to this button does

not work with this TV.

Selecting channels

Press to select the next or previous channel.

Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details,

please refer to the "Teletext" section of this instruction manual.

Getting Started - Overview

7

First Time Operation - Installation

Inserting Batteries into the Remote Control

Make sure to insert the batteries using the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

Connecting the Aerial

Connect a conventional aerial to the socket

marked on the rear of the TV.

Switching on the TV

Connect the TV plug to the mains socket (220-240V AC, 50Hz).

Push in the On/Off switch on the front of the TV.

8

First Time Operation - Installation

First Time Operation - Basic Presetting

Selecting Language

Use this function to change the language of the menu screens.

The first time that you switch on your TV, the Language menu appears automatically.

However, if you need to change the language menu afterwards, select the menu LANGUAGE in the

(SET UP) menu

and proceed in the same way as described below.

LANGUAGE

1 Press the on/off button on your TV set to switch on your TV. The

ENGLISH

PУCCKИЙ

БЬЛГAPCKИ

LANGUAGE

first time you press the on/off button on your TV set, the language

БЬЛГAPCKИ

ENGLISH

PУCCKИЙ

menu displays automatically on the TV screen.

Select language:

Select language:

LANGUAGE

2 Press the or button on the remote control to select the

ENGLISH

language, then press the OK button to confirm your selection.

PУCCKИЙ

БЬЛГAPCKИ

Select language:

1

2

3

4

5

6

7

8

9

Do you want to start

0

automatic tuning?

YES

MENU

The Auto Tuning menu appears on the TV screen in the selected language.

NO

K

PROGR

RM

887

S

First Time Operation - Basic Presetting

9

Advanced Operation - Advanced Presetting

Skipping Programme positions

You can programme this TV to skip any unwanted programme numbers when they are selected with the PROGR +/-

buttons. To cancel this function afterwards, proceed in the same way as described below by selecting NO instead of YES in

step 6.

PICTURE CONTROL

MODE: PERSONAL

1 Press the MENU button on the remote control to display the menu

CONTRAST

PICTURE CONTROL

BRIGHTNESS

MODE: PERSONAL

CONTRAST

COLOUR

BRIGHTNESS

SHARPNESS

COLOUR

on the TV screen.

SHARPNESS

RESET

HUE

HUE

RESET

SET UP

2 Press the button to select the symbol, then press the button

PICTURE ROTATION:

0

LANGUAGE: ENGLISH

to enter to the SET UP menu.

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

1

2

3

4

5

6

SET UP

3 Press the button to select MANUAL PROGRAMME, then press

PICTURE ROTATION:

0

7

8

9

LANGUAGE: ENGLISH

AUTO PROGRAMME

the

button.

PROGRAMME SORTING

MANUAL PROGRAMME

0

MENU

SET UP:

MANUAL PROGRAMME

4 With the cursor highlighting PROGRAMME, press the PROGR

PROGRAMME:

01

SYSTEM:

B/G

K

or button until the programme you want to skip appears on the

CHANNEL:

C 21

AFT:

ON

screen.

SKIP:

NO

CONFIRM

SET UP:

MANUAL PROGRAMME

PROGR

5 Press the button to select SKIP, then press the button.

PROGRAMME:

05

SYSTEM:

B/G

CHANNEL:

C 21

AFT:

ON

SKIP:

NO

CONFIRM

SET UP:

RM

887

MANUAL PROGRAMME

6 Press the button to select YES, then press the OK button.

PROGRAMME:

05

SYSTEM:

B/G

CHANNEL:

C 21

AFT:

ON

SKIP:

YES

CONFIRM

S

SET UP:

7 With the cursor highlighting CONFIRM, press the OK button.

MANUAL PROGRAMME

PROGRAMME:

05

SYSTEM:

B/G

CHANNEL:

C 21

AFT:

ON

SKIP:

YES

CONFIRM

8 Repeat steps 4 to 7 to skip other unused programme positions.

9 Press the MENU button to exit and return to the normal TV screen.

When changing channels (TV Broadcasts) with the PROGR +/- buttons,

the skipped programme positions do not appear. You can, however, still

select them using the number buttons.

16

Advanced Operation - Advanced Presetting

Advanced Operation - Advanced TV Operation

Adjusting the Picture

Although the picture is adjusted at the factory, you can modify it to suit your own taste.

PICTURE CONTROL

MODE: PERSONAL

1 Press the MENU button on the remote control to display the menu

CONTRAST

PICTURE CONTROL

BRIGHTNESS

MODE: PERSONAL

CONTRAST

COLOUR

COLOUR

BRIGHTNESS

SHARPNESS

SHARPNESS

on the TV screen.

RESET

HUE

HUE

RESET

PICTURE CONTROL

2 Press the button to enter to the PICTURE CONTROL menu.

MODE: PERSONAL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

1

2

3

RESET

4

5

6

PICTURE CONTROL

3 Press the or button to select the item you wish to change.

MODE: PERSONAL

CONTRAST

7

8

9

BRIGHTNESS

COLOUR

SHARPNESS

HUE

0

RESET

MENU

PICTURE CONTROL

4 With the cursor highlighting the item you wish to change, press the

MODE: PERSONAL

CONTRAST

button.

BRIGHTNESS

K

COLOUR

(Refer to the table below for the effect of each control).

SHARPNESS

HUE

RESET

PICTURE CONTROL OPERATION / EFFECT

MODE

PERSONAL (for individual settings)

LIVE (for live broadcast programmes)

MOVIE (for films)

PROGR

CONTRAST Less More

BRIGHTNESS* Darker Brighter

COLOUR* Less More

SHARPNESS* Softer Sharper

HUE** Greenish Reddish

RESET Resets picture to the factory preset levels.

RM

887

* Can be only altered if PERSONAL MODE is selected.

** Only avalaible for NTSC colour signal (e.g: US video tapes).

5 Press the / or / button to alter the selected item, then

S

press the OK button to store the new adjustment.

6 Repeat steps 3 to 5 to alter the other items.

7 Press the MENU button to exit and return to the normal TV screen.

Changing Picture Mode Quickly

1 Press the button on the remote control to directly access the

PICTURE MODE.

PICTURE MODE:

PERSONAL

PICTURE MODE:

PERSONAL

PICTURE MODE:

PICTURE MODE:

LIVE

2 Press the button to select your desired picture mode

(PERSONAL, LIVE or MOVIE).

Advanced Operation - Advanced TV Operation

17

Advanced Operation - Advanced TV Operation

Adjusting the Sound

Although the sound is adjusted at the factory, you can modify it to suit your own taste.

PICTURE CONTROL

MODE: PERSONAL

1 Press the MENU button on the remote control to display the menu

CONTRAST

PICTURE CONTROL

BRIGHTNESS

MODE: PERSONAL

COLOUR

BRIGHTNESS

CONTRAST

COLOUR

SHARPNESS

SHARPNESS

on the TV screen.

HUE

RESET

HUE

RESET

SOUND CONTROL

2 Press the button to select the symbol, then press the button

MODE: PERSONAL

TREBLE

to enter to the SOUND CONTROL menu.

BASS

BALANCE

DUAL SOUND:

STEREO

DSP:

ON

1

2

3

RESET

3 Press the or button to select the item you wish to change.

4

5

6

SOUND CONTROL

MODE: PERSONAL

TREBLE

7

8

9

BASS

BALANCE

4 With the cursor highlighting the item you wish to change, press the

DUAL SOUND:

STEREO

DSP:

ON

0

button.

RESET

(Refer to the table below for the effect of each control).

MENU

SOUND CONTROL OPERATION / EFFECT

SOUND CONTROL

MODE

PERSONAL (for individual settings)

MODE: PERSONAL

TREBLE

JAZZ

BASS

BALANCE

POP

K

DUAL SOUND:

STEREO

DSP:

ON

ROCK

RESET

TREBLE* Less More

BASS* Less More

BALANCE Left Right

DUAL SOUND • For a stereo broadcast:

PROGR

MONO

STEREO

• For a bilingual broadcast:

A (for channel 1 or Mono sound)

B (for channel 2)

DSP (Digital sound Processor) ON OFF

RESET Resets sound to the factory preset levels.

RM

887

Can be only altered if PERSONAL MODE is selected.

*

5 Press the / or / button to alter the selected item, then

press the OK button to store the new adjustment.

S

6 Repeat steps 3 to 5 to alter the other items.

7 Press the MENU button to exit and return to the normal TV screen.

Changing Sound Mode Quickly

1 Press the button on the remote control to access directly to the

SOUND MODE.

SOUND MODE:

PERSONAL

SOUND MODE:

PERSONAL

SOUND MODE:

POP

2 Press the button to select your desired sound mode

(PERSONAL, JAZZ, POP or ROCK).

18

Advanced Operation - Advanced TV Operation

Advanced Operation - Advanced TV Operation

Using the Sleep Timer

You can select a time period for the TV to switch itself automatically into the standby mode.

PICTURE CONTROL

MODE: PERSONAL

1 Press the MENU button on the remote control to display the menu

CONTRAST

PICTURE CONTROL

BRIGHTNESS

MODE: PERSONAL

CONTRAST

COLOUR

BRIGHTNESS

COLOUR

on the TV screen.

SHARPNESS

SHARPNESS

HUE

RESET

HUE

RESET

TIMER

2 Press the button to select the symbol, then press the button

OFF TIMER:

OFF

ON TIMER:

OFF

to enter to the TIMER menu.

1

2

3

4

5

6

7

8

9

TIMER

3 With the cursor highlighting OFF TIMER, press the button.

OFF TIMER:

OFF

ON TIMER:

OFF

0

MENU

K

TIMER

4 Press the or button to set the time period delay

OFF TIMER:

0:15

ON TIMER:

OFF

OFF

0:15 min.

0:30 min.

...

...

PROGR

4:00 hours

5 Press the OK button.

RM

887

6 Press the MENU button to exit and return to the normal TV screen.

S

One minute before the TV switches into standby mode, the time remaining

is displayed on the TV screen automatically.

Notes: • When watching the TV, press the

button to display the

time remaining.

• To return to normal operation from standby mode,

press the

button.

Advanced Operation - Advanced TV Operation

19

Advanced Operation - Advanced TV Operation

Using the Wake Up Timer

You can select a time period for the TV to switch itself automatically on from standby mode.

PICTURE CONTROL

MODE: PERSONAL

1 Press the MENU button on the remote control to display the menu

CONTRAST

PICTURE CONTROL

BRIGHTNESS

MODE: PERSONAL

CONTRAST

COLOUR

COLOUR

BRIGHTNESS

on the TV screen.

SHARPNESS

SHARPNESS

RESET

HUE

HUE

RESET

TIMER

2 Press the button to select the symbol, then press the button

OFF TIMER:

OFF

ON TIMER:

OFF

1

2

3

to enter to the TIMER menu.

4

5

6

7

8

9

TIMER

3 Press the button to select ON TIMER, then press the button.

OFF TIMER:

OFF

ON TIMER:

OFF

0

MENU

K

TIMER

4 Press the or button to set the time period

OFF TIMER:

OFF

ON TIMER:

10:30

OFF

0:15 min.

0:30 min.

...

PROGR

...

12:00 hours

5 Press the OK button.

RM

887

6 Press the MENU button to exit and return to the normal TV screen.

S

7 Press the standby button .

The standby indicator on the TV flashes regularly to indicate that the

Wake Up timer is active. After the selected length of time, the TV switches

on automatically.

Notes: • If you use the "Wake Up Timer" to switch the TV on and

keep it on for one hour without pressing any TV or remote

control button, the TV switches itself back into Standby

mode and the indicator

on the TV lights.

• Any temporary power failure causes a misfunction in the

"Wake Up Timer" and you will have to reset the "Wake Up

timer".

20

Advanced Operation - Advanced TV Operation

Teletext

Viewing Teletext

Teletext is an information service transmitted by most TV stations.

Make sure to use a TV channel with a strong signal, otherwise teletext errors may occur.

Selecting Teletext

1 Select the TV channel which carries the teletext service you wish to

view.

2 Press the button on the remote control to switch on the teletext.

1

2

3

TELETEXT

Index

TELETEXT

Index

Programme

25

Programme

News

25

Sport

101

153

News

153

Weather

98

4

5

6

Sport

101

Weather

98

7

8

9

3 Input three digits for the page number, using the numbered buttons

0

on the remote control. (if you have made a mistake, type in any

MENU

three digits and then, re-enter the correct page number).

4 Press the button to switch off teletext.

K

Using other Teletext functions

PROGR

TO PRESS THE BUTTON

Access the next or preceding page

for next page or

for the preceding page

TELETEXT

Index

RM

887

Superimpose teletext on to the TV

Programme

25

News

153

Sport

101

Press again to cancel teletext

Weather

98

mode.

TELETEXT

Index

Programme

25

News

S

Freeze a teletext page

153

Sport

101

Weather

98

Press again to cancel the

freeze.

Reveal concealed information

(e.g: answer to a quiz) Press again to cancel.

Using Fastext

Fastext lets you access pages with one button stroke.

When Fastext is broadcast, a colour coded menu appears at the

bottom of the teletext page. Press the colour button (red, green,

yellow or blue) on the remote control to access the corresponding

page.

Teletext

21

Optional Connections

Using Optional Equipment

You can connect optional audio or video equipment to your TV, such as a VCR, a camcorder or a video game as shown

below.

Front of TV

Select and View the Input Signal

1

Connect your equipment to the designated TV socket.

2 Press

the

button repeatedly on your remote control until the correct

input symbol appears on the TV screen.

Symbol Input signals

k • Audio/video input signal through the Euro AV

connector

E

• RGB input signal through the Euro AV

connector

E

8mm/Hi8

K

• Audio/video input signal through the Euro AV

camcorder

connector

D

q

2

• S video input signal through the Euro AV

connector

D

K

3

• Video input signal through the phono socket

A

and

Audio input signal through

B

3 Switch on the connected equipment.

A

B

C

4 To return to normal TV picture, press the

button on the remote control.

Rear of TV

Additional Information

Connecting a VCR

Plug in VCR to the socket

E

on the rear of the TV set.

We recommend you tune in the VCR signal to TV programme number ‘0’ using

the section “Manually Tuning the TV“ of this instruction manual.

Connecting Headphones

D E

F

Plug in your headphones to the socket

C

on the front of the TV set.

Connecting Decoders

Plug in decoders to the socket

E

on the rear of the TV.

Connecting to External Audio Equipment

Plug in your Hi-Fi equipment to the

F

sockets on the rear of the TV if you wish

to amplify the audio output from the TV.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select

K

input signal using the instructions above. Finally, refer to the “Adjusting the

1

2

Sound” section of this manual and select “A” on the sound menu screen.

“PlayStation”

*

* “PlayStation” is a product of Sony Computer Entertainment, Inc.

Hi-Fi

* “PlayStation” is a trademark of Sony Computer Entertainment, Inc.

VCR

Decoder

22

Optional Connections

Smartlink

Smartlink is a direct link between your TV set and a VCR.

For Smartlink you need:

Rear of TV

• A VCR which supports Smartlink, NextView Link, Easy Link or

Megalogic.

Megalogic is a trademark of Grundig Corporation.

EasyLink is a trademark of Philips Corporation.

• A fully-wired 21 pin SCART cable to connect your VCR to Scart

:1/

connector.

The features of Smartlink are:

• Tuning information such as the channel overview are downloaded

from the TV set to the VCR.

VCR

• Direct TV recording: While watching TV you need to press just one

button on the VCR to record this programme.

• TV in standby mode: Press the "Play z" button on your VCR to

switch the TV automatically on.

For more information on Smartlink, please refer to the Instruction

Manual of your VCR.

Optional Connections

23

Additional Information

Menu Guide

Set Up Menus (for first time operation)

Do you want to start

Please confirm that

automatic tuning?

antenna is connected

YES

CONFIRM

NO

(For more details, please refer to the chapter "Selecting Language")

On Screen display Menus Guide

(For different adjustments,

please refer to the section

"Adjusting the Picture")

(For different adjustments,

please refer to the section

"Adjusting the Sound" )

(For more details,

please refer to the section

"Using the Sleep Timer")

(For more details,

please refer to the section

"Using the Wake Up Timer")

(For more details,

please refer to the section

"Picture Rotation")

(For more details,

please refer to the section

"Selecting Language")

(For more details, please

refer to the section

"Automatically Tuning the TV

using the Remote Control")

(For more details, please

refer to the section

"Changing the Programme

Order of the TV channels")

(For more details,

please refer to the section

"Manually Tuning the TV")

24

Additional Information

LANGUAGE

ENGLISH

PУCCKИЙ

PROGRAMME SORTING

БЬЛГAPCKИ

PROGRAMME:

01

03

CONFIRM

Select Channel:

PROGR

Select new position:

Confirm:

Exit:

MENU

Select language:

PICTURE CONTROL

PICTURE CONTROL

MODE: PERSONAL

MODE: PERSONAL

CONTRAST

CONTRAST

BRIGHTNESS

BRIGHTNESS

COLOUR

COLOUR

SHARPNESS

SHARPNESS

HUE

HUE

RESET

RESET

SOUND CONTROL

SOUND CONTROL

MODE: PERSONAL

MODE: PERSONAL

TREBLE

TREBLE

BASS

BASS

BALANCE

BALANCE

DUAL SOUND:

STEREO

DUAL SOUND:

STEREO

DSP:

ON

DSP:

ON

RESET

RESET

TIMER

TIMER

OFF TIMER:

OFF

OFF TIMER:

OFF

ON TIMER:

OFF

ON TIMER:

OFF

TIMER

OFF TIMER:

OFF

ON TIMER:

OFF

TIMER

TIMER

OFF TIMER:

OFF

OFF TIMER:

OFF

ON TIMER:

OFF

ON TIMER:

OFF

SET UP

SET UP

SET UP

PICTURE ROTATION:

0

PICTURE ROTATION:

0

PICTURE ROTATION:

0

LANGUAGE: ENGLISH

LANGUAGE: ENGLISH

LANGUAGE: ENGLISH

AUTO PROGRAMME

AUTO PROGRAMME

AUTO PROGRAMME

PROGRAMME SORTING

PROGRAMME SORTING

PROGRAMME SORTING

MANUAL PROGRAMME

MANUAL PROGRAMME

MANUAL PROGRAMME

SET UP

SET UP

PICTURE ROTATION:

0

PICTURE ROTATION:

0

LANGUAGE: ENGLISH

LANGUAGE:

ENGLISH

AUTO PROGRAMME

AUTO PROGRAMME

PROGRAMME SORTING

PROGRAMME SORTING

MANUAL PROGRAMME

MANUAL PROGRAMME

SET UP

PICTURE ROTATION:

0

LANGUAGE: ENGLISH

Do you want to start

AUTO PROGRAMME

automatic tuning?

PROGRAMME SORTING

MANUAL PROGRAMME

YES

NO

SET UP

SET UP:

PICTURE ROTATION:

0

PROGRAMME SORTING

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME:

01

03

PROGRAMME SORTING

CONFIRM

MANUAL PROGRAMME

Select channel:

PROGR

Select new position:

SET UP

SET UP:

PICTURE ROTATION:

0

MANUAL PROGRAMME

LANGUAGE: ENGLISH

PROGRAMME:

01

AUTO PROGRAMME

SYSTEM:

B/G

PROGRAMME SORTING

CHANNEL:

C 21

MANUAL PROGRAMME

AFT:

ON

SKIP:

NO

CONFIRM

Additional Information

Troubleshooting

Here are some simple solutions to the problems which may affect the picture and sound.

Problem Solution

No picture (screen is dark), no sound • Plug the TV in.

• Press the

button on the front of TV.

• If the

indicator

is on, press

button or a

programme number

button on the remote control.

• Check the aerial connection.

• Check that the selected video source is on.

• Turn the TV off for 3 or 4 seconds and then turn it

on again using the

button on the front of the TV.

Poor or no picture (screen is dark), • Using the MENU system, select the Picture Adjustment

but good sound display.

Adjust the brightness, picture and colour balance levels.

• From the Picture Adjustment display select RESET to return

to the factory settings.

Poor picture quality when watching a • Press the button repeatedly on the remote control until

RGB video source. the RGB symbol

is displayed on the screen.

Good picture, no sound • Press the +/– button on the remote control.

• If

is displayed on the screen, press the button on the

remote control.

No colour on colour programmes • Using the MENU system, select the Picture Adjustment

display. Adjust the colour balance.

• From the Picture Adjustment display select RESET to return

to the factory settings.

Distorted picture when changing • Turn off any equipment connected to the 21 pin Euro

programmes or selecting teletext connector on the rear of the TV.

Noisy picture when viewing TV • Adjust Fine Tuning to obtain better picture reception.

channel

Remote control does not function • Replace the batteries.

The standby indicator on the TV • Contact to your nearest Sony service centre.

flashes even though the “Wake Up

Timer” function is not use.

• If you continue to have these problems, have your TV serviced by qualified personnel.

• NEVER open the casing yourself.

Additional Information

25