Sony DSC-TX100V Red: инструкция

Раздел: Видео Аудио Фото Оборудование

Тип: Цифровой Фотоаппарат Более 16 Мпикс

Характеристики, спецификации

Серия:
CYBER-SHOT
Тип матрицы:
EXMOR R CMOS
Разрешение матрицы:
16.8 МПикс
Размер матрицы:
1/2.3"
Макс. разрешение:
4608х3456 Пикс
Используемая оптика:
Carl Zeiss Vario-Tessar
Фокусное расстояние:
4.43 - 17.7 мм
Светосила:
F:3.5 - 4.6
Минимальная дистанция съемки:
от 1 см
Оптическое увеличение:
4x
Цифровое увеличение:
16x
Тип карты памяти:
MS Pro DUO, MS Pro-HG DUO, SDHC
Алгоритм сжатия JPEG:
Да
Алгоритм сжатия MPEG4:
Да
Алгоритм сжатия H.264:
Да
GPS модуль:
Да
Автоматическая фокусировка:
Да
Дальность действия вспышки:
5.1 м
Панорамная съемка:
Да
Диапазон выдержки:
2 - 1/1600 сек
Диагональ дисплея:
3.5 "
Разрешение ЖК дисплея:
1229760 Пикс
Сенсорный дисплей:
Да
Скорость видеосъемки:
30 кадр/сек
Тип аккумулятора:
Li-Ion
Емкость аккумулятора:
630 мАч
Наим. аккум. в комплекте:
NP-BN1
Материал корпуса:
пластик/ металл
Интерфейс связи с ПК:
USB 2.0
Кабель USB:
в комплекте
Кабель для цифр.подкл. (HDMI):
доп.опция
Карта памяти:
доп.опция
Ремень на запястье:
в комплекте
Зарядное устройство в комплекте:
Да
Кейс:
доп.опция
Цвет:
красный
Габаритные размеры (В*Ш*Г):
58.5*97*17.8 мм
Вес:
130 г
Краткое описание:
16.8 МПикс;4x;Сенсорный дисплей;GPS
Гарантия:
2 года
Страна:
Япония
Вид гарантии:
гарантийный талон
Высота:
58.5 мм
Ширина:
97 мм
Глубина:
17.8 мм
Сегмент:
Стильно и модно
Базовый цвет:
другие цвета

Инструкция к Цифровому Фотоаппарату Более 16 Мпикс Sony DSC-TX100V Red

4-265-633-44(1)

Digital Still Camera / Instruction Manual GB

Цифровой фотоаппарат / Инструкция по эксплуатации

RU

Цифровий фотоапарат / Посібник з експлуатації UA

DSC-TX100/TX100V

English

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the

space provided below. Refer to these numbers whenever you call your Sony dealer

regarding this product.

Model No. DSC-TX100/TX100V

Serial No. ______________________________

Model No. AC-UB10/UB10B

Serial No. ______________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS

DANGER

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, CAREFULLY FOLLOW THESE

INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.

CAUTION

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical

burns. Observe the following cautions.

Do not disassemble.

Do not crush and do not expose the battery pack to any shock or force such as

hammering, dropping or stepping on it.

Do not short circuit and do not allow metal objects to come into contact with the battery

terminals.

Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a

car parked in the sun.

GB

Do not incinerate or dispose of in fire.

2

Do not handle damaged or leaking lithium ion batteries.

Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

Keep the battery pack out of the reach of small children.

Keep the battery pack dry.

Replace only with the same or equivalent type recommended by Sony.

Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Connect the AC Adaptor to the nearest wall outlet (wall socket).

GB

If some trouble occurs while using the AC Adaptor, immediately shut off the power by

disconnecting the plug from the wall outlet (wall socket).

The power cord (mains lead), if supplied, is designed specifically for use with this camera

only, and should not be used with other electrical equipment.

For Customers in the U.S.A. and Canada

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries,

call toll free

1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

For Customers in the U.S.A.

UL is an internationally recognized safety organization.

The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669).

GB

The number below is for the FCC related matters only.

3

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY

Model No.: DSC-TX100V

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

GB

4

For Customers in Europe

Hereby, Sony Corporation, declares that this DSC-TX100V Digital Still Camera is in

compliance with the essential requirements and other relevant provisions of the Directive

GB

1999/5/EC. For details, please access the following URL:

http://www.compliance.sony.de/

[ Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,

108-0075 Japan. The Authorized Representative for EMC and product safety is Sony

Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or

guarantee matters please refer to the addresses given in separate service or guarantee

documents.

This product has been tested and found compliant with the limits set out in the EMC

regulation for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound

of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail),

restart the application or disconnect and connect the communication cable (USB, etc.)

again.

[ Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate

collection systems)

This symbol on the product or on its packaging indicates that this product

shall not be treated as household waste. Instead it shall be handed over to

the applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling

of this product. The recycling of materials will help to conserve natural

resources. For more detailed information about recycling of this product,

please contact your local Civic Office, your household waste disposal service or the shop

where you purchased the product.

GB

5

[ Disposal of waste batteries (applicable in the European Union

and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery

provided with this product shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a

chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are

added if the battery contains more than 0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of correctly, you will help prevent

potentially negative consequences for the environment and human health which could

otherwise be caused by inappropriate waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a

permanent connection with an incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will be treated properly, hand over

the product at end-of-life to the applicable collection point for the recycling of electrical

and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the

product safely.

Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact

your local Civic Office, your household waste disposal service or the shop where you

purchased the product.

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and

convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the

supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or

mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the

fuse cover after you change the fuse. Never use the plug without the fuse cover. If you

should lose the fuse cover, please contact your nearest Sony service station.

GB

6

Refer to “Cyber-shot User Guide” (HTML) on

supplied CD-ROM

For details on advanced operations, please read “Cyber-shot User Guide”

(HTML) on the CD-ROM (supplied) using a computer.

Insert the CD-ROM into the CD-ROM drive.

GB

For Windows users:

1 Click [User Guide] t [Install].

2 Start “User Guide” from the shortcut on the desktop.

For Macintosh users:

1 Select the [User Guide] folder and copy [eng] folder stored in [User Guide]

folder to your computer.

2 After copying is complete, double-click “index.html” in [eng] folder.

Checking the supplied items

Camera (1)

Rechargeable battery pack NP-BN1 (1)

Multi-use terminal USB cable (1)

AC Adaptor AC-UB10/UB10B (1)

Power cord (mains lead) (not supplied in the USA and Canada) (1)

Paint pen (1)

Wrist strap (1)

•CD-ROM (1)

Cyber-shot application software

“Cyber-shot User Guide”

Instruction Manual (this manual) (1)

GB

7

Identifying parts

E Lens

F Self-timer lamp/Smile Shutter

lamp/AF illuminator

G Speaker

H (Playback) button

I Screen/Touch panel

J ON/OFF (Power) button

K Shutter button

L For shooting: W/T (Zoom) lever

M Hook for wrist strap

N Tripod receptacle

Use a tripod with a screw less

than 5.5 mm (7/32 inches) long.

Otherwise, you cannot firmly

secure the camera, and damage to

the camera may occur.

O Battery eject lever

P Battery insertion slot

Q (TransferJet™) mark

R Battery/memory card cover

S Multi connector (Type3b)

T Access lamp

U Memory card slot

V HDMI connector

W Connector cover

A Flash

B Lens cover

C Microphone

D GPS sensor (built-in, DSC-

GB

TX100V only)

8

Inserting the battery pack

Eject lever

GB

Open the cover.

1

Insert the battery pack.

2

While pressing the battery eject lever, insert the battery pack as

illustrated. Make sure that the battery eject lever locks after insertion.

Charging the battery pack

For customers in the USA,

Canada

Power cord

(Mains lead)

Power/Charge lamp

Lit: Charging

For customers in countries/regions

Off: Charging finished

other than the USA and Canada

Flash: Charging error

GB

9

Connect the camera and the AC Adaptor (supplied),

1

using the multi-use terminal USB cable (supplied).

Connect the AC Adaptor to the wall outlet (wall socket).

2

The Power/Charge lamp lights orange, and charging starts.

Turn off the camera while charging the battery.

You can charge the battery pack even when it is partially charged.

When the Power/Charge lamp flashes and charging is not finished,

remove and re-insert the battery pack.

Notes

When the Power/Charge lamp on the camera does not lit even if the AC Adaptor is

connected to the camera and the wall outlet (wall socket), it indicates that the

charging stops temporarily on standby. The charging stops and enters the standby

status automatically when the temperature is outside of the recommended

operating temperature. When the temperature gets back within the appropriate

range, the charging resumes. We recommend charging the battery pack in an

ambient temperature of between 10°C to 30°C (50ºF to 86ºF).

Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If any

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall

outlet (wall socket) immediately to disconnect the power source.

When charging is finished, disconnect the AC Adaptor from the wall outlet (wall

socket).

Be sure to use only genuine Sony brand battery packs, multi-use terminal USB

cable (supplied) and AC Adaptor (supplied).

GB

10

x

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using

a multi-use terminal USB cable.

GB

Note

Note the following points when charging via a computer:

If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period

of time.

Do not turn on/off or restart the computer, or wake the computer resume from

sleep mode when a USB connection has been established between the computer

and the camera. The camera may cause a malfunction. Before turning on/off, or

restarting the computer or waking the computer from sleep mode, disconnect the

camera and the computer.

No guarantees are made for charging using a custom-built computer or a

modified computer.

x

Charging time

The charging time is approximately 210 min. using the AC Adaptor

(supplied).

Note

The above charging time applies when charging a fully depleted battery pack at a

temperature of 25°C (77°F). Charging may take longer depending on conditions of

use and circumstances.

GB

11

x

Battery life and number of still images you can record

and view

Battery life Number of images

Shooting (still images) Approx. 110 min. Approx. 220 images

Viewing (still images) Approx. 160 min. Approx. 3200 images

Shooting (movies) Approx. 55 min.

Notes

The above number of still images applies when the battery pack is fully charged.

The number of still images may decrease depending on the conditions of use.

The number of still images that can be recorded is for shooting under the following

conditions:

Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately)

The battery pack is used at an ambient temperature of 25°C (77°F).

[GPS setting]: [Off] (DSC-TX100V only)

The number for “Shooting (still images)” is based on the CIPA standard, and is for

shooting under the following conditions:

(CIPA: Camera & Imaging Products Association)

[Panel Brightness] is set to [3].

Shooting once every 30 seconds.

The zoom is switched alternately between the W and T ends.

The flash strobes once every two times.

The power turns on and off once every ten times.

The battery life for movies applies shooting under the following conditions:

Movie quality: AVCHD HQ

When continuous shooting ends because of set limits (page 22), touch

(Movie button) again and continue shooting. Shooting functions such as the

zoom do not operate.

GB

12

x

Supplying power

The camera can be supplied with power from the wall outlet (wall socket) by

connecting to the AC Adaptor, using the multi-use terminal USB cable

(supplied).

You can import images to a computer without worrying about wearing down

the battery pack by connecting the camera to a computer using the multi-use

terminal USB cable.

Notes

GB

Power cannot be supplied when the battery pack is not inserted in the camera.

Power supply from the wall outlet (wall socket) is available only when the camera

is in playback mode or when a connection is made between the camera and a

computer. If the camera is in shooting mode or while you are changing the settings

of the camera, power is not supplied even if you make a USB connection using the

multi-use terminal USB cable.

If you connect the camera and a computer using the multi-use terminal USB cable

when the camera is in playback mode, the display on the camera is changed from

the playback screen to the USB connection screen. Press (Playback) button to

switch to the playback screen.

Inserting a memory card (sold separately)

Ensure the notched corner faces

correctly.

Open the cover.

1

Insert the memory card (sold separately).

2

With the notched corner facing as illustrated, insert the memory card

until it clicks into place.

GB

13

Close the cover.

3

Closing the cover with the battery inserted incorrectly may damage the

camera.

x

Memory cards that you can use

Memory card For still images For movies

Memory Stick PRO Duo aa (Mark2 only)

A

Memory Stick PRO-HG Duo aa

Memory Stick Duo a

SD memory card aa (Class 4 or faster)

B

SDHC memory card aa (Class 4 or faster)

SDXC memory card aa (Class 4 or faster)

In this manual, products in A are collectively referred to as “Memory Stick Duo”

media, and products in B are collectively referred to as SD card.

x

To remove the memory card/battery pack

Memory card: Push the memory card in once.

Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

Note

Never remove the memory card/battery pack when the access lamp (page 8) is lit.

This may cause damage to data in the memory card/internal memory.

GB

14

Setting the clock

GB

ON/OFF (Power)

Lens cover

button

Lower the lens cover.

1

The camera is turned on. The power lamp lights up only when the camera

starts up.

You can also turn on the camera by pressing the ON/OFF (Power)

button.

It may take time for the power to turn on and allow operation.

Select a desired language.

2

Select the desired area following the instructions on the

3

screen, then touch [NEXT].

Set [Daylight Savings] or [Summer Time], [Date & Time

4

Format] and [Date & Time], then touch [NEXT].

Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

Touch [OK].

5

Select the desired display color and [GPS setting]

6

(DSC-TX100V), following the instructions on the

screen, then touch [OK].

The battery pack will run out quickly if you set [GPS setting] to [On].

(DSC-TX100V only)

When an [In-Camera Guide] introductory message is

7

GB

appeared on the screen, touch [OK].

15

Shooting still images/movies

Movie button

Shutter button

Shooting still images

Press the shutter button halfway down to focus.

1

When the image is in focus, a beep sounds and the z indicator lights.

Press the shutter button fully down.

2

Shooting movies

Touch (Movie button) to start recording.

1

Use the W/T (zoom) lever to change the zoom scale.

Touch (Movie button) to stop recording.

2

Note

Continuous shooting is possible for approximately 29 minutes at one time at the

camera’s default settings and when the temperature is approximately 25°C (77°F).

When movie recording is finished, you can restart recording by touching

(Movie button) again. Recording may stop to protect the camera depending on the

ambient temperature.

GB

16

Viewing images

GB

(Playback)

Press the (Playback) button.

1

When images on a memory card recorded with other cameras are played

back on this camera, the registration screen for the data file appears.

x

Selecting next/previous image

Touch (Next)/ (Previous) on the screen.

To play back movies, touch (Playback) in the center of the screen.

To zoom in, touch the image being played back.

x

Deleting an image

1 Touch (Delete) t [This Image].

x

Returning to shooting images

Touch .

You can also return to shooting mode by pressing the shutter button halfway

down.

GB

17

In-Camera Guide

This camera contains an internal function guide. This allows you to search the

camera’s functions according to your needs.

Touch (In-Camera Guide).

1

The mark will appear on the bottom right of the screen while viewing.

Select a search method from [In-Camera Guide].

2

Shoot/ playback guide: Search for various operation functions in

shooting/viewing mode.

Icon guide: Search the function and meaning of displayed icons.

Troubleshooting: Search common problems and their solution.

Objective guide: Search functions according to your needs.

Keyword: Search functions by key words.

History: Display the last 10 items displayed in [In-Camera Guide].

GB

18

Introduction of other functions

Other functions used when shooting or playing back can be operated touching

the MENU on the screen. This camera is equipped with a Function Guide that

allows you to easily select from the functions. While displaying the guide, try

the other functions.

GB

x

Menu Items

Shooting

Movie shooting

Select movie recording mode.

scene

Easy Mode Shoot still images using minimal functions.

Movie button Shoot movies from all REC modes quickly.

Flash Sets the flash settings.

Self-Timer Sets the self-timer settings.

Set the level of background defocus effect when

Defocus Effect

shooting in Background Defocus mode.

Still Image Size/

Select the image size and the quality for still images,

Panorama Image

panoramic images or movie files.

Size/Movie Size/

Movie Quality

Burst Settings Sets the burst shooting settings.

Macro Shoots beautiful close-up images of small subjects.

EV Adjust the exposure manually.

ISO Adjust the luminous sensitivity.

White Balance Adjust color tones of an image.

Focus Select the focus method.

GB

19

Select the metering mode that sets which part of the

Metering Mode

subject to measure to determine the exposure.

Scene Recognition Set to automatically detect shooting conditions.

Soft Skin Effect Set the Soft Skin Effect and the effect level.

Set to automatically release the shutter when a smile is

Smile Shutter

detected.

Smile Detection

Set the Smile Shutter function sensitivity for detecting

Sensitivity

smiles.

Select to detect faces and adjust various settings

Face Detection

automatically.

Set to automatically shoot two images and select image

Anti Blink

in which the eyes are not blinking.

Position

Checking the triangulating status.

*

Information

In-Camera Guide Search the camera’s functions according to your needs.

*

DSC-TX100V only

Viewing

Easy Mode Increase the text size on the screen for ease of use.

Date Select Selects the desired image to view by date.

Calendar Selects the date to be played back on Calendar.

Image Index Displays multiple images at the same time.

Slideshow Select a method of continuous playback.

Delete Delete an image.

Send by

Transfer data by closely aligning two products equipped

TransferJet

with TransferJet.

Paint Paints on a still image and saves it as a new file.

Retouch Retouch an image using various effects.

3D Viewing Set to play back images shot in 3D mode on a 3D TV.

View Mode Select the display format for images.

Display Burst

Select to display burst images in groups or display all

Group

images during playback.

GB

20

Protect Protect the images.

Print (DPOF) Add a print order mark to a still image.

Rotate Rotate a still image to the left or right.

Volume Adjusts the volume.

Sets whether or not to display the shooting data (Exif

Exposure data

data) of the currently displayed file on the screen.

GB

Number of images

Sets the number of images displayed in the index screen.

in index

In-Camera Guide Search the camera’s functions according to your needs.

x

Setting items

If you touch the MENU while shooting or during playback, (Settings) is

provided as a final selection. You can change the default settings on the

(Settings) screen.

Movie format/AF Illuminator/Grid Line/Digital Zoom/

Wind Noise Reduct./Scene Recog. Guide/Red Eye

Shooting Settings

Reduction/Blink Alert/Write Date

Beep/Panel Brightness/Language Setting/Display color/

Demo Mode/Initialize/HDMI Resolution/CTRL FOR

HDMI/USB Connect Setting/USB Power Supply/LUN

Main Settings

*1

Setting/Download Music/Empty Music/GPS setting

/

*1

GPS assist data

/TransferJet/Eye-Fi/Power Save

Format/Create REC.Folder/Change REC.Folder/Delete

Memory Card

REC.Folder/Copy/File Number

*2

Tool

*1

Area Setting/Date & Time Setting/Auto Clock ADJ

/

*1

Clock Settings

Auto Area ADJ

*1

DSC-TX100V only

*2

If a memory card is not inserted, (Internal Memory Tool) will be displayed

and only [Format] can be selected.

GB

21

Number of still images and recordable time of

movies

The number of still images and recordable time may vary depending on the

shooting conditions and the memory card.

x

Still images

(Units: Images)

Capacity

Internal memory Memory card

Size

Approx. 19 MB 2 GB

16M 3 335

VGA 98 9600

16:9(12M) 3 355

x

Movies

The table below shows the approximate maximum recording times. These are

the total times for all movie files. Continuous shooting is possible for

approximately 29 minutes. The maximum size of an MP4-format movie file is

up to approximately 2 GB.

(h (hour), m (minute))

Capacity

Internal memory Memory card

Size

Approx. 19 MB 2 GB

AVC HD 28M (PS) 9 m

(9 m)

AVC HD 9M (HQ) 25 m

(15 m)

MP4 12M 20 m

MP4 3M 1 h 10 m

The number in ( ) is the minimum recordable time.

The recordable time of movies varies because the camera is equipped with VBR

(Variable Bit-Rate), which automatically adjusts image quality depending on the

shooting scene. When you record a fast-moving subject, the image is clearer but

the recordable time is shorter because more memory is required for recording.

The recordable time also varies depending on the shooting conditions, the subject

or the image quality/size settings.

GB

22

Notes on using the camera

Functions built into this camera

This manual describes the functions of GPS-compatible/incompatible devices,

TransferJet-compatible/incompatible devices, 1080 60p-compatible devices and

1080 50p-compatible devices.

To determine whether your camera supports the GPS function, check the model

name of your camera.

GB

GPS-compatible: DSC-TX100V

GPS-incompatible: DSC-TX100

To check if your camera supports the TransferJet function, and whether it is a

1080 60i-compatible device or 1080 50i-compatible device, check for the

following marks on the bottom of the camera.

TransferJet-compatible device:

(TransferJet)

1080 60i-compatible device: 60i

1080 50i-compatible device: 50i

This camera is compatible with 1080 60p movie.

Progressive mode increases resolution over standard interlaced recording mode,

resulting in smoother and more realistic images.

In an airplane, make sure to turn off the camera following cabin announcements.

Do not watch 3D images shot with this camera for extended periods of time on

3D-compliant monitors.

When you view 3D images shot with this camera on a 3D-compliant monitors, you

may experience discomfort in the form of eye strain, fatigue, or nausea. To prevent

these symptoms, we recommend that you take regular breaks. However, you need

to determine for yourself the length and frequency of breaks you require, as they

vary according to the individual. If you experience any type of discomfort, stop

viewing the 3D images until you feel better, and consult a physician as necessary.

Also refer to the operating instructions supplied with the device or software you

have connected or are using with this camera. Note that a child's eyesight is still at

the development stage (particularly children below the age of 6).

Consult a pediatrician or ophthalmologist before letting your child view 3D

images, and make sure he/she observes the above precautions when viewing such

images.

On GPS-compatible devices (DSC-TX100V only)

Use GPS in accordance with regulations of countries and regions where you use it.

If you do not record the direction or location information, set [GPS setting] to

[Off].

On use and care

Avoid rough handling, disassembling, modifying, physical shock, or impact such as

hammering, dropping, or stepping on the product. Be particularly careful of the lens.

GB

23

Notes on recording/playback

Before you start recording, make a trial recording to make sure that the camera is

working correctly.

The camera is neither dust-proof, nor splash-proof, nor water-proof.

Avoid exposing the camera to water. If water enters inside the camera, a

malfunction may occur. In some cases, the camera cannot be repaired.

Do not aim the camera at the sun or other bright light. It may cause the

malfunction of the camera.

If moisture condensation occurs, remove it before using the camera.

Do not shake or strike the camera. It may cause a malfunction and you may not be

able to record images. Furthermore, the recording media may become unusable or

image data may be damaged.

Do not use/store the camera in the following places

In an extremely hot, cold or humid place

In places such as in a car parked in the sun, the camera body may become

deformed and this may cause a malfunction.

Under direct sunlight or near a heater

The camera body may become discolored or deformed, and this may cause a

malfunction.

In a location subject to rocking vibration

Near a location that generates strong radio waves, emits radiation or is strongly

magnetic place. Otherwise, the camera may not properly record or play back

images.

In sandy or dusty places

Be careful not to let sand or dust get into the camera. This may cause the camera to

malfunction, and in some cases this malfunction cannot be repaired.

On carrying

Do not sit down in a chair or other place with the camera in the back pocket of your

trousers or skirt, as this may cause malfunction or damage the camera.

Carl Zeiss lens

The camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp

images with excellent contrast. The lens for the camera has been produced under a

quality assurance system certified by Carl Zeiss in accordance with the quality

standards of Carl Zeiss in Germany.

Notes on the screen and lens

The screen is manufactured using extremely high-precision technology so over

99.99% of the pixels are operational for effective use. However, some tiny black

and/or bright dots (white, red, blue or green) may appear on the screen. These dots

are a normal result of the manufacturing process, and do not affect the recording.

The touch panel is less likely to react when gloves are worn.

GB

24

If you continue or repeat to display the same image on the screen for a long period

of time, the image may be burned into the screen permanently. In order to prevent

an image from being burned into the screen, avoid displaying the same image for a

long period of time.

On camera’s temperature

Your camera and battery may get hot due to continuous use, but it is not a

malfunction.

On the overheat protection

GB

Depending on the camera and battery temperature, you may be unable to record

movies or the power may turn off automatically to protect the camera.

A message will be displayed on the screen before the power turns off or you can no

longer record movies. In this case, leave the power off and wait until the camera and

battery temperature goes down. If you turn on the power without letting the camera

and battery cool enough, the power may turn off again or you may be unable to

record movies.

On charging the battery

If you charge a battery that has not been used for a long time, you may be unable to

charge it to the proper capacity.

This is due to the battery characteristics, and is not a malfunction. Charge the battery

again.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted.

Unauthorized recording of such materials may be contrary to the provisions of the

copyright laws.

No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content

due to a malfunction of the camera or recording media, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth slightly moistened with water, then wipe

the surface with a dry cloth. To prevent damage to the finish or casing:

Do not expose the camera to chemical products such as thinner, benzine, alcohol,

disposable cloths, insect repellent, sunscreen or insecticide.

GB

25

Specifications

Camera

Video: MPEG-4 AVC/H.264

Audio: Dolby Digital 2ch,

[System]

equipped with Dolby Digital Stereo

Creator

Image device: 7.77 mm (1/2.3 type)

Manufactured under license from

Exmor R CMOS sensor

Dolby Laboratories.

Total pixel number of camera:

Movies (MP4 view):

Approx. 16.8 Megapixels

MP4 format

Effective pixel number of camera:

Video: MPEG-4 AVC/H.264

Approx. 16.2 Megapixels

Audio: MPEG-4 AAC-LC 2ch

Lens: Carl Zeiss Vario-Tessar 4× zoom

Recording media: Internal Memory

lens

(Approx. 19 MB), “Memory Stick

f = 4.43 mm – 17.7 mm (25 mm

Duo” media, SD cards

100 mm (35 mm film equivalent))

Flash: Flash range (ISO sensitivity

F3.5 (W) – F4.6 (T)

(Recommended Exposure Index)

While shooting movies (16:9):

set to Auto):

27 mm – 108 mm

Approx. 0.08 m to 5.1 m

While shooting movies (4:3):

(3 1/4 inches to 16 feet 8 7/8 inches)

33 mm – 132 mm

(W)

SteadyShot: Optical

Approx. 0.5 m to 4.0 m

Exposure control: Automatic exposure,

(1 feet 7 3/4 inches to 13 feet

Scene Selection (15 modes)

1 1/2 inches) (T)

White balance: Automatic, Daylight,

Cloudy, Fluorescent 1/2/3,

[Input and Output connectors]

Incandescent, Flash, One Push

HDMI connector: HDMI mini jack

Signal format:

Multi connector: Type3b

For 1080 50i: PAL color, CCIR

(AV-out/USB/DC-in):

standards HDTV 1080/50i, 1080/

Video output

50p specification

Audio output (Stereo)

For 1080 60i: NTSC color, EIA

USB communication

standards HDTV 1080/60i, 1080/

USB communication: Hi-Speed USB

60p specification

(USB 2.0)

File format:

Still images: JPEG (DCF Ver. 2.0,

Exif Ver. 2.3, MPF Baseline)

compliant, DPOF compatible

3D still images: MPO (MPF

Extended (Disparity Image))

compliant

Movies (AVCHD view): AVCHD

format Ver.2.0 compatible

GB

26

AC Adaptor AC-UB10/UB10B

[Screen]

Power requirements: AC 100 V to

OLED:

240 V, 50 Hz/60 Hz, 70 mA

Wide (16:9), 8.8cm (3.5 type)

Output voltage: DC 5 V, 0.5 A

Total number of dots:

Operating temperature: 0 °C to 40 °C

1 229 760 dots equivalent

(3F to 10F)

Storage temperature: –20 °C to +60 °C

[Power, general]

(–4 °F to +140 °F)

Power: Rechargeable battery pack

Dimensions:

GB

NP-BN1, 3.6 V

Approx. 50 mm × 22 mm × 54 mm

AC Adaptor AC-UB10/UB10B,

(2 inches × 7/8 inches ×

5V

2 1/4 inches) (W/H/D)

Power consumption (during shooting):

Mass:

1.0 W

For the USA and Canada: Approx.

Operating temperature: 0 °C to 40 °C

48 g (1.7 oz)

(32 °F to 104 °F)

For countries or regions other than

Storage temperature: –20 °C to +60 °C

the USA and Canada: Approx. 43 g

(–4 °F to +140 °F)

(1.5 oz)

Dimensions (CIPA compliant):

97.0 mm × 58.5 mm × 17.8 mm

Rechargeable battery pack

(3 7/8 inches × 2 3/8 inches ×

NP-BN1

23/32 inches) (W/H/D)

Used battery: Lithium-ion battery

Mass (CIPA compliant) (including NP-

Maximum voltage: DC 4.2 V

BN1 battery pack, “Memory Stick

Nominal voltage: DC 3.6 V

Duo” media):

Maximum charge voltage: DC 4.2 V

Approx. 147 g (5.2 oz)

Maximum charge current: 0.9 A

Microphone: Stereo

Capacity:

Speaker: Monaural

typical: 2.3 Wh (630 mAh)

Exif Print: Compatible

minimum: 2.2 Wh (600 mAh)

PRINT Image Matching III:

Compatible

Design and specifications are subject to

change without notice.

GB

27

Trademarks

Additional information on this

The following marks are trademarks

product and answers to frequently

of Sony Corporation.

asked questions can be found at

, “Cyber-shot,”

“Memory Stick PRO Duo,”

our Customer Support Website.

“Memory Stick PRO-HG Duo,”

“Memory Stick Duo”

Windows is registered trademark of

Microsoft Corporation in the United

States and/or other countries.

Macintosh is registered trademark of

Apple Inc..

SDXC logo is a trademark of SD-3C,

LLC.

and “PlayStation” are

registered trademarks of Sony

Computer Entertainment Inc.

In addition, system and product

names used in this manual are, in

general, trademarks or registered

trademarks of their respective

developers or manufacturers.

However, the ™ or ® marks are not

used in all cases in this manual.

Add further enjoyment with your

PlayStation®3 by downloading the

application for PlayStation®3 from

PlayStation®Store (where available.)

The application for PlayStation®3

requires PlayStation®Network

account and application download.

Accessible in areas where the

PlayStation®Store is available.

GB

28

Аннотация для Цифрового Фотоаппарата Более 16 Мпикс Sony DSC-TX100V Red в формате PDF