Sony DSC-WX10: инструкция

4-270-089-42(1)

Digital Still Camera / Instruction Manual GB

Цифровой фотоаппарат / Инструкция по эксплуатации

RU

Цифровий фотоапарат / Посібник з експлуатації UA

DSC-WX10

English

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the

space provided below. Refer to these numbers whenever you call your Sony dealer

regarding this product.

Model No. DSC-WX10

Serial No. ______________________________

Model No. AC-UB10/UB10B

Serial No. ______________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS

DANGER

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, CAREFULLY FOLLOW THESE

INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.

CAUTION

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical

burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as

hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery

terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a

car parked in the sun.

GB

• Do not incinerate or dispose of in fire.

2

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Connect the AC Adaptor to the nearest wall outlet (wall socket).

GB

If some trouble occurs while using the AC Adaptor, immediately shut off the power by

disconnecting the plug from the wall outlet (wall socket).

The power cord (mains lead), if supplied, is designed specifically for use with this camera

only, and should not be used with other electrical equipment.

For Customers in the U.S.A. and Canada

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries,

call toll free

1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

For Customers in the U.S.A.

UL is an internationally recognized safety organization.

The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669).

GB

The number below is for the FCC related matters only.

3

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY

Model No.: DSC-WX10

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

GB

4

For Customers in Europe

[ Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,

108-0075 Japan. The Authorized Representative for EMC and product safety is Sony

Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or

guarantee matters please refer to the addresses given in separate service or guarantee

documents.

GB

This product has been tested and found compliant with the limits set out in the EMC

Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound

of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail),

restart the application or disconnect and connect the communication cable (USB, etc.)

again.

[ Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate

collection systems)

This symbol on the product or on its packaging indicates that this product

shall not be treated as household waste. Instead it shall be handed over to

the applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling

of this product. The recycling of materials will help to conserve natural

resources. For more detailed information about recycling of this product,

please contact your local Civic Office, your household waste disposal service or the shop

where you purchased the product.

GB

5

[ Disposal of waste batteries (applicable in the European Union

and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery

provided with this product shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a

chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are

added if the battery contains more than 0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of correctly, you will help prevent

potentially negative consequences for the environment and human health which could

otherwise be caused by inappropriate waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a

permanent connection with an incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will be treated properly, hand over

the product at end-of-life to the applicable collection point for the recycling of electrical

and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the

product safely.

Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact

your local Civic Office, your household waste disposal service or the shop where you

purchased the product.

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and

convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the

supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or

mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the

fuse cover after you change the fuse. Never use the plug without the fuse cover. If you

should lose the fuse cover, please contact your nearest Sony service station.

GB

6

Refer to “Cyber-shot User Guide” (HTML) on

supplied CD-ROM

For details on advanced operations, please read “Cyber-shot User Guide”

(HTML) on the CD-ROM (supplied) using a computer.

Insert the CD-ROM into the CD-ROM drive.

GB

For Windows users:

1 Click [User Guide] t [Install].

2 Start “User Guide” from the shortcut on the desktop.

For Macintosh users:

1 Select the [User Guide] folder and copy [eng] folder stored in [User Guide]

folder to your computer.

2 After copying is complete, double-click “index.html” in [eng] folder.

Checking the accessories supplied

• Rechargeable battery pack NP-BG1 (1)/Battery case (1)

• Multi-use terminal USB cable (1)

• AC Adaptor AC-UB10/UB10B (1)

• Power cord (mains lead) (not supplied in the USA and Canada) (1)

• Wrist strap (1)

•CD-ROM (1)

– Cyber-shot application software

– “Cyber-shot User Guide”

• Instruction Manual (this manual) (1)

GB

7

Identifying parts

I Speaker

J LCD screen

K (Playback) button

L Mode dial

M MOVIE (Movie) button

N HDMI connector

O Hook for wrist strap

P Control wheel

Q / (In-Camera Guide/Delete)

button

R MENU button

S (TransferJet™) mark

T Battery insertion slot

U Tripod receptacle

• Use a tripod with a screw less

than 5.5 mm (7/32 inches) long.

Otherwise, you cannot firmly

secure the camera, and damage to

the camera may occur.

V Battery eject lever

W Access lamp

X Memory card slot

Y Multi connector (Type3b)

Z Battery/memory card cover

A Shutter button

B For shooting: W/T (Zoom) lever

For viewing: (Playback

zoom) lever/ (Index) lever

C Flash

D ON/OFF (Power) button

E Power/Charge lamp

F Microphone

G Self-timer lamp/Smile Shutter

lamp/AF illuminator

GB

H Lens

8

Inserting the battery pack

GB

Eject lever

Open the cover.

1

Insert the battery pack.

2

• While pressing the battery eject lever, insert the battery pack as

illustrated. Make sure that the battery eject lever locks after insertion.

Charging the battery pack

For customers in the USA

and Canada

Power cord

(Mains lead)

Power/Charge lamp

Lit: Charging

Off: Charging finished

For customers in countries/regions

Flash: Charging error

other than the USA and Canada

GB

9

Shooting still images/movies

Shutter button

MOVIE

W: zoom out

Mode dial

T: zoom in

: Intelligent Auto

: Movie Mode

Shooting still images

Press the shutter button halfway down to focus.

1

When the image is in focus, a beep sounds and the z indicator lights.

Press the shutter button fully down.

2

Shooting movies

Press the MOVIE (Movie) button to start recording.

1

• Use the W/T (zoom) lever to change the zoom scale.

Press the MOVIE button again to stop recording.

2

Notes

• The sound of the lens and lever operating will be recorded when the zoom function

operates while shooting a movie. The sound of the MOVIE button operating may

also be recorded when movie recording is finished.

• Continuous shooting is possible for approximately 29 minutes at one time at the

camera’s default settings and when the temperature is approximately 25°C (77°F).

When movie recording is finished, you can restart recording by pressing the

MOVIE button again. Recording may stop to protect the camera depending on the

ambient temperature.

GB

16

Viewing images

W: zoom out

T: zoom in

Control wheel

GB

(Playback)

/ (Delete)

Select images: B (next)/b (previous) or turn

the control wheel

Set: z

Press the (Playback) button.

1

• When images on a memory card recorded with other cameras are played

back on this camera, the registration screen for the data file appears.

x

Selecting next/previous image

Select an image by pressing B (next)/b (previous) on the control wheel or by

turning the control wheel. Press z in the center of the control wheel to view

movies.

x

Deleting an image

1 Press / (Delete) button.

2 Select [This Image] with v on the control wheel, then press z.

x

Returning to shooting images

Press the shutter button halfway down.

GB

17

In-Camera Guide

This camera contains an internal function guide. This allows you to search the

camera’s functions according to your needs.

/ (In-Camera Guide)

Press the / (In-Camera Guide) button.

1

• When viewing images, [Delete/In-Camera Guide] is displayed. Select

[In-Camera Guide].

Select a search method from [In-Camera Guide].

2

Shoot/ playback guide: Search for various operation functions in

shooting/viewing mode.

Icon guide: Search the function and meaning of displayed icons.

Troubleshooting: Search common problems and their solution.

Objective guide: Search functions according to your needs.

Keyword: Search functions by key words.

History: Display the last 12 items displayed in [In-Camera Guide].

GB

18

Introduction of other functions

Other functions used when shooting or playing back can be operated using the

control wheel or MENU button on the camera. This camera is equipped with a

Function Guide that allows you to easily select from the functions. While

displaying the guide, try the other functions.

Control wheel

GB

MENU

Function Guide

x

Control wheel

DISP (Display Setting): Allows you to change the screen display.

(Self-Timer): Allows you to use the self-timer.

(Burst Settings): Allows you to use the burst shooting mode.

(Flash): Allows you to select a flash mode for still images.

x

Menu Items

Shooting

Movie shooting

Select movie recording mode.

scene

3D Shooting Select the 3D image shooting mode.

Scene Selection Select pre-set settings to match various scene conditions.

Easy Mode Shoot still images using minimal functions.

Set the level of background defocus effect when

Defocus Effect

shooting in Background Defocus mode.

Still Image Size/

Select the image size and the quality for still images,

Panorama Image

panoramic images or movie files.

Size/Movie Size/

Movie Quality

GB

EV Adjust the exposure manually.

19

ISO Adjust the luminous sensitivity.

White Balance Adjust color tones of an image.

White Balance

Adjust color tones according to the adjusted value set

Shift

based on the selected White Balance tone.

Focus Select the focus method.

Select the metering mode that sets which part of the

Metering Mode

subject to measure to determine the exposure.

Burst Shooting

Select the number of images taken per second for Burst

Interval

shooting.

Bracket Setting Set the type of the bracket shooting.

Scene Recognition Set to automatically detect shooting conditions.

Soft Skin Effect Set the Soft Skin Effect and the effect level.

Set to the camera automatically release the shutter when

Smile Shutter

a smile is detected.

Smile Detection

Set the Smile Shutter function sensitivity for detecting

Sensitivity

smiles.

Select to detect faces and adjust various settings

Face Detection

automatically.

Select the vividness of the image, accompanied by

Color Mode

effects.

Color Saturation Adjust the vividness of the image.

Contrast Adjust the contrast of the image.

Sharpness Adjust the sharpness of the image.

Set to automatically shoot two images and select image

Anti Blink

in which the eyes are not blinking.

Movie SteadyShot Set the strength of SteadyShot in Movie Mode.

In-Camera Guide Search the camera’s functions according to your needs.

Viewing

Slideshow Select a method of continuous playback.

3D Viewing Set to play back images shot in 3D mode on a 3D TV.

GB

Send by

Transfer data by closely aligning two products equipped

TransferJet

with TransferJet.

20