Главная > Автомагнитолы > Sony > CDX-2500R

Sony CDX-2500R: инструкция

Раздел: Авто, мото оборудование и транспорт

Тип: Автомагнитола

Инструкция к Автомагнитоле Sony CDX-2500R

Get ting Started

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

Resetting the unit

Attaching the front panel

Before operating the unit for the first time or

Attach part a of the front panel to part b of

after replacing the car battery, you must reset

the unit as illustrated and push until it clicks.

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Reset button

Notes

• Pressing the reset button will erase the clock

setting and some memorised functions.

Notes

• When you connect the power supply cord to the

• Be sure not to attach the front panel upside

unit or reset the unit, wait for about 10 seconds

down.

before you insert a disc. If you insert a disc within

• Do not press the front panel too hard against the

these 10 seconds, the unit will not be reset, and

unit when attaching it.

you will have to press the reset button again.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

Detaching t he front panel

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

You can detach the front panel of this unit to

temperature.

protect the unit from being stolen.

Caution alarm

If you turn the ignition key switch to the OFF

1 Press (OFF).

position without removing the front panel, the

caution alarm will beep for a few seconds.

2 Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

(OFF)

(RELEASE)

2 Press (SHIFT).

Sett ing the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

The clock starts.

1 Press (SHIFT), then press (2) (SET UP)

repeatedly until “CLOCK” appears.

3 Press (SHIFT).

After the clock setting is complete, the

display returns to normal playback mode.

1 Press (4) (n).

The hour indication flashes.

2 Set the hour.

to go backward

SOURCE

to go forward

3 Press (4) (n).

The minute indication flashes.

4 Set the minute.

to go backward

SOURCE

to go forward

Changing the display item

Each time you press (DSPL) during CD

playback, the item changes as follows:

CD Player

Track number/Elapsed playing time ˜ Clock

After you select the desired item, the display

Listening to a CD

will automatically change to the Motion

Display mode after a few seconds.

Insert a CD.

In the Motion Display mode, all the above

Playback starts automatically.

items are scrolled in the display one by one in

Labelled side up

order.

Tip

The Motion Display mode can be turned off. (See

” Changing the sound and display settings” on

page 18).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

If a CD is already inserted, press (SOURCE)

control up or down and release for each

repeatedly until “CD” appears to start

track you want to skip.

playback.

SEEK/AMS

CD indication

Elapsed playing time

To locate succeeding tracks

To locate preceding tracks

Track number

Locating a specific point in a track

— Manual Search

Note

To play an 8 cm CD, use the optional Sony compact

During playback, push the SEEK/AMS

disc single adapter (CSA-8).

control up or down and hold. Release

when you have found the desired point.

To Press

SEEK/AMS

To search forward

Stop playback 6 or (OFF)

Eject the CD 6

To search backward

Note

If “

” or “ ” appears in the

display, that means you have reached the

beginning or the end of the disc and you cannot

go any further.

Playing a CD in various

Radio

modes

You can play CDs in various modes:

•REP (Repeat Play) repeats the current track.

•SHUF (Shuffle Play) plays all the tracks in

Memorising stat ions

random order.

automatically

Playing tracks repeatedly

— Best Tuning Memory (BTM)

— Repeat Play

The unit selects the stations with the strongest

1 During playback, press (SHIFT).

signals and memorises them in the order of

Every time you press (SHIFT), only the

their frequencies. You can store up to 10

items you can select light up.

stations on each band (FM1, FM2, MW, and

DSPL

LW).

SHIFT

Caution

OFF

2 3 4 5 6 7 81

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

2 Press (6) (REP) repeatedly until ”REP-1“

1 Press (SOURCE) repeatedly to select the

appears.

tuner.

Each time you press (SOURCE), the source

changes as follows:

z TUNER z CD

Repeat Play starts.

2 Press (MODE) repeatedly to select the

3 Press (SHIFT).

band.

Each time you press (MODE), the band

To return to normal playback mode, select

changes as follows:

“REP-OFF” in step 2 above.

z FM1 z FM2 z MW z LW

Playing tracks in random order

— Shuffle Play

3 Press (SHIFT), then press (3) (PLAY

1 During playback, press (SHIFT).

MODE) repeatedly until “B.T.M” appears.

2 Press (7) (SHUF) repeatedly until ”SHUF-

4 Press (4) (n).

1“ appears.

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

5 Press (SHIFT).

Shuffle Play starts.

3 Press (SHIFT).

To return to normal playback mode, select

“SHUF-OFF” in step 2 above.

Notes

• The unit does not store stations with weak

Receiving t he memorised

signals. If only a few stations can be received,

some number buttons will retain their former

st at ions

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

1 Press (SOURCE) repeatedly to select the

displayed.

tuner.

• If a CD is not in the unit, only the tuner band

appears even if you press (SOURCE).

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (10)) on

Memorising only t he

which the desired station is stored.

desired st at ions

If you cannot tune in a preset

You can preset up to 20 FM stations (10 each

station

for FM1 and 2), up to 10 MW stations, and up

to 10 LW stations in the order of your choice.

Push and release the SEEK/AMS control

up or down to search for the station

(automatic tuning).

1 Press (SOURCE) repeatedly to select the

Scanning stops when the unit receives a

tuner.

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

2 Press (MODE) repeatedly to select the

received.

band.

Note

If the automatic tuning stops too frequently, press

3 Push the SEEK/AMS control up or down

(SHIFT), then press (3) (PLAY MODE) repeatedly

to tune in the station that you want to

until “ LOCAL” (local seek mode) is displayed. Then

store on the number button.

press (4) (n) to select “ LOCAL-ON.” Press (SHIFT).

Only the stations with relatively strong signals will

be tuned in.

4 Press and hold the desired number

button ((1) to (10)) until “MEM”

Tip

appears.

If you know the frequency of the station you want

The number button indication appears in

to listen to, push the SEEK/AMS control up or

the display.

down and hold until the desired frequency

appears (manual tuning).

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

If FM stereo reception is poor

— Monaural Mode

RDS

1 During radio reception, press (SHIFT),

then press (3) (PLAY MODE) repeatedly

until “MONO” appears.

2 Press (4) (n) repeatedly until “MONO-

Overview of the RDS

ON“ appears.

The sound improves, but becomes

funct ion

monaural (“ST” disappears).

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

3 Press (SHIFT).

additional digital information along with the

regular radio programme signal. Your car

To return to normal playback mode, select

stereo offers you a variety of services. Here are

“MONO-OFF” in step 2 above.

just a few: retuning the same programme

automatically, listening to traffic

Changing the display item

announcements, and locating a station by

Each time you press (DSPL), the item changes

programme type.

as follows:

Notes

• Depending on the country or region, not all of

Frequency ˜ Clock

the RDS functions are available.

• RDS may not work properly if the signal strength

After you select the desired item, the display

is weak or if the station you are tuned to is not

will automatically change to the Motion

transmitting RDS data.

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Displaying the station

Tip

The Motion Display mode can be turned off. (See

name

” Changing the sound and display settings” on

page 18).

The name of the current station lights up in the

display.

Select an FM station (page 8).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “ *” indication means that an RDS station is

being received.

Note

Changing the displayed item

When there is no alternative station in the area

Each time you press (DSPL), the item changes

and you do not need to search for an alternative

as follows:

station, turn the AF function off by pressing

Frequency (Station Name) ˜ Clock

(AF/TA) repeatedly until “ AF TA-OFF” appears.

After you select the desired item, the display

Changing the displayed item

will automatically change to the Motion

Each time you press (AF/TA), the item changes

Display mode after a few seconds.

as follows:

In the Motion Display mode, all the above

” TA-ON ” AF TA-ON*

items are scrolled in the display one by one in

order.

AF-ON “ AF TA-OFF “

Tip

* Select this to turn on both the AF and TA

The Motion Display mode can be turned off. (See

functions.

” Changing the sound and display settings” on

page 18).

Notes

• When “ NO AF” and the station name flash

Note

alternately, it means that the unit cannot find an

“ NO NAME” appears if the received station does

alternative station in the network.

not transmit RDS data.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Push

the SEEK/AMS control up or down while the

station name is flashing (within eight seconds).

The unit starts searching for another frequency

Retuning the same

with the same PI (Programme Identification) data

(“ PI SEEK” appears and no sound is heard). If the

programme aut omatically

unit cannot find another frequency, “ NO PI”

— Alternative Frequencies (AF)

appears, and the unit returns to the previously

selected frequency.

The Alternative Frequencies (AF) function

automatically selects and retunes the station

continue to next page n

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

Frequencies change automatically.

96.0MHz

98.5MHz

102.5MHz

Station

1 Select an FM station (page 8).

2 Press (AF/TA) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Listening to a regional programme

The “REG-ON” (regional on) function lets you

Listening to traffic

stay tuned to a regional programme without

being switched to another regional station.

announcement s

(Note that you must turn the AF function on.)

The Traffic Announcement (TA) and Traffic

The unit is factory preset to “REG-ON,” but if

Programme (TP) data let you automatically

you want to turn off the function, do the

tune in an FM station that is broadcasting

following.

traffic announcements even if you are listening

to other programme sources.

1 During radio reception, press (SHIFT),

then press (3) (PLAY MODE) repeatedly

Press (AF/TA) repeatedly until “TA-ON”

until “REG” appears.

or “AF TA-ON” appears.

The unit starts searching for traffic

2 Press (4) (n) repeatedly until “REG-OFF”

information stations. “TP” appears in the

appears.

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

3 Press (SHIFT).

“TA” flashes. The flashing stops when the

Note that selecting “REG-OFF” might cause

traffic announcement is over.

the unit to switch to another regional

station within the same network.

Tip

If the traffic announcement starts while you are

To return to regional on, select “REG-ON” in

listening to another programme source, the unit

step 2 above.

automatically switches to the announcement and

goes back to the original source when the

Note

announcement is over.

This function does not work in the United

Kingdom and in some other areas.

Notes

• “NO TP” flashes for five seconds if the received

Local link function

station does not broadcast traffic

announcements. Then, the unit starts searching

(United Kingdom only)

for a station that broadcasts it.

The Local Link function lets you select other

• When “EON” appears with “ TP” in the display,

local stations in the area, even if they are not

the current station makes use of broadcast traffic

stored on your number buttons.

announcement of other stations in the same

network.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

To cancel the current traffic

announcement

Presett ing the RDS

Press (AF/TA) or (SOURCE).

st at ions w ith the AF and

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until

TA data

“AF TA-OFF” appears.

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

Presetting the volume of traffic

you don’t have to turn on the AF or TA

announcements

function every time you tune in the preset

You can preset the volume level of the traffic

station. You can select a different setting (AF,

announcements beforehand so you won’t miss

TA, or both) for individual preset stations, or

the announcement. When a traffic

the same setting for all preset stations.

announcement starts, the volume will be

automatically adjusted to the preset level.

Presetting the same setting for all

preset stations

1 Select the desired volume level.

1 Select an FM band (page 8).

2 Press (AF/TA) for two seconds.

“TA” appears and the setting is stored.

2 Press (AF/TA) repeatedly to select either

“AF-ON”, “TA-ON” or “AF TA-ON” (for

Receiving emergency

both AF and TA functions).

Note that selecting “AF TA-OFF” stores not

announcements

only RDS stations, but also non-RDS

If an emergency announcement comes in while

stations.

you are listening to the radio, the programme

will be automatically switched to it. If you are

listening to a source other than the radio, the

3 Press (SHIFT), then press (3) (PLAY

emergency announcements will be heard if

MODE) repeatedly until “BTM” appears.

you set AF or TA to on. The unit will then

automatically switch to these announcements

4 Press (4) (n) until ”B.T.M” flashes.

no matter which source you are listening to at

the time.

5 Press (SHIFT).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station (page 9).

2 Press (AF/TA) repeatedly to select either

“AF-ON”, “TA-ON” or “AF TA-ON” (for

both AF and TA functions).

3 Press the desired number button until

“MEM” appears.

Repeat from step 1 to preset other stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

1 Press (PTY) during FM reception until

Locating a station by

“PTY” appears.

programme t ype

You can locate the station you want by

selecting one of the programme types shown

The current programme type name appears

below.

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

Programme types Display

not an RDS station, or if the RDS data has

News NEWS

not been received.

Current Affairs AFFAIRS

Information INFO

2 Press (PTY) repeatedly until the desired

Sports SPORT

programme type appears.

The programme types appear in the order

Education EDUCATE

shown in the above table. Note that you

Drama DRAMA

cannot select “NONE” (Not specified) for

Culture CULTURE

searching.

Science SCIENCE

Varied VARIED

Popular Music POP M

Rock Music ROCK M

3 Push the SEEK/AMS control up or down.

Easy Listening EASY M

The unit starts searching for a station

Light Classical LIGHT M

broadcasting the selected programme type.

When the unit finds the programme, the

Classical CLASSICS

programme type appears again for five

Other Music Type OTHER M

seconds.

Weather WEATHER

“NO” and the programme type appear

alternately for five seconds if the unit

Finance FINANCE

cannot find the programme type. It then

Children’s programmes CHILDREN

returns to the previous selected station.

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Not specified NONE

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

Sett ing the clock

Ot her Functions

automatically

The CT (Clock Time) data from the RDS

You can also control this unit with an optional

transmission sets the clock automatically.

rotary commander.

1 During radio reception, press (SHIFT),

then press (2) (SET UP) repeatedly until

“CT” appears.

Labelling the rot ary

commander

Depending on how you mount the rotary

commander, attach the appropriate label as

2 Press (4) (n) repeatedly until “CT-ON”

shown in the illustration below.

appears.

The clock is set.

LIST

3 Press (SHIFT) to return to the normal

MODE

SOUND

display.

To cancel the CT function

Select “CT-OFF” in step 2 above.

Notes

• The CT function may not work even though an

SOUND

RDS station is being received.

MODE

• There might be a difference between the time

LIST

set by the CT function and the actual time.

By rotating the control

Using the rotary

(the SEEK/AMS control)

commander

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

(the SOURCE and MODE buttons)

Rotate the control momentarily and

(SOURCE)

release it to:

• Locate a specific track on a disc. Rotate

and hold the control until you locate the

(MODE)

specific point in a track, then release it to

start playback.

• Tune in stations automatically. Rotate and

hold the control to find a specific station.

Each time you press (SOURCE), the

By pushing in and rotating the

source changes as follows:

control (the PRESET/DISC control)

TUNER ˜ CD

Pressing (MODE) changes the operation

in the following ways;

• Tuner: FM1 n FM2 n MW n LW

Push in and rotate the control to:

• Receive the stations memorised on the

number buttons.

Other operations

Rotate the VOL control to

Adjusting the sound

adjust the volume.

characteristics

Press (ATT) to

attenuate the

sound.

You can adjust the bass, treble, balance, and

fader.

OFF

You can store the bass and treble levels

independently for each source.

Press (OFF) to

turn off the

1 Select the item you want to adjust by

unit.

pressing (SOUND) repeatedly.

Press (SOUND) to adjust the

VOL (volume) n BAS (bass) n

volume and sound menu.

TRE (treble) n BAL (left-right) n

FAD (front-rear)

2 Adjust the selected item by rotating the

dial.

Adjust within three seconds after selecting

the item. (After three seconds, the dial

function reverts to volume control.)

Press (LIST) to display the programme

type names (FM tuner only).

Changing the operative direction

Att enuating t he sound

The operative direction of controls is factory-

set as shown below.

Press (ATT) on the optional rotary

To increase

commander.

“ATT-ON” flashes momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

To decrease

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes

If you need to mount the rotary commander on

in (Telephone ATT function).

the right hand side of the steering column, you

can reverse the operative direction.

Press (SOUND) for two seconds while

pushing the VOL control.

Tip

You can also change the operative direction of

these controls with the unit (page 18).

1 Press (SHIFT).

Changing t he sound and

2 Press (2) (SET UP) repeatedly until the

display settings

desired item appears.

The following items can be set:

•CLOCK (page 6).

Each time you press (2) (SET UP), the item

•CT (Clock Time) (page 15).

changes as follows:

•D.INFO (Dual Information) - to display the

CLOCK n CT n D.INFO* n BEEP n RM n

clock and the play mode at the same time

M.DSPL

(ON) or to display the information

* When no CD or MD is playing, this item will

alternately (OFF).

not appear.

• BEEP - to turn on or off the beeps.

• RM (Rotary Commander) - to change the

Note

The displayed item will differ depending on

operative direction of the controls of the

the source.

rotary commander.

— Select “NORM” to use the rotary

commander as the factory-set position.

3 Press (4) (n) to select the desired

— Select “REV” when you mount the rotary

setting (Example: ON or OFF).

commander on the right side of the

steering column.

4 Press (SHIFT).

•M.DSPL (Motion Display) - to turn the

After the mode setting is complete, the

motion display on or off.

display returns to normal playback mode.

Addit ional

Boosting the bass sound

— D-bass

Informat ion

You can enjoy a clear and powerful bass

sound. The D-bass function boosts the low

frequency signal with a sharper curve than

conventional bass boost.

Precautions

You can hear the bass line more clearly even

while the vocal volume remains the same. You

• If your car was parked in direct sunlight

can emphasize and adjust the bass sound

resulting in a considerable rise in

easily with the D-BASS control.

temperature inside the car, allow the unit to

cool off before operating it.

D-BASS 3

D-BASS 2

• If no power is being supplied to the unit,

Level

D-BASS 1

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of

2-speaker systems, set the fader control to the

0dB

Frequency (Hz)

centre position.

• If your car is equipped with a power aerial, it

Adjusting the bass curve

will extend automatically while the unit is

operating.

Turn the D-BASS control to adjust the

bass level (1, 2 or 3).

If you have any questions or problems

“D-BASS” appears in the display.

concerning your unit that are not covered in

this manual, please consult your nearest Sony

To cancel, turn the control to OFF.

dealer.

Note

Notes on handling CDs

If the bass sound becomes distorted, adjust the D-

BASS control or volume.

A dirty or defective disc may cause sound

dropouts while playing. To enjoy optimum

sound, handle the disc by its edge. To keep the

disc clean, do not touch the surface.

Do not stick paper or tape on the labelled

surface.

continue to next page n

Do not expose the discs to direct sunlight or

Notes on moisture condensation

heat sources such as hot air-ducts, or leave

On a rainy day or in a very damp area,

them in a car parked in direct sunlight where

moisture may condense on the lenses inside

there can be a considerable rise in temperature

the CD player. Should this occur, the unit will

inside the car.

not operate properly. In this case, remove the

disc and wait for about an hour until the

moisture evaporates.

When you play 8 cm CDs

Use the optional Sony compact disc single

adapter (CSA-8) to protect the CD player from

damage.

Before playing, clean the discs with an optional

cleaning cloth. Wipe each disc from the centre

out.

Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic

spray intended for analog discs.

Notes on discs

If you use the discs explained below, the sticky

residue can cause the CD to stop spinning and

may cause malfunction or ruin your discs.

Do not use second-hand or rental CDs that

have a sticky residue on the surface (for

example from peeled-off stickers or from ink,

or glue leaking from under the stickers).

There are paste residue

Ink is sticky

Do not use rental CDs with old labels that are

beginning to peel off.

Stickers that are beginning

t o peel aw ay, leaving a

sticky residue

Do not use your CDs with labels or stickers

attached.

Labels are attached

Аннотации для Автомагнитолы Sony CDX-2500R в формате PDF

Топ 10 инструкций

100.00

MB QUART DSG 213

99.98

Skil 0790 RA

99.98

Bosch KGN39VW21

99.97

Sony CDX-CA750X RU

99.97

Braun 310 Series 3

99.96

Asus P3-PE5

99.96

Siemens MQ 5 N 298

99.96

YUKON EXTEND LRS-1000

99.96

Bosch GWS 22-230 JH Professional

99.96

Philips Lunettes 3D Active

К рейтингу инструкций и мануалов →

Другие инструкции

Nokia 9210

Sharp R-757H

Sony CCD-TRV408E

Sony CCD-TRV428E

Sony CDX-3900R

Sony CDX-4000R

Sony CDX-2500R: инструкция

Инструкция к Автомагнитоле Sony CDX-2500R

Оглавление

Welcome !

Table of Content s

Location of controls

Get ting Started

Resetting the unit

Detaching t he front panel

Sett ing the clock

CD Player

Listening to a CD

Playing a CD in various

Radio

modes

Memorising stat ions

automatically

Receiving t he memorised

st at ions

Memorising only t he

desired st at ions

RDS

Overview of the RDS

funct ion

Displaying the station

name

Retuning the same

programme aut omatically

Listening to traffic

announcement s

Presett ing the RDS

st at ions w ith the AF and

TA data

Locating a station by

programme t ype

Sett ing the clock

Ot her Functions

automatically

Labelling the rot ary

commander

Using the rotary

commander

Adjusting the sound

characteristics

Att enuating t he sound

Changing t he sound and

display settings

Addit ional

Boosting the bass sound

Informat ion

Precautions

Аннотации для Автомагнитолы Sony CDX-2500R в формате PDF

Топ 10 инструкций

Другие инструкции