Sony KDL-50W805B: инструкция
Раздел: Бытовая, кухонная техника, электроника и оборудование
Тип: Телевизор
Инструкция к Телевизору Sony KDL-50W805B
Reference Guide
GB
Guide de référence
FR
Guía de referencia
ES
Referentiehandleiding
NL
Television
Referenzleitfaden
DE
Guia de referência
PT
Guida di riferimento
IT
Referensguide
SE
Referencevejledning
DK
Viiteopas
FI
Referanseveiledning
NO
Instrukcja
PL
Referenční příručka
CZ
Referenčná príručka
SK
Referencia útmutató
HU
Ghid de referinţă
RO
Справочно ръководство
BG
Οδηγό Aναφοράς
GR
Başvuru Kılavuzu
TR
Справочное руководство
RU
Довідник
UA
KDL-50W82xB / 50W81xB / 50W80xB / 50W70xB / 42W82xB / 42W81xB /
KDL-42W80xB / 42W70xB / 32W70xB
Introduction
Thank you for choosing this Sony product.
Table of Contents
Before operating the TV, please read this manual thoroughly and
retain it for future reference.
Note
• Before operating the TV, please read “Safety information”
(page 3).
• Instructions about “Installing the TV to the wall” are included
within this TV’s instructions manual.
NOTICE FOR CUSTOMERS IN THE UNITED
• Images and illustrations used in Quick Start Guide and this
KINGDOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
manual are for reference only and may differ from actual
product appearance.
IMPORTANT NOTICE . . . . . . . . . . . . . . . . . . . . 3
Safety information . . . . . . . . . . . . . . . . . . . . . 3
Location of the identification label
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Labels for the TV Model No., Production Date (month/year) and
Power Supply rating are located on the rear of the TV or package.
Installing the TV to the Wall . . . . . . . . . . . 7
Labels for mains adaptor Model No. and Serial No. are located on
Installing the Brackets on the wall . . . . . . . .8
the bottom of mains adaptor.
Preparing for the installation of the TV . . . 11
WARNING
Installing the TV on the wall . . . . . . . . . . . . 12
Troubleshooting. . . . . . . . . . . . . . . . . . . . 14
TO PREVENT THE
Troubles and Solutions . . . . . . . . . . . . . . . . 14
SPREAD OF FIRE, KEEP
Specifications . . . . . . . . . . . . . . . . . . . . . . 15
CANDLES OR OTHER OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
NOTICE FOR CUSTOMERS IN THE UNITED
KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug supplied need to be replaced with the
same rating of fuse approved by ASTA or BSI to BS 1362 (i.e.,
marked with
or ) must be used.
If the plug supplied with this equipment has a detachable fuse
cover, be sure to attach the fuse cover after you change the fuse.
Never use the plug without the fuse cover. If you should lose the
fuse cover, please contact your nearest Sony service station.
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and
replace the fuse.
Please refer to the illustration that actually equipped with the
product.
GB
2
FUSE
Transporting
IMPORTANT NOTICE
• Before transporting the TV set, disconnect all cables.
GB
• Two or three people are needed to transport a large TV set.
This product has been manufactured by or on behalf of Sony
• When transporting the TV set by hand, hold it as shown below.
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan.
Do not put stress on the LCD panel and the frame around the
Inquiries related to product compliance based on European
screen.
Union legislation shall be addressed to the authorized
representative, Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany. For any service or guarantee
matters, please refer to the addresses provided in the separate
service or guarantee documents.
Notice for Wireless Signal
Hereby, Sony Corporation declares that
this unit is in compliance with the
• When transporting the TV set, do not subject it to jolts or
essential requirements and other relevant
excessive vibration.
provisions of Directive 1999/5/EC.
• When transporting the TV set for repairs or when moving, pack
For details, please access the following URL:
it using the original carton and packing material.
http://www.compliance.sony.de/
Topple prevention
Notice for customers: the following information is only applicable
to equipment sold in countries applying EU directives.
• Before install the machine screw, lay the display face down on a
stable work surface that is larger than the TV.
TV wireless system may be operated in following countries:
• To prevent damaging the surface of the LCD display, make sure
AT, BE, HR, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LV, LT, LU, MT,
to place a soft cloth on the work surface.
NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR, AL, BA, MK,
Ventilation
MD, RS, ME
• Never cover the ventilation holes or insert anything in the
This equipment can be operated in other non-European
cabinet.
countries.
• Leave space around the TV set as shown below.
• It is strongly recommended that you use a Sony Wall-Mount
Bracket in order to provide adequate air-circulation.
Safety information
Installed on the wall
WARNING
Batteries must not be exposed to excessive heat such as
sunshine, fire or the like.
Installation/Set-up
Install and use the TV set in accordance with the instructions
below in order to avoid any risk of fire, electrical shock or damage
and/or injuries.
Installed with stand
Installation
• The TV set should be installed near an easily accessible mains
socket.
• Place the TV set on a stable, level surface to avoid it from falling
down and cause personal injury or damage to the TV.
• Only qualified service personnel should carry out wall
installations.
• For safety reasons, it is strongly recommended that you use
Sony accessories, including:
Wall-Mount Bracket
• To ensure proper ventilation and prevent the collection of dirt or
• Be sure to use the screws supplied with the Wall-Mount Bracket
dust:
when attaching the Mounting Hooks (Stand) to the TV set. The
Do not lay the TV set flat, install upside down, backwards, or
supplied screws are designed as indicated by illustration when
sideways.
measured from the attaching surface of the Mounting Hook
Do not place the TV set on a shelf, rug, bed or in a closet.
(Stand).
Do not cover the TV set with a cloth, such as curtains, or items
The diameter and length of the screws differ depending on the
such as newspapers, etc.
Wall-Mount Bracket model.
Do not install the TV set as shown below.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
GB
3
7 mm
Screw (supplied with the
Wall-Mount Bracket)
Mounting Hook (Stand)
Hook attachment on rear
of TV set
30 cm
10 cm
10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm
10 cm
6 cm
Leave at least this space around the set.
Air circulation is blocked.
Wall Wall
Mains lead
Environment:
Handle the mains lead and socket as follows in order to avoid any
• Places that are hot, humid, or excessively dusty; where insects
risk of fire, electrical shock or damage and/or injuries:
may enter; where it might be exposed to mechanical vibration,
Use only mains leads supplied by Sony, not other suppliers.
near flammable objects (candles, etc.). The TV set shall not be
Insert the plug fully into the mains socket.
exposed to dripping or splashing and no objects filled with
Operate the TV set on a 220-240 V AC supply only.
liquids, such as vases, shall be placed on the TV.
When wiring cables, be sure to unplug the mains lead for your
• Do not place the TV in a humid or dusty
safety and take care not to catch your feet on the cables.
space, or in a room with oily smoke or
Disconnect the mains lead from the mains socket before
steam (near cooking tables or
working on or moving the TV set.
humidifiers). Fire, electric shock, or
Keep the mains lead away from heat sources.
warping may result.
Unplug the mains plug and clean it regularly. If the plug is
covered with dust and it picks up moisture, its insulation may
• Do not install the TV in places subject to extreme temperature
deteriorate, which could result in a fire.
such as in direct sunlight, near a radiator or a heating vent. The
TV may overheat in such condition which can cause
Note
deformation of the enclosure and/or TV malfunction.
• Do not use the supplied mains lead on any other equipment.
• Do not pinch, bend, or twist the mains lead excessively. The core
conductors may be exposed or broken.
• Do not modify the mains lead.
• Do not put anything heavy on the mains lead.
• Do not pull on the mains lead itself when disconnecting the
mains lead.
Situation:
• Do not connect too many appliances to the same mains socket.
• Do not use when your hands are wet, with the cabinet removed,
• Do not use a poor fitting mains socket.
or with attachments not recommended by the manufacturer.
Disconnect the TV set from mains socket and aerial during
NOTE ON MAINS ADAPTOR
lightning storms.
Warning
• Do not install the TV so that it sticks out
To reduce the risk of fire or electric shock, do not expose this
into an open space. Injury or damage
apparatus to rain or moisture.
from a person or object bumping into the
To prevent fire or shock hazard, do not place objects filled with
TV may result.
liquids, such as vases, on the apparatus. Do not install this
equipment in a confined space, such as a bookshelf or similar
unit.
• Please ensure that the mains socket is installed near the
Broken pieces:
equipment and shall be easily accessible.
• Do not throw anything at the TV set. The screen glass may break
• Be sure to use the supplied mains adaptor and mains lead.
by the impact and cause serious injury.
• Do not use any other mains adaptor. It may cause a
• If the surface of the TV set cracks, do not touch it until you have
malfunction.
unplugged the mains lead. Otherwise electric shock may result.
• Connect the mains adaptor to an easily accessible mains socket.
• Do not coil the mains lead around the
When not in use
mains adaptor. The core wire may be cut
and/or it may cause a malfunction of the
• If you will not be using the TV set for several days, the TV set
media receiver.
should be disconnected from the mains for environmental and
safety reasons.
• As the TV set is not disconnected from the mains when the TV
• Do not touch the mains adaptor with wet hands.
set is just turned off, pull the plug from the mains to disconnect
• If you notice an abnormality in the mains adaptor, disconnect it
the TV set completely.
from the mains socket immediately.
• However, some TV sets may have features that require the TV
• The set is not disconnected from the mains source as long as it
set to be left in standby to work correctly.
is connected to the mains socket, even if the set itself has been
turned off.
• As the mains adaptor will become warm when it is used for a
For children
long time, you may feel hot when touching it by hand.
• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that they
Prohibited Usage
are not mistakenly swallowed.
Do not install/use the TV set in locations, environments or
situations such as those listed below, or the TV set may
If the following problems occur...
malfunction and cause a fire, electrical shock, damage and/or
Turn off the TV set and unplug the mains lead immediately if any
injuries.
of the following problems occur.
Location:
Ask your dealer or Sony service centre to have it checked by
qualified service personnel.
• Outdoors (in direct sunlight), at the seashore, on a ship or other
vessel, inside a vehicle, in medical institutions, unstable
When:
locations, near water, rain, moisture or smoke.
Mains lead is damaged.
• If the TV is placed in the changing room of
Poor fitting of mains socket.
a public bath or hot spring, the TV may be
TV set is damaged by being dropped, hit or having something
damaged by airborne sulphur, etc.
thrown at it.
Any liquid or solid object falls through openings in the cabinet.
About LCD Monitor Temperature
• For best picture quality, do not expose the screen to direct
illumination or sunlight.
When the LCD Monitor is used for an extended period, the panel
• Avoid moving the TV from a cold area to a warm area. Sudden
surrounds become warm. You may feel hot when touching there
room temperature changes may cause moisture condensation.
by the hand.
This may cause the TV to show poor picture and/or poor colour.
Should this occur, allow moisture to evaporate completely
before powering the TV on.
GB
4
WALL-MOUNT BRACKET
GB
Below information shows the correct handling of the Wall-Mount
Bracket. Be sure to read this information thoroughly and use the
Viewing the TV
Wall-Mount Bracket correctly.
• Some people may experience discomfort (such as eye strain,
To Customers:
fatigue, or nausea) while watching 3D video images or playing
Be sure to observe the following precautions for safety to prevent
stereoscopic 3D games. Sony recommends that all viewers take
a serious injury through fire, electric shock, the product toppling
regular breaks while watching 3D video images or playing
over, or the product dropping.
stereoscopic 3D games. The length and frequency of necessary
• Be sure to subcontract the installation to licensed contractors
breaks will vary from person to person. You must decide what
and keep small children away during installation.
works best. If you experience any discomfort, you should stop
• Be sure to subcontract moving or dismounting of the TV to
watching the 3D video images or playing stereoscopic 3D
licensed contractors.
games until the discomfort ends; consult a doctor if you believe
• Do not remove screws, etc., after mounting the TV.
necessary. You should also review (i) the instruction manual of
• Do not make alterations to the parts of the Wall-Mount Bracket.
any other device or media used with this television and (ii) our
• Do not mount any equipment other than the specified product.
website (http://support.sony-europe.com/) for the latest
• Do not apply any load other than the TV on the Wall-Mount
information. The vision of young children (especially those
Bracket.
under six years old) is still under development. Consult your
• Do not lean on or hang from the TV.
doctor (such as a paediatrician or eye doctor) before allowing
• Do not handle the TV with excessive force during cleaning or
young children to watch 3D video images or play stereoscopic
maintenance.
3D games. Adults should supervise young children to ensure
To Sony Dealers and Contractors:
they follow the recommendations listed above.
• Do not use, store, or leave the 3D Glasses or battery near fire, or
The following instructions are for Sony dealers and contractors
in places with a high temperature, e.g., in direct sunlight, or in
only. Be sure to read safety precautions described below and pay
sun-heated cars.
special attention to safety during the installation, maintenance
• When using the simulated 3D function, please note that the
and checking of this product.
displayed image is modified from the original due to the
• When handling or mounting the TV set, hold it on the sides. Do
conversion done by this television.
not lift the TV by the Stand.
• View the TV in moderate light, as viewing the TV in poor light or
during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
LCD Screen
• Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective, black
dots may appear or bright points of light (red, blue, or green)
may appear constantly on the LCD screen. This is a structural
property of the LCD screen and is not a malfunction.
• Do not push or scratch the front filter, or place objects on top of
this TV set. The image may be uneven or the LCD screen may be
damaged.
• If this TV set is used in a cold place, a smear may occur in the
picture or the picture may become dark. This does not indicate a
failure. These phenomena disappear as the temperature rises.
• Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in use. This
• Do not install the Wall-Mount Bracket on wall
is not a malfunction.
surfaces where the corners or the sides of the TV
• The LCD screen contains a small amount of liquid crystal. Follow
are protruding away from the wall surface.
your local ordinances and regulations for disposal.
Handling and cleaning the screen surface/
• Do not install the TV over or under an air
conditioner.
cabinet of the TV set
• Be sure to install the Wall-Mount Bracket
Be sure to unplug the mains lead connected to the TV set from
securely to the wall following the instructions in
mains socket before cleaning.
this instruction manual. If any of the screws are
To avoid material degradation or screen coating degradation,
loose or fall out, the Wall-Mount Bracket may
observe the following precautions.
fall and cause injury or property damage.
• To remove dust from the screen surface/cabinet, wipe gently
• Be sure to use the supplied screws and
with a soft cloth. If dust is persistent, wipe with a soft cloth
attachment parts properly following the
slightly moistened with a diluted mild detergent solution.
instructions given in this instruction manual. If
• Never spray water or detergent directly on
you use substitute items, the TV may fall and
the TV set. It may drip to the bottom of the
cause bodily injury to someone or damage to the TV.
screen or exterior parts and enter the TV
• Be sure to assemble the bracket properly following the
set, and may cause damage to the TV set.
instructed procedure explained in this instruction manual.
• Never use any type of abrasive pad,
• Be sure to tighten the screws securely in the designated
alkaline/acid cleaner, scouring powder, or
position.
volatile solvent, such as alcohol, benzene,
• Be careful not to subject the TV to shock during installation.
thinner or insecticide. Using such materials or maintaining
• Be sure to install the TV on a wall that is both perpendicular and
prolonged contact with rubber or vinyl materials may result in
flat.
damage to the screen surface and cabinet material.
• After proper installation of the TV, secure the cables properly.
• Periodic vacuuming of the ventilation openings is
• Do not allow the mains lead or the connecting
recommended to ensure to proper ventilation.
cables to be pinched as the internal conductors
• When adjusting the angle of the TV set, move it slowly so as to
may become exposed and cause a short circuit
prevent the TV set from moving or slipping off from its table
or an electrical break.
stand.
GB
5
Stand Stand
Precautions
Optional Equipment
Disposal of waste batteries
• Keep optional components or any equipment emitting
(applicable in the European Union
electromagnetic radiation away from the TV set. Otherwise
and other European countries with
picture distortion and/or noisy sound may occur.
separate collection systems)
• This equipment has been tested and found to comply with the
This symbol on the battery or on the packaging
limits set out in the EMC Directive using a connection signal
indicates that the battery provided with this
cable shorter than 3 meters.
product shall not be treated as household waste. On certain
batteries this symbol might be used in combination with a
Recommendation of F-type plug
chemical symbol. The chemical symbols for mercury (Hg) or lead
Projection of the inner wire from the connection part must be less
(Pb) are added if the battery contains more than 0.0005%
than 1.5 mm.
mercury or 0.004% lead. By ensuring these batteries are disposed
of correctly, you will help prevent potentially negative
consequences for the environment and human health which
could otherwise be caused by inappropriate waste handling of
the battery. The recycling of the materials will help to conserve
natural resources. In case of products that for safety, performance
or data integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by qualified
Caution about handling the remote control
service staff only. To ensure that the battery will be treated
• Observe the correct polarity when inserting batteries.
properly, hand over the product at end-of-life to the applicable
• Do not use different types of batteries together or mix old and
collection point for the recycling of electrical and electronic
new batteries.
equipment. For all other batteries, please view the section on how
• Dispose of batteries in an environmentally friendly way. Certain
to remove the battery from the product safely. Hand the battery
regions may regulate the disposal of batteries. Please consult
over to the applicable collection point for the recycling of waste
your local authority.
batteries. For more detailed information about recycling of this
• Handle the remote control with care. Do not drop or step on it,
product or battery, please contact your local Civic Office, your
or spill liquid of any kind onto it.
household waste disposal service or the shop where you
• Do not place the remote control in a location near a heat source,
purchased the product.
a place subject to direct sunlight, or a damp room.
Wireless Function of the unit
• Do not operate this unit near medical equipment (pacemaker,
etc.), as malfunction of the medical equipment may result.
• Although this unit transmits/receives scrambled signals, be
careful of unauthorised interception. We cannot be responsible
for any trouble as a result.
WALL-MOUNT BRACKET
• If you use the TV installed on the Wall-Mount Bracket for a long
time, the wall behind or above the TV may become discoloured
or the wallpaper may come unglued, depending on the material
of the wall.
• If the Wall-Mount Bracket is removed after installing it on the
wall, the screw holes remain.
• Do not use the Wall-Mount Bracket in a place where it is
subjected to mechanical vibration.
Disposal of the TV set
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated
as household waste. Instead it shall be handed
over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to
conserve natural resources. For more detailed information about
recycling of this product, please contact your local Civic Office,
your household waste disposal service or the shop where you
purchased the product.
GB
6
7 mm max.
1.5 mm max.
(Reference drawing of the F type plug)
GB
Installing the TV to the Wall
To Customers
Sufficient expertise is required for installing this product. Be sure to subcontract the installation to Sony
dealers or licensed contractors and pay special attention to safety during the installation. Sony is not liable
for any damages or injury caused by mishandling or improper installation, or installing any other than the
specified product. Your Statutory Rights (if any) are not affected.
To Sony Dealers and Contractors
Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly
to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or
improper installation.
Your TV’s Table-Top Stand will be used as a part of the Wall-Mount Bracket.
Note
• See page 3 (Safety information) and page 5 (Precautions) on WALL-MOUNT BRACKET before carrying out Wall-Mount
Bracket installation.
• If the Table-Top Stand is attached to the TV, detach the Table-Top Stand beforehand.
• Place the TV with its screen facing down on a flat and stable surface covered with a thick and soft cloth that is larger
than the TV, when securing the Stand or when removing the Table-Top Stand from the TV to prevent damaging the
surface of the LCD display.
• Once the Stand Necks are detached from the Stand, be sure to keep the Stand Necks and screws in a safe place.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes
on the rear of the TV.
• Be sure the TV is on the vertical position before switching on. TV set must not powered on with LCD panel face down
to avoid uneven picture uniformity.
To detach the Table-Top Stand from the TV
GB
7
Stand Necks
Stand
Soft cloth
Installing the Brackets on the wall
1 Prepare necessary items.
Wall-Mount Bracket accessories (supplied)
A Paper Template B Wall-Mount Base
C Stand Protector
D Screw
KDL-50W82xB,
KDL-50W82xB,
(+PSW 6 × 12) (2)
KDL-50W81xB,
KDL-50W81xB,
KDL-50W80xB,
KDL-50W80xB,
KDL-50W70xB (2)
KDL-50W70xB (2)
KDL-42W82xB,
KDL-42W82xB,
KDL-42W81xB,
KDL-42W81xB,
KDL-42W80xB,
KDL-42W80xB,
KDL-42/32W70xB (1)
KDL-42/32W70xB (1)
E Spacer (2) F Bracket Cap Plate
G Screw (+PSW 4 × 10)
KDL-50W82xB,
KDL-50W82xB,
KDL-50W81xB,
KDL-50W81xB,
KDL-50W80xB,
KDL-50W80xB,
KDL-50W70xB (2)
KDL-50W70xB (2)
KDL-42W82xB,
KDL-42W82xB,
KDL-42W81xB,
KDL-42W81xB,
KDL-42W80xB,
KDL-42W80xB,
KDL-42/32W70xB (1)
KDL-42/32W70xB (1)
Stand (supplied)
H
Screws for Wall-Mount Base (8 mm in diameter, not supplied)
KDL-50W82xB,
KDL-50W81xB,
KDL-50W80xB,
KDL-50W70xB (8)
KDL-42W82xB,
KDL-42W81xB,
KDL-42W80xB,
KDL-42/32W70xB (4)
GB
8
2 Make sure that the wall has enough space and is capable of supporting a weight of at
GB
least four times that of the TV.
Refer to the following table on installing the TV to the wall. See page 15-17 (Specifications)
for the TV’s weight.
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB, KDL-50W70xB
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB, KDL-42/32W70xB
Unit: cm
Display dimensions Screen centre dimension Length for mounting
Model Name
KDL-
50W82xB/
50W81xB/
111.6 65.6 13.0 46.9 11.8
50W80xB/
50W70xB
42W82xB/
42W81xB/
95.8 56.3 17.5 46.5 11.8
42W80xB/
42W70xB
32W70xB 72.9 43.3 18.8 41.3 11.3
Note
• Figures in the table may differ slightly depending on the installation.
GB
9
Screen centre point
Screen centre point
3 Make a mark on the Paper Template A that indicates the centre of the screen for your TV.
4 Tape the Paper Template A to the wall and drill holes according to the numbering on the
Paper Template A using an electric drill.
5 Remove the Paper Template A off from the wall.
6 Attach the Wall-Mount Base B to the wall correctly using the screws (8 mm in diameter,
not supplied).
GB
10
100
150
200
250
KDL‐50W82xB, KDL‐50W81xB,
KDL-42W82xB, KDL-42W81xB,
KDL‐50W80xB, KDL-50W70xB
KDL-42W80xB, KDL-42/32W70xB
Scale on Paper Template A
Scale on Paper Template A
Mark for KDL‐50W82xB, KDL‐50W81xB,
KDL‐50W80xB, KDL-50W70xB
Mark for KDL-42W82xB,
KDL-42W81xB, KDL-42W80xB,
KDL-42W70xB
Mark for KDL‐32W70xB
100
100
150
150
200
200
250
250
30
20
1
10
0
3
1, 2, 3, 4
2
4
50
100
150
200
250
300
350
1, 2, 3, 4
30
30
1
10
0
3
5
0
10
20
7
2
4
6
8
50
50
100
100
150
150
200
200
250
250
300
300
350
350
20
5, 6, 7, 8
KDL‐50W82xB, KDL‐50W81xB,
KDL-42W82xB, KDL-42W81xB,
KDL‐50W80xB, KDL-50W70xB
KDL-42W80xB, KDL-42/32W70xB
Wall
Wall
A
A
KDL‐50W82xB, KDL‐50W81xB,
KDL-42W82xB, KDL-42W81xB,
KDL‐50W80xB, KDL-50W70xB
KDL-42W80xB, KDL-42/32W70xB
Preparing for the installation of the TV
GB
1 Remove screws from the rear of the TV. Be sure to store the removed screws in a safe
place, keeping them away from children.
2 Insert the pin (on the Stand Protector C) into the hole on the Stand H, then fold up the
Stand Protector C. Confirm the Stand Protector C is firmly latched to the Stand H.
3 Attach the stand H to the TV using the supplied screws D. Attach the Spacers E to the
holes indicated by the triangle marks f. KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
KDL-50W70xB is used for illustration purpose.
GB
11
Soft cloth
HH
KDL‐50W82xB, KDL‐50W81xB,
KDL-42W82xB, KDL-42W81xB,
KDL‐50W80xB, KDL-50W70xB
KDL-42W80xB, KDL-42/32W70xB
Pin
D
H
E
×
2
Soft cloth
Installing the TV on the wall
1 Make sure to connect and bundle the cables before installing the TV on the wall.
2 Install the TV on the wall. Then, confirm the Stand Protector C is firmly latched into the
Wall-Mount Base B and the Spacers E touch the wall. Attach the Bracket Cap Plate F
using the supplied screws G.
GB
12
1
1
C
C
B
B
B
2
G
2
G
F
F
B
E
KDL‐50W82xB, KDL‐50W81xB,
KDL-42W82xB, KDL-42W81xB,
KDL‐50W80xB, KDL-50W70xB
KDL-42W80xB, KDL-42/32W70xB
Wall
Wall
Dimensions of the hole positions on the wall
GB
Provide the following information to the licensed contractors if necessary.
Use screws (8 mm in diameter, not supplied) to install the Wall-Mount Base B on the wall.
Be sure to use the supplied Paper Template A that shows the actual position of Wall-Mount Base for
easy installation.
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB, KDL-50W70xB
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB, KDL-42/32W70xB
For instructions on Wall-Mount Bracket installation of your TV model, refer to the following website:
www.sony.eu/tv/wall-mount-bracket-manual
GB
13
76 mm 76 mm
BB
176 mm
28 mm 28 mm
76 mm
B
28 mm
The [Parental Lock] password has been
forgotten.
Troubleshooting
Enter 9999 for the PIN code. (PIN code 9999 is
always accepted.)
When the illumination LED is flashing in red,
count how many times it flashes (interval
The TV surrounds become warm.
time is three seconds).
When the TV is used for an extended period, the
If the illumination LED flashes red, reset the TV
TV surrounds become warm.
by disconnecting the mains lead from the TV for
You may feel hot when touching there by the
two minutes, then turn on the TV.
hand.
If the problem persists, contact your dealer or
Frozen audio or video, a blank screen, or the
Sony service centre with the number of times
TV does not respond to TV or remote buttons.
the Illumination LED flashes red (interval time is
three seconds). Press / on the TV to turn it
Perform a simple reset of the TV by unplugging
the AC power cord for two minutes, then plug it in
off, disconnect the mains lead, and inform your
again.
dealer or Sony service centre.
The /, CH+/–, +/–, ///, , and
When the illumination LED is not flashing,
HOME buttons cannot be located on the TV.
check the items as follows.
You can also refer to [Troubleshooting] in the i-
See below illustration for location of the buttons
Manual or perform self-diagnosis by selecting
on the TV.
[Help] t [Customer Support] t [Self
Diagnostics]. If the problem persists, have your
TV serviced by qualified service personnel.
Troubles and Solutions
There is no picture (screen is dark) and no
sound.
Check the antenna (aerial)/cable connection.
The illumination LED is turned on.
Connect the TV to AC power (mains), and press /
If you do not wish to light up the illumination LED,
on the TV or remote.
you can turn it off.
Some programmes cannot be tuned.
Press HOME, then select [Settings] t
Check the antenna (aerial) or dish.
[System Settings] t [General Set-up] t
The satellite cable might be short-circuited or
[Illumination LED] t [Off]. You can also press
there might be connection problems of the cable.
OPTIONS, then select [Illumination LED] t [Off].
Check the cable connection and then turn the TV
off with the Mains power On/Off switch, and turn
it on again.
The frequency that you entered is out of range.
Consult the received satellite broadcasting
company.
There is no Cable TV services (programmes)
found.
Cannot connect to a wireless router by WPS.
Check the cable connection or tuning
If you use WEP security, select [Easy] t [Wi-Fi] t
configuration.
[Connect by scan list].
Attempt the [Digital Auto Tuning] by selecting
Then, select the network name (SSID) you want to
[Antenna] instead of [Cable].
connect.
The remote does not function.
Cannot find the required network name in
Replace the batteries.
network setup.
Your TV may be in SYNC mode.
Select [[Manual Entry]] and press to enter
Press SYNC MENU, select [TV Control] and then
network name.
select [Home (Menu)] or [Options] to control the
TV.
GB
14
Rear of TV
Video (3D):
Frame Packing: 1080p (30 Hz), 1080/24p,
GB
Specifications
1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p
Side-by-Side: 1080p (50, 60 Hz), 1080/24p,
System
1080i (50, 60 Hz), 720p (50, 60 Hz)
Over-Under: 1080p (30, 50, 60 Hz), 1080/24p,
Panel system
1080i (50, 60 Hz), 720p (50, 60 Hz)
LCD (Liquid Crystal Display) Panel, LED Backlight
Audio: 5.1 channel linear PCM: 32, 44.1 and
TV system
48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue: Depending on your country/area
ARC (Audio Return Channel) (HDMI IN 2 only)
selection: B/G, D/K, L, I, M
HDMI IN 1, 2, 3, 4 (KDL-50/42/32W70xB only)
Digital: DVB-T/DVB-C
Video: 1080p (30, 50, 60 Hz), 1080/24p,
DVB-T2
1080i (50, 60 Hz), 720p (30, 50, 60 Hz),
Satellite: DVB-S/DVB-S2
720/24p, 576p, 576i, 480p, 480i, PC Formats
Colour/video system
Audio: 5.1 channel linear PCM: 32, 44.1 and
Analogue: PAL, SECAM, NTSC3.58, NTSC4.43
48 kHz, 16, 20 and 24 bits, Dolby Digital
Digital: Refer to the i-Manual.
ARC (Audio Return Channel) (HDMI IN 2 only)
Channel coverage
MHL (common with HDMI IN 1)
Analogue: UHF/VHF/Cable, Depending on your
(except KDL-50/42/32W70xB)
country/area selection.
Video (2D): 1080p (30 Hz), 1080/24p,
Digital: UHF/VHF/Cable, Depending on your
1080i (50, 60 Hz), 720p (30, 50, 60 Hz),
country/area selection.
720/24p, 576p, 576i, 480p, 480i
Satellite: IF Frequency 950-2150 MHz
Video (3D):
Sound output
Side-by-Side: 1080/24p, 1080i (50, 60 Hz),
8 W + 8 W (except KDL-32W70xB)
720p (50, 60 Hz)
5 W + 5 W (KDL‐32W70xB only)
Over-Under: 1080p (30 Hz), 1080/24p,
Wireless technology
1080i (50, 60 Hz), 720p (50, 60 Hz)
Protocol IEEE802.11a/b/g/n
Audio: 5.1 channel linear PCM: 32, 44.1 and
48 kHz, 16, 20 and 24 bits, Dolby Digital
Input/Output jacks
MHL (common with HDMI IN 1)
Antenna (aerial) cable
(KDL-50/42/32W70xB only)
75 ohm external terminal for VHF/UHF
Video: 1080p (30 Hz), 1080/24p, 1080i (50, 60 Hz),
720p (30, 50, 60 Hz), 720/24p, 576p, 576i, 480p,
Satellite antenna
480i
Female F-Type Connector IEC169-24, 75 ohm.
Audio: 5.1 channel linear PCM: 32, 44.1 and
DiSEqC 1.0, LNB 13 V/18 V & 22 kHz tone, Single
48 kHz, 16, 20 and 24 bits, Dolby Digital
Cable Distribution EN50494.
DIGITAL AUDIO OUT (OPTICAL)
/AV1
Digital optical jack (Two channel linear PCM,
21-pin scart connector (CENELEC standard)
Dolby Digital)
including audio/video input, RGB input and TV
audio/video output.
AUDIO OUT/
Audio output (stereo mini jack)
/ COMPONENT IN
Headphone jack
YPBPR (Component Video): 1080p (50, 60 Hz),
(supports Subwoofer out)
1080i (50, 60 Hz), 720p (50, 60 Hz), 576p, 576i,
480p, 480i
1 (HDD REC), 2
Audio input (phono jacks)
USB HDD device port ( 1 only), USB port
t
AV2
Video input (common phono pin with Y input)
CAM (Conditional Access Module) slot
HDMI IN 1, 2, 3, 4 (except KDL-50/42/32W70xB)
DC IN 19.5 V
Video (2D): 1080p (30, 50, 60 Hz), 1080/24p, 1080i
AC adapter input
(50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p, 576p,
LAN
576i, 480p, 480i, PC Formats
10BASE-T/100BASE-TX connector (Depending on
the operating environment of the network,
connection speed may differ. 10BASE-T/
100BASE-TX communication rate and
communication quality are not guaranteed for
this TV.)
GB
15
1
Others
Average annual energy consumption*
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
Optional accessories
KDL-50W70xB: 71 kWh
Touchpad Remote Control: RMF-ED004
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
Camera and Microphone Unit: CMU-BR200/
KDL-42W70xB: 69 kWh
CMU-BR100
KDL‐32W70xB: 54 kWh
Wireless subwoofer: SWF-BR100
2
MHL cable: DLC-MB10/DLC-MB20/DLC-MC10/
Standby power consumption*
DLC-MC20
0.5 W (10 W in software/EPG update mode)
Active 3D Glasses: TDG-BT500A (KDL‐50W82xB,
Display resolution
KDL‐50W81xB, KDL‐50W80xB only)
1,920 dots (horizontal) × 1,080 lines (vertical)
Dimensions (Approx.) (w × h × d)
with Table-Top Stand
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
Passive 3D Glasses: TDG-500P (KDL-42W82xB,
KDL-50W70xB: 111.6 × 69.3 × 17.9 cm
KDL-42W81xB, KDL-42W80xB only)
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
KDL-42W70xB: 95.8 × 60.0 × 17.0 cm
KDL‐32W70xB: 72.9 × 46.5 × 14.1 cm
without Table-Top Stand
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
Operating temperature
KDL-50W70xB: 111.6 × 65.6 × 6.4 cm
0 ºC – 40 ºC
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
Operating humidity
KDL-42W70xB: 95.8 × 56.3 × 6.4 cm
10 % – 80 % RH (non-condensing)
KDL‐32W70xB: 72.9 × 43.3 × 6.4 cm
Power and others
Mass (Approx.)
Power requirements
with Table-Top Stand
19.5 V DC with AC adapter
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
Rating: Input 220 V - 240 V AC, 50 Hz
KDL-50W70xB: 14.8 kg
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
Energy Efficiency Class
KDL-42W70xB: 11.7 kg
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
KDL‐32W70xB: 7.9 kg
KDL-50W70xB: A++
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
without Table-Top Stand
KDL-42W70xB: A+
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
KDL‐32W70xB: A
KDL-50W70xB: 13.6 kg
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
Screen size (measured diagonally) (Approx.)
KDL-42W70xB: 10.5 kg
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
KDL‐32W70xB: 6.9 kg
KDL-50W70xB: 50 inches / 125.7 cm
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
1
*
Energy consumption per year, based on the power
KDL-42W70xB: 42 inches / 106.7 cm
consumption of the television operating 4 hours per
KDL‐32W70xB: 32 inches / 80.1 cm
day for 365 days. The actual energy consumption
Power consumption
will depend on how the television is used.
2
*
Specified standby power is reached after the TV
in [Standard] mode
finishes necessary internal processes.
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
Note
KDL-50W70xB: 51 W
• The "x" that appears in the model name corresponds
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
to a numeric digit, related to design, colour or TV
KDL-42W70xB: 50 W
system.
KDL‐32W70xB: 39 W
• Do not remove the dummy card from TV CAM
(Conditional Access Module) slot other than to insert a
in [Vivid] mode
smart card fitted in CAM.
KDL‐50W82xB, KDL‐50W81xB, KDL‐50W80xB,
• Optional accessories availability depends on
KDL-50W70xB: 100 W
countries/region/TV model/stock.
KDL-42W82xB, KDL-42W81xB, KDL-42W80xB,
• Design and specifications are subject to change
without notice.
KDL-42W70xB: 99 W
•This TV set incorporates MHL 2.
KDL‐32W70xB: 80 W
GB
16
Notes on Digital TV function
• Opera® Devices SDK from Opera Software
GB
ASA. Copyright 1995-2014 Opera Software
• Any functions related to Digital TV ( ) will
ASA. All rights reserved.
only work in countries or areas where
• Wi-Fi, Wi-Fi Direct and Miracast are
DVB-T/DVB-T2 (MPEG-2 and H.264/MPEG-4
trademarks or registered trademarks of
AVC) digital terrestrial signals are broadcast
Wi-Fi Alliance.
or where you have access to a compatible
• “Sony Entertainment Network logo” and
DVB-C (MPEG-2 and H.264/MPEG-4 AVC)
“Sony Entertainment Network” are
cable service. Please confirm with your
trademarks of Sony Corporation.
local dealer if you can receive a DVB-T/
• MHL, Mobile High-Definition Link and the
DVB-T2 signal where you live or ask your
MHL Logo are trademarks or registered
cable provider if their DVB-C cable service
trademarks of MHL Licensing, LLC.
is suitable for integrated operation with
• For DTS patents, see
this TV.
http://patents.dts.com. Manufactured
• Your cable provider may charge a fee for
under license from DTS Licensing Limited.
their services, or require you to agree to its
DTS, the Symbol, & DTS and the Symbol
terms and conditions of business.
together are registered trademarks, and
• This TV set complies with DVB-T/DVB-T2
DTS Digital Surround is a trademark of DTS,
and DVB-C specifications, but compatibility
Inc. © DTS, Inc. All Rights Reserved.
with future DVB-T/DVB-T2 digital terrestrial
TM
• Designed with UEI Technology
and DVB-C digital cable broadcasts are not
Under License from Universal Electronics
guaranteed.
Inc. Portions © UEI 2000 – 2013
• Some Digital TV functions may not be
• The Bluetooth® word mark and logos are
available in some countries/areas and
owned by the Bluetooth SIG, Inc. and any
DVB-C cable may not operate correctly with
use of such marks by Sony Corporation is
some providers.
under license. Other trademarks and trade
Trademark information
names are those of their respective
owners.
• The terms HDMI and HDMI High-Definition
• DiSEqC™ is a trademark of EUTELSAT.
Multimedia Interface, and the HDMI Logo
This TV supports DiSEqC 1.0. This TV is not
are trademarks or registered trademarks of
intended for controlling motorized
HDMI Licensing LLC in the United States
antennas.
and other countries.
• DLNA®, the DLNA Logo and DLNA
CERTIFIED® are trademarks, service marks,
or certification marks of the Digital Living
Network Alliance.
• Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
• “BRAVIA” and are trademarks of
Sony Corporation.
• TrackID is a trademark or registered
trademark of Sony Mobile Communications
AB.
• Gracenote, Gracenote eyeQ, Gracenote
VideoID, Gracenote Video Explore,
Gracenote MusicID, the Gracenote logo
and logotype, and the “Powered by
Gracenote” logo are either registered
trademarks or trademarks of Gracenote in
the United States and/or other countries.
GB
17