Sony CDX-R3350EE: инструкция
Раздел: Авто, мото оборудование и транспорт
Тип: Автомагнитола
Характеристики, спецификации
Инструкция к Автомагнитоле Sony CDX-R3350EE
2-515-510-32 (1)
FM
/
AM
Compact Disc
Player
GB
Operating Instructions
RU
Инструкция по эксплуатации
For installation and connections, see the supplied installation/connections manual.
Перед установкой и подсоединениями прочитайте прилагаемую инструкцию
по установке и подсоединению.
CDX-R3350EE
CDX-R33EE
© 2005 Sony Corporation
Welcome !
Warning if your car’s ignition has no
ACC position
Thank you for purchasing this Sony Compact
After turning the ignition off, be sure to press
Disc Player. You can enjoy your drive with the
and hold (OFF) on the unit until the display
following functions.
disappears.
• CD playback:
Otherwise, the display does not turn off and
You can play CD-DA (also containing CD
this causes battery drain.
TEXT*), CD-R/CD-RW (MP3 files also
containing Multi Session (page 11)) and
ATRAC CD (ATRAC3 and ATRAC3plus
format (page 12)).
Type of discs Label on the disc
This label is located on the bottom of the
CD-DA
chassis.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
MP3
collection systems)
ATRAC CD
This symbol on the product or on its
packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
• Radio reception:
disposed of correctly, you will help prevent potential
–You can store up to 6 stations per band (FM1,
negative consequences for the environment and human
FM2, FM3, AM1 and AM2).
health, which could otherwise be caused by inappropriate
–BTM (Best Tuning Memory) function: the
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
unit selects strong signal stations and stores
information about recycling of this product, please contact
them.
your local Civic Office, your household waste disposal
* A CD TEXT disc is a CD-DA that includes
service or the shop where you purchased the product.
information such as disc, artist and track name.
SonicStage and its logo are trademarks of Sony
Corporation.
ATRAC, ATRAC3, ATRAC3plus and their logos
are trademarks of Sony Corporation.
2
Table of Contents
Getting Started
Other functions
Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4
Changing the sound settings. . . . . . . . . . . . . . . 9
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjusting the sound characteristics
DEMO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
— BAL/FAD/SUB . . . . . . . . . . . . . . . . . . . 9
Detaching the front panel . . . . . . . . . . . . . . . . . 4
Adjusting the equalizer curve — EQ3 . . . . 9
Attaching the front panel . . . . . . . . . . . . . . . 4
Adjusting setup items — SET . . . . . . . . . . . . . 9
Inserting the disc in the unit . . . . . . . . . . . . . . . 5
Using optional equipment. . . . . . . . . . . . . . . . 10
Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 5
Rotary commander RM-X4S . . . . . . . . . . 10
Location of controls and basic
Additional Information
operations
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Notes on discs . . . . . . . . . . . . . . . . . . . . . . 11
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About MP3 files . . . . . . . . . . . . . . . . . . . . 11
Card remote commander RM-X151 . . . . . . 6
About ATRAC CD . . . . . . . . . . . . . . . . . . 12
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CD
Removing the unit. . . . . . . . . . . . . . . . . . . . . . 13
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 13
Display items . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 14
Repeat and shuffle play . . . . . . . . . . . . . . . . 8
Error displays/Messages . . . . . . . . . . . . . . 15
Radio
Storing and receiving stations . . . . . . . . . . . . . . 8
Storing automatically — BTM . . . . . . . . . . 8
Storing manually . . . . . . . . . . . . . . . . . . . . . 8
Receiving the stored stations . . . . . . . . . . . . 8
Tuning automatically . . . . . . . . . . . . . . . . . . 8
3
Getting Started
Detaching the front panel
Resetting the unit
You can detach the front panel of this unit to
prevent theft.
Before operating the unit for the first time, or
after replacing the car battery or changing the
Caution alarm
connections, you must reset the unit.
If you turn the ignition switch to the OFF
Detach the front panel and press the RESET
position without detaching the front panel, the
button with a pointed object, such as a ballpoint
caution alarm will sound for a few seconds.
pen.
The alarm will only sound if the built-in
amplifier is used.
1 Press (OFF).
RESET
The unit is turned off.
button
2 Press , then pull it off towards you.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
(OFF)
Setting the clock
The clock uses a 24-hour digital indication.
1 Press and hold (SEL).
The setup display appears.
Notes
• Do not drop or put excessive pressure on the front
2 Press (SEL) repeatedly until “CLOCK-
panel and display window.
ADJ” appears.
• Do not subject the front panel to heat/high
temperature or moisture. Avoid leaving it in a parked
3 Press (DSPL ) .
car or on a dashboard/rear tray.
The hour indication flashes.
Tip
4 Press the volume +/– button to set the
When carrying the front panel, use the supplied front
hour and minute.
panel case.
To move the digital indication, press (DSPL).
5 Press (SEL).
The clock starts and the next setup display
Attaching the front panel
appears.
Engage part A of the front panel with part B of
6 Press and hold (SEL).
the unit, as illustrated, and push the left side into
The setup is complete.
position until it clicks.
To display the clock, press (DSPL) . Press
(DSPL) again to return to the previous display.
With the card remote commander
In step 4, to set the hour and minute, press M or m.
DEMO mode
When the unit is turned off, the clock is
displayed first, then demonstration (DEMO)
A
mode starts the demonstration display.
B
To cancel the DEMO mode, set “DEMO-OFF”
in setup (page 9) while the unit is turned off.
Note
Do not put anything on the inner surface of the front
panel.
4
Inserting the disc in the
Ejecting the disc
unit
1
Open the shutter.
1 Open the shutter.
x
2 Insert the disc label side up.
Playback starts.
2 Push down the shutter until it clicks.
3 Close the shutter.
Click
x
The disc is ejected.
Notes
• While ejecting or inserting the disc, do not close the
shutter. The disc may be caught and damaged.
• The disc may be ejected if you open the shutter
forcefully.
Tip
The disc can be played with the shutter opened or
closed.
5
Location of controls and basic operations
Main unit
12 3 4 5 6 7 8
ATT OFF
OPEN
SEEK
SEEK
DSPL
EQ3
DIM
–
GP/DISC
+
REP
SHUF
SOURCE MODE
SEL
123456
SENS
BTMSCRL
CDX-R3350EE
CDX-R33EE
9 0 qaqs qd qf qg qh qj qk
Card remote commander RM-X151
7
2
OFF
ATT
qs
0
SOURCE
SEL
MODE
qa
ql
+
wa
–
3
DSPL
SCRL
qh
132
ws
465
+
VOL
w;
–
6
Refer to the pages listed for details. The
r Receptor for the card remote
corresponding buttons on the card remote
commander
commander control the same functions as those
The following buttons on the card remote
on the unit.
commander have also different buttons/functions
a Volume +/– button
from the unit.
To adjust volume.
s < (.)/, (>) buttons
b ATT (attenuate) button
To control radio/CD, the same as (SEEK)
To attenuate the sound. To cancel, press
+/– on the unit. (For details of other
again.
operations, see “With the card remote
c DSPL (display)/DIM (dimmer) button
commander” on each pages.)
4, 8
t VOL (volume) +/– button
To change display items (press); change the
To adjust volume.
display brightness (press and hold).
u M (+)/m (–) buttons
d OPEN shutter, disc slot (located behind
To control CD, the same as (1)/(2) –/+ on
the shutter) 5
the unit. (For details of other operations, see
e Display window
“With the card remote commander” on each
f EQ3 (equalizer) button 9
pages.)
To select an equalizer type (XPLOD,
v Number buttons
VOCAL, CLUB, JAZZ, NEWAGE, ROCK,
To receive stored stations (press); store
CUSTOM or OFF).
stations (press and hold).
g OFF button
Note
To power off/stop the source.
If the unit is turned off and the display disappears, it
h SEEK +/– button
cannot be operated with the card remote commander
Radio:
unless (SOURCE) on the unit is pressed, or a disc is
To tune in stations automatically (press); find
inserted to activate the unit first.
a station manually (press and hold).
Tip
CD:
For details on how to replace the battery, see
To skip tracks (press); skip tracks
“Replacing the lithium battery of the card remote
continuously (press, then press again within
commander” on page 12.
about 1 second and hold); fast-forward/
reverse a track (press and hold).
i (front panel release) button 4
j SOURCE button
To power on/change the source (Radio/CD).
k MODE button 8
To select the radio band (FM/AM).
l SEL (select) button 4, 9
To select items.
m RESET button (located behind the front
panel) 4
n Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2): GP/DISC –/+
To skip groups (press); skip groups
continuously (press and hold).
(3): REP 8
(4): SHUF 8
o SENS button
To improve weak reception: LOCAL/
MONO.
p SCRL (scroll) button 8
To scroll the display item.
q BTM button 8
To start the BTM function. (press and hold)
7
CD
Radio
Storing and receiving
Display items
stations
A
B
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
A Source
Storing automatically — BTM
B Track number/Elapsed playing time,
1
Disc/artist name, Group number*
,
1
Press (SOURCE) repeatedly until
Group name, Track name, Text
“TUNER” appears.
2
information*
, Clock
To change the band, press (MODE)
*1 Group number is displayed only when the group is
repeatedly. You can select from FM1, FM2,
changed.
FM3*, AM1 or AM2.
*2 When playing an MP3, ID3 tag is displayed and
2 Press and hold (BTM) until “BTM”
when playing ATRAC CD, text information written
flashes.
by SonicStage, etc. is displayed.
The unit stores stations in order of frequency
To change display items B , press (DSPL);
on the number buttons.
scroll display items B, press (SCRL) or set
A beep sounds when the setting is stored.
“A.SCRL-ON” (page 9).
* FM3 tuning range is 65 to 74 MHz (at 30KHz step).
Tip
Displayed item will differ, depending on the disc type
and recorded format. For details on MP3, see
page 11; ATRAC CD, see page 12.
Storing manually
1
While receiving the station that you
want to store, press and hold a
Repeat and shuffle play
number button ((1) to (6)) until
“MEM” appears.
1
During playback, press (3) (REP) or
The number button indication appears in the
(4) (SHUF) repeatedly until the
display.
desired setting appears.
Note
Select To play
If you try to store another station on the same number
button, the previous stored station will be replaced.
REP-TRACK track repeatedly.
REP-GP* group repeatedly.
Receiving the stored stations
SHUF-GP* group in random order.
SHUF-DISC disc in random order.
1
Select the band, then press a number
button ((1) to (6)).
* When an MP3/ATRAC CD is played.
With the card remote commander
To return to normal play mode, select “REP-
To select preset stations, press M or m.
OFF” or “SHUF-OFF.”
Tuning automatically
1
Select the band, then press (SEEK) +/–
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold ( SEEK) +/– to locate the
approximate frequency, then press (SEEK) +/–
repeatedly to fine adjust to the desired frequency
8
(manual tuning).
With the card remote commander
In step 3, to adjust the selected item, press <, M, ,,
Other functions
or m.
Changing the sound
settings
Adjusting setup items
— SET
Adjusting the sound
1 Press and hold (SEL).
characteristics — BAL/FAD/SUB
The setup display appears.
You can adjust the balance, fader and subwoofer
2 Press (SEL) repeatedly until the
volume.
desired item appears.
1 Press (SEL) repeatedly until “BAL,”
3 Press the volume +/– button to select
“FAD” or “SUB” appears.
the setting (example “ON” or “OFF”).
The item changes as follows:
4 Press and hold (SEL).
1
1
1
LOW*
t MID*
t HI*
t
The setup is complete and the display returns
BAL (left-right) t FAD (front-rear) t
to normal play/reception mode.
2
SUB (subwoofer volume)*
Note
*1 When EQ3 is activated (page 9).
Displayed items will differ, depending on the source
*2 When the audio output is set to “SUB” (page 9).
and setting.
“ATT” is displayed at the lowest setting, and can
With the card remote commander
be adjusted up to 20 steps.
In step 3, to select the setting, press < or , .
2 Press the volume +/– button
The following items can be set (follow the page
repeatedly to adjust the selected item.
reference for details):
After 3 seconds, the setting is complete and
“
z” indicates the default settings.
the display returns to normal play/reception
mode.
CLOCK-ADJ
(page 4)
Note
(Clock Adjust)
Adjust within 3 seconds of selecting the item.
BEEP To set “BEEP-ON” (
z) or
With the card remote commander
“BEEP-OFF.”
In step 2, to adjust the selected item, press <, M, ,,
or m.
1
SUB/REAR*
To switch the audio output.
–“SUB” (
z): to output to a
subwoofer.
Adjusting the equalizer curve
–“REAR”: to output to a
power amplifier.
— EQ3
DIM (Dimmer) To change the brightness of the
You can adjust and store the equalizer settings
display.
for different tone ranges.
–“DIM-ON”: to dim the
1 Select a source, then press (EQ3)
display.
repeatedly to select the EQ3 type.
–“DIM-OFF” (
z): to
deactivate the dimmer.
2 Press (SEL) repeatedly until “LOW,”
1
“MID” or “HI” appears.
DEMO*
To set “DEMO-ON” (z) or
(Demonstration)
“DEMO-OFF” (page 4).
3 Press the volume +/– button
repeatedly to adjust the selected item.
A.SCRL
To scroll long displayed items
The volume level is adjustable in 1 dB steps,
(Auto Scroll)
automatically when the group/
from –10 dB to +10 dB.
track is changed.
–“A.SCRL-ON”: to scroll.
–“A.SCRL-OFF” (
z): to not
scroll.
Repeat steps 2 and 3 to adjust the equalizer
curve.
continue to next page t
To restore the factory-set equalizer curve,
press and hold (SEL) before the setting is
complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
9
mode.
2
Changing the operative direction
LPF*
(Low
To select the cut-off frequency
The operative direction of the controls is factory-
Pass Filter)
“78HZ,” “125HZ” or “OFF”
set as shown below.
(
z).
*1 When the unit is turned off.
To increase
*2 When the audio output is set to “SUB.”
Using optional equipment
To decrease
If you need to mount the rotary commander on
the right hand side of the steering column, you
Rotary commander RM-X4S
can reverse the operative direction.
(CDX-R3350EE only)
1 While pushing the VOL control, press and
hold (SEL).
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
S
E
L
D
S
P
L
MODE
M
O
D
E
DSPL
S
E
L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
ATT
SEL
PRESET
MODE
SOURCE
OFF
DSPL
VOL
SEEK/AMS
OFF
The following controls on the rotary commander
require a different operation from the unit.
• PRESET/DISC control
To select preset stations; control CD, the same
as (1)/(2) –/+ on the unit (push in and rotate).
• VOL control
The same as the volume +/– button on the unit
(rotate).
• SEEK/AMS control
The same as (SEEK) +/– on the unit (rotate, or
rotate and hold).
10
• Before playing, clean the
Additional Information
discs with a commercially
available cleaning cloth. Wipe
Precautions
each disc from the centre out.
Do not use solvents such as
benzine, thinner,
• If your car has been parked in direct sunlight,
commercially available
allow the unit to cool off before operating it.
cleaners, or antistatic spray
• Power aerial will extend automatically while
intended for analogue discs.
the unit is operating.
Notes on CD-R/CD-RW discs
Moisture condensation
• Some CD-Rs/CD-RWs (depending on the
On a rainy day or in a very damp area, moisture
equipment used for its recording or the
condensation may occur inside the lenses and
condition of the disc) may not play on this unit.
display of the unit. Should this occur, the unit
• You cannot play a CD-R/a CD-RW that is not
will not operate properly. In such a case, remove
finalized.
the disc and wait for about an hour until the
moisture has evaporated.
Music discs encoded with copyright
To maintain high sound quality
protection technologies
Be careful not to splash juice or other soft drinks
This product is designed to play back discs that
onto the unit or discs.
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
Notes on discs
among those discs, there are some that do not
• To keep a disc clean, do not touch its surface.
conform to the CD standard and may not be
Handle the disc by its edge.
playable by this product.
• Keep your discs in their cases or disc
magazines when not in use.
Note on DualDiscs
• Do not subject discs to heat/high temperature.
A DualDisc is a two sided disc product which
Avoid leaving them in a parked car or on a
mates DVD recorded material on one side with
dashboard/rear tray.
digital audio material on the other side. However,
• Do not attach labels, or use discs with sticky
since the audio material side does not conform to
ink/residue. Such discs may stop spinning
the Compact Disc (CD) standard, playback on this
when used, causing a malfunction, or may ruin
product is not guaranteed.
the disc.
About MP3 files
MP3, which stands for MPEG-1 Audio Layer-3,
is a music file compression format standard. It
compresses audio CD data to approximately 1/10
of its original size.
• Do not use any discs with labels or stickers
• The unit is compatible with the ISO 9660 level
attached.
1/level 2 format, Joliet/Romeo in the expansion
The following malfunctions may result from
format, ID3 tag version 1.0, 1.1, 2.2, 2.3 and
using such discs:
2.4, and Multi Session.
–Inability to eject a disc (due to a label or
• The maximum number of:
sticker peeling off and jamming the eject
–folders (groups): 150 (including root and
mechanism).
empty folders).
–Inability to read audio data correctly (e.g.,
–MP3 files (tracks) and folders contained in a
playback skipping, or no playback) due to
disc: 300 (if a folder/file names contain many
heat shrinking of a sticker or label causing a
characters, this number may become less than
disc to warp.
300).
• Discs with non-standard shapes (e.g., heart,
–displayable characters for a folder/file name
square, star) cannot be played on this unit.
is 32 (Joliet), or 32/64 (Romeo); ID3 tag is
Attempting to do so may damage the unit. Do
15/30 characters (1.0, 1.1, 2.2 and 2.3), or 63/
not use such discs.
126 characters (2.4).
• You cannot play 8 cm CDs.
continue to next page t
11
Playback order of MP3 files
Note
Be sure to create the ATRAC CD using authorized
Folder
MP3
software, such as SonicStage 2.0 or later, or
(group)
SonicStage Simple Burner 1.0 or 1.1, which are
supplied with Sony Network products.
MP3 file
(track)
If you have any questions or problems
concerning your unit that are not covered in this
manual, consult your nearest Sony dealer.
Maintenance
Replacing the lithium battery of the
card remote commander
Under normal conditions, the battery will last
Notes
approximately 1 year. (The service life may be
• Be sure to finalize the disc before using on the unit.
shorter, depending on the conditions of use.)
• When naming an MP3 file, be sure to add the file
When the battery becomes weak, the range of the
expansion “.mp3” to the file name.
card remote commander becomes shorter.
• If you play a high-bit-rate MP3, such as 320 kbps,
Replace the battery with a new CR2025 lithium
sound may be intermittent.
battery. Use of any other battery may present a
• During playback of a VBR (variable bit rate) MP3 file
risk of fire or explosion.
or fast-forward/reverse, elapsed playing time may
not display accurately.
• When the disc is recorded in Multi Session, only the
first track of the first session format is recognized
and played (any other format is skipped). The
priority of the format is CD-DA, ATRAC CD and
MP3.
– When the first track is a CD-DA, only CD-DA of the
first session is played.
– When the first track is not a CD-DA, an ATRAC CD
Notes on the lithium battery
or MP3 session is played. If the disc has no data in
• Keep the lithium battery out of the reach of children.
any of these formats, “NO MUSIC” is displayed.
Should the battery be swallowed, immediately
consult a doctor.
• Wipe the battery with a dry cloth to assure a good
contact.
About ATRAC CD
• Be sure to observe the correct polarity when
installing the battery.
ATRAC3plus format
• Do not hold the battery with metallic tweezers,
ATRAC3, which stands for Adaptive Transform
otherwise a short-circuit may occur.
Acoustic Coding3, is audio compression
technology. It compresses audio CD data to
approximately 1/10 of its original size.
ATRAC3plus, which is an extended format of
ATRAC3, compresses the audio CD data to
approximately 1/20 of its original size. The unit
accepts both ATRAC3 and ATRAC3plus format.
ATRAC CD
Fuse replacement
ATRAC CD is recorded audio CD data which is
When replacing the fuse, be
compressed to ATRAC3 or ATRAC3plus format
sure to use one matching the
using authorized software, such as SonicStage
amperage rating stated on the
2.0 or later, or SonicStage Simple Burner.
original fuse. If the fuse
• The maximum number of:
blows, check the power
–folders (groups): 255
connection and replace the
–files (tracks): 999
fuse. If the fuse blows again
• The characters for a folder/file name and text
after replacement, there may
information written by SonicStage is displayed.
be an internal malfunction. In
such a case, consult your
For details on ATRAC CD, see the SonicStage or
nearest Sony dealer.
SonicStage Simple Burner manual.
12
1
+ side up
2
c
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
Fuse (10A)
Cleaning the connectors
2 Pull the release keys to unseat the unit.
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 4) and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the connectors
may be damaged.
3 Slide the unit out of the mounting.
Main unit Back of the front panel
Notes
Specifications
• For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
CD Player section
switch.
• Never touch the connectors directly with your fingers
Signal-to-noise ratio: 120 dB
or with any metal device.
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Tuner section
Removing the unit
FM
1 Remove the protection collar.
Tuning range:
FM1/FM2: 87.5 – 108.0 MHz (at 50 kHz step)
1 Detach the front panel (page 4).
FM3: 65 – 74 MHz (at 30 kHz step)
Aerial terminal: External aerial connector
2 Engage the release keys together with the
Intermediate frequency: 10.7 MHz/450 kHz
protection collar.
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),
0.3 % (mono)
Separation: 35 dB at 1 kHz
Frequency response: 30 – 15,000 Hz
AM
Orient the release
Tuning range:
keys as shown.
531 – 1,602 kHz
Aerial terminal: External aerial connector
3 Pull out the release keys to remove the
Intermediate frequency: 10.7 MHz/450 kHz
protection collar.
Sensitivity: 30 µV
Power amplifier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 50 W × 4 (at 4 ohms)
General
Outputs:
2 Remove the unit.
Audio outputs terminal (sub/rear switchable)
Power aerial relay control terminal
1 Insert both release keys simultaneously
Power amplifier control terminal
until they click.
Inputs:
Telephone ATT control terminal
Remote controller input terminal
Aerial input terminal
Hook facing
inwards.
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
continue to next page t
13
Power requirements: 12 V DC car battery
No beep sound.
(negative earth)
• The beep sound is cancelled (page 9).
Dimensions: Approx. 178 × 50 × 179 mm (w/h/d)
• An optional power amplifier is connected and
Mounting dimensions: Approx. 182 × 53 × 161 mm
(w/h/d)
you are not using the built-in amplifier.
Mass: Approx. 1.2 kg
The contents of the memory have been
Supplied accessories:
erased.
Card remote commander: RM-X151
• The RESET button has been pressed.
Parts for installation and connections (1 set)
t Store again into the memory.
Optional accessory:
Rotary commander RM-X4S (CDX-R3350EE
• The power connecting lead or battery has been
only)
disconnected.
• The power connecting lead is not connected
US and foreign patents licensed from Dolby
properly.
Laboratories.
Stored stations and correct time are erased.
The fuse has blown.
MPEG Layer-3 audio coding technology and
Makes noise when the position of the
patents licensed from Fraunhofer IIS and
ignition key is switched.
Thomson.
The leads are not matched correctly with the
Design and specifications are subject to change
car’s accessory power connector.
without notice.
The display disappears from/does not
appear in the display window.
• The dimmer is set “DIM-ON” (page 9).
• The display disappears if you press and hold
(OFF).
• Lead-free solder is used for soldering certain parts.
t Press and hold (OFF) again until the
(more than 80 %)
• Halogenated flame retardants are not used in the
display appears.
certain printed wiring boards.
• The connectors are dirty (page 13).
• Halogenated flame retardants are not used in
cabinets.
• VOC (Volatile Organic Compound)-free vegetable oil
CD playback
based ink is used for printing the carton.
The disc is automatically ejected.
• Packaging cushions do not use polystyrene foam.
The disc has trouble.
t Check the following:
The disc cannot be loaded.
Troubleshooting
• Another disc is already loaded.
• The disc has been forcibly inserted upside
The following checklist will help you remedy
down or in the wrong way.
problems you may encounter with your unit.
Before going through the checklist below, check
The disc does not playback.
the connection and operating procedures.
• Defective or dirty disc.
• The CD-Rs/CD-RWs are not for audio use
(page 11).
General
MP3 files cannot be played back.
No power is being supplied to the unit.
The disc is not corresponding to the MP3 format
• Check the connection. If everything is in order,
and version (page 11).
check the fuse.
• If the unit is turned off and the display
MP3 files take longer to play back than
disappears, it cannot be operated with the
others.
remote commander.
The following discs take a longer time to start
t Turn on the unit.
playback.
–a disc recorded with a complicated tree
The power aerial does not extend.
structure.
The power aerial does not have a relay box.
–a disc recorded in Multi Session.
No sound.
–a disc to which data can be added.
• The volume is too low.
The ATRAC CD cannot play.
• The ATT function is activated, or the Telephone
• The disc is not created by authorized software,
ATT function (when the interface cable of a car
such as SonicStage or SonicStage Simple
telephone is connected to the ATT lead) is
Burner.
activated.
• Tracks that are not included in the group cannot
• The position of the fader control (FAD) is not
be played.
set for a 2-speaker system.
14
The display items do not scroll.
Error displays/Messages
• For discs with very many characters, those may
not scroll.
• “A.SCRL” is set to off.
ERROR
t Set “A.SCRL-ON” (page 9).
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
The sound skips.
• The disc cannot play because of some problem.
• Installation is not correct.
t Insert another disc.
t Install the unit at an angle of less than 45° in
a sturdy part of the car.
FAILURE
• Defective or dirty disc.
The speaker/amplifier connection is incorrect.
t See the supplied installation/connections
The operation buttons do not function.
manual to check the connection.
The disc will not eject.
Press the RESET button (page 4).
L.SEEK +/–
The local seek mode is on during automatic
tuning.
Radio reception
NO ID3
The stations cannot be received.
ID3 tag information is not written in the MP3
The sound is hampered by noises.
file.
• Connect a power aerial control lead (blue) or
NO INFO
accessory power supply lead (red) to the power
Text information is not written in the ATRAC3/
supply lead of a car’s aerial booster (only when
ATRAC3plus file.
your car has built-in FM/AM aerial in the rear/
side glass).
NO MUSIC
• Check the connection of the car aerial.
The disc is not a music file.
• The auto aerial will not go up.
t Insert a music CD.
t Check the connection of the power aerial
NO NAME
control lead.
A track/group/disc name is not written in the
• Check the frequency.
track.
Preset tuning is not possible.
OFFSET
• Store the correct frequency in the memory.
There may be an internal malfunction.
• The broadcast signal is too weak.
t Check the connection. If the error indication
Automatic tuning is not possible.
remains on in the display, consult your
• Setting of the local seek mode is not correct.
nearest Sony dealer.
t Tuning stops too frequently:
READ
Press (SEN S) until “LOCAL-ON” appears.
The unit is reading all track and group
t Tuning does not stop at a station:
information on the disc.
Press (SENS) repeatedly until “MONO-
t Wait until reading is complete and playback
ON” or “MONO-OFF” (FM), or “LOCAL-
starts automatically. Depending on the disc
OFF” (AM) appears.
structure, it may take more than a minute.
• The broadcast signal is too weak.
RESET
t Perform manual tuning.
The unit cannot be operated because of some
During FM reception, the “ST” indication
problem.
flashes.
t Press the RESET button (page 4).
• Tune in the frequency accurately.
“” or “”
• The broadcast signal is too weak.
During fast-forward or reverse, you have reached
t Press (SENS) to set the monaural reception
the beginning or the end of the disc and you
mode to “MONO-ON.”
cannot go any further.
An FM programme broadcast in stereo is
“”
heard in monaural.
The character cannot be displayed with the unit.
The unit is in monaural reception mode.
t Press (SENS) until “MONO-OFF” appears.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.
15
Поздравляем с
покупкой!
Благодарим Вас за то, что Вы остановили
свой выбор на проигрывателе компакт-
дисков Sony. В поездке Вы сможете
использовать следующие функции
проигрывателя.
• Воспроизведение компакт-дисков.
Можно воспроизводить диски CD-DA
(содержащие также CD TEXT*), CD-R/
CD-RW (с файлами MP3 и диски в
формате Multi Session (стр. 13 )), а также
диски ATRAC CD (форматы ATRAC3 и
ATRAC3plus (стр. 13 )).
Тип диска Метка на компакт-диске
CD-DA
MP3
ATRAC C D
• Прием радиопрограмм.
– Можно хранить в памяти до 6 станций в
каждом диапазоне (FM1, FM2, FM3,
AM1 и AM2).
– Функция BTM (Память оптимальной
настройки): устройство выбирает
радиостанции с наиболее сильным
сигналом и сохраняет их в памяти.
* Компакт-диск с CD TEXT - это компакт-диск CD-
DA, содержащий такую информацию, как
SonicStage и ее логотип являются
название компакт-диска, имя исполнителя и
товарными знаками корпорации Sony.
названия композиций.
ATRAC, ATRAC3, ATRAC3plus и их
логотипы являются товарными знаками
Проигрыватель компакт-
корпорации Sony.
дисков с диапазоном FM/AM
Сдепано в Таиланде
2
Содержание
Начало работы
Другие функции
Сброс параметров устройства . . . . . . . . . . 4
Изменение настроек звука . . . . . . . . . . . . . 9
Установка часов . . . . . . . . . . . . . . . . . . . . . . 4
Подстройка характеристик звука
Режим DEMO . . . . . . . . . . . . . . . . . . . . . . . . 4
— BAL/FAD/SUB . . . . . . . . . . . . . . . . . . 9
Снятие передней панели . . . . . . . . . . . . . . . 4
Настройка кривой эквалайзера
Установка передней панели . . . . . . . . . 5
— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Установка компакт-диска в
Настройка параметров установки
устройство. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
— SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Извлечение компакт-диска . . . . . . . . . . 5
Использование дополнительного
оборудования. . . . . . . . . . . . . . . . . . . . . . . . 11
Поворотный дистанционный
Расположение органов
переключатель RM-X4S . . . . . . . . . . . 11
управления и основные
Дополнительная информация
операции
Меры предосторожности . . . . . . . . . . . . . 12
Основное устройство . . . . . . . . . . . . . . . 6
Примечания относительно
Пульт дистанционного управления
компакт-дисков . . . . . . . . . . . . . . . . . . . 12
RM-X151 . . . . . . . . . . . . . . . . . . . . . . . . . . 6
О файлах MP3 . . . . . . . . . . . . . . . . . . . . 13
О компакт-дисках ATRAC CD . . . . . 13
Компакт-диск
Уход за устройством . . . . . . . . . . . . . . . . . 14
Извлечение устройства . . . . . . . . . . . . . . . 15
Индикация на дисплее . . . . . . . . . . . . . . 8
Технические характеристики. . . . . . . . . . 15
Повторное и перетасованное
Поиск и устранение неисправностей . . . 16
воспроизведение . . . . . . . . . . . . . . . . . . . 8
Индикация/сообщения об
ошибках . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Радиоприемник
Сохранение и прием радиостанций . . . . . . 8
Автоматическое сохранение — BTM
(Память оптимальной настройки) . . . . 8
Сохранение вручную . . . . . . . . . . . . . . . 8
Прием радиостанций, сохраненных в
памяти . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Автоматическая настройка . . . . . . . . . . 9
3
Начало работы
Режим DEMO
Сброс параметров
При выключении устройства сначала
отобразится индикация времени, а затем
устройства
на дисплее появится демонстрационное
изображение (режим демонстрации
Перед первым включением устройства
(DEMO)).
или после замены автомобильного
аккумулятора, а также после изменения
Для отмены режима DEMO выключите
схемы подключения следует сбросить
устройство и выберите в установках
параметры устройства.
(стр. 10) параметр “DEMO-OFF”.
Снимите переднюю панель и нажмите
кнопку RESET с помощью заостренного
предмета, например шариковой ручки.
Снятие передней
панели
Кнопка
RESET
Во избежание кражи устройства можно
снять с него переднюю панель.
Примечание
При нажатии кнопки RESET выполняется
Предупреждающий сигнал
стирание установок времени и некоторых других
Если до поворота ключа зажигания в
занесенных в память параметров.
положение OFF с устройства не была
снята передняя панель, то в течение
нескольких секунд будет слышен
Установка часов
предупредительный звуковой сигнал.
Звуковой сигнал будет слышен только в
Часы данного устройства имеют
том случае, если используется встроенный
24-часовую индикацию.
усилитель.
1 Нажмите и удерживайте кнопку
1 Нажмите кнопку (OFF).
(SEL).
Устройство выключится.
Отобразится дисплей установок.
2 Нажмите кнопку , затем снимите
2 Нажимайте кнопку (SEL), пока не
панель, потянув ее на себя.
появится индикация “CLOCK-ADJ”.
3 Нажмите кнопку (DSPL).
(OFF)
Начнет мигать индикация часа.
4 Нажмите кнопку регулировки
громкости +/– для установки
значений часа и минут.
Чтобы переместить индикацию,
нажмите кнопку (DSPL).
5 Нажмите кнопку (SEL).
Примечания
Часы начнут отсчет времени, и
• Старайтесь не ронять переднюю панель. Не
появится следующий дисплей
надавливайте слишком сильно на переднюю
установок.
панель и окошко дисплея.
• Не подвергайте переднюю панель воздействию
6 Нажмите и удерживайте кнопку
тепла/высокой температуры или влажности.
(SEL).
Старайтесь не оставлять его в припаркованной
Установка завершена.
машине или на приборной доске/полочке за
задним сиденьем.
Чтобы отобразить часы, нажмите кнопку
(DSPL). Нажмите кнопку (DSPL) еще раз,
Совет
При переноске передней панели поместите ее в
чтобы вернуться к предыдущей индикации
прилагаемый специальный футляр.
дисплея.
При использовании пульта дистанционного
управления
Для установки значений часа и минут в шаге
4 нажмите кнопку M или m.
4
Установка передней панели
Извлечение компакт-диска
Прикрепите часть A передней панели к
1
Откройте заслонку.
части B устройства, как показано на
рисунке, и установите левую сторону на
место до щелчка.
x
A
B
2 Нажмите на заслонку до
Примечание
возникновения щелчка.
Не ставьте ничего на внутреннюю поверхность
передней панели.
Щелчок
Установка компакт-
диска в устройство
1 Откройте заслонку.
x
2 Вставьте компакт-диск этикеткой
вверх.
Компакт-диск будет извлечен.
Примечания
• Не закрывайте заслонку при установке или
извлечении компакт-диска. Компакт-диск может
застрять и получить повреждения.
• Если при открытии заслонки прилагать
чрезмерные усилия, компакт-диск может быть
извлечен автоматически.
Начнется воспроизведение.
Совет
3 Закройте заслонку.
Компакт-диск можно воспроизводить как при
закрытой, так и при открытой заслонке.
5
Расположение органов управления и основные операции
Основное устройство
12 3 4 5 6 7 8
ATT OFF
OPEN
SEEK
SEEK
DSPL
EQ3
DIM
–
GP/DISC
+
REP
SHUF
SOURCE MODE
SEL
123456
SENS
BTMSCRL
CDX-R3350EE
CDX-R33EE
9 0 qaqs qd qf qg qh qj qk
Пульт дистанционного управления RM-X151
7
2
OFF
ATT
qs
0
SOURCE
SEL
MODE
qa
ql
+
wa
–
3
DSPL
SCRL
qh
132
ws
465
+
VOL
w;
–
6
- 1
- 2
