Sony CDX-GT300EE: инструкция
Раздел: Авто, мото оборудование и транспорт
Тип: Автомагнитола
Характеристики, спецификации
Инструкция к Автомагнитоле Sony CDX-GT300EE
2-653-153-43 (1)
FM
/
AM
Compact Disc Player
GB
Operating Instructions
RU
Инструкция по эксплуатации
To cancel the demonstration (DEMO) display, see page 10.
Для отмены демонстрации на дисплее (режим DEMO) см. стр. 11.
CDX-GT300EE
© 2005 Sony Corporation
Welcome !
Warning if your car’s ignition has no
ACC position
Thank you for purchasing this Sony Compact
After turning the ignition off, be sure to press
Disc Player. You can enjoy your drive with the
and hold (OFF) on the unit until the display
following functions.
disappears.
• CD playback
Otherwise, the display does not turn off and
You can play CD-DA (also containing CD
this causes battery drain.
TEXT*), CD-R/CD-RW (MP3/WMA files also
containing Multi Session (page 12)) and
ATRAC CD (ATRAC3 and ATRAC3plus
format (page 13)).
Type of discs Label on the disc
This label is located on the bottom of the
CD-DA
chassis.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
MP3
the European Union and other
WMA
European countries with separate
ATRAC CD
collection systems)
This symbol on the product or on its
packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the
• Radio reception
applicable collection point for the recycling of electrical
– You can store up to 6 stations per band (FM1,
and electronic equipment. By ensuring this product is
FM2, FM3, AM1 and AM2).
disposed of correctly, you will help prevent potential
– BTM (Best Tuning Memory): the unit selects
negative consequences for the environment and human
strong signal stations and stores them.
health, which could otherwise be caused by inappropriate
• Sound adjustment
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
– EQ3 stage2: You can choose any one of 7
information about recycling of this product, please contact
preset equalizer curves.
your local Civic Office, your household waste disposal
– DSO (Dynamic Soundstage Organizer):
service or the shop where you purchased the product.
creates a more ambient sound field, using
Applicable accessory: Remote commander
virtual speaker synthesis, to enhance the
sound of speakers, even if they are installed
low in the door.
– BBE MP: improves digitally compressed
sound such as MP3.
• Optional unit operation
You can also control optional CD/MD
changers.
• Auxiliary equipment connection
An AUX input jack on the front of the unit
allows connection of a portable audio device.
* A CD TEXT disc is a CD-DA that includes
information such as disc, artist and track name.
For installation and connections, see the
supplied installation/connections manual.
2
Table of Contents
Getting Started
Other functions
Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4
Changing the sound settings . . . . . . . . . . . . . . . 9
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjusting the sound characteristics
Detaching the front panel . . . . . . . . . . . . . . . . . 4
— BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . . 9
Attaching the front panel . . . . . . . . . . . . . . . 5
Customizing the equalizer curve
Inserting the disc in the unit . . . . . . . . . . . . . . . 5
— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 5
Adjusting setup items — SET . . . . . . . . . . . . . 9
Using optional equipment. . . . . . . . . . . . . . . . 10
Auxiliary audio equipment. . . . . . . . . . . . . 10
Location of controls and basic
CD/MD changer . . . . . . . . . . . . . . . . . . . . . 10
operations
Rotary commander RM-X4S . . . . . . . . . . . 11
Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Card remote commander RM-X151 . . . . . . . 6
Additional Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CD
Notes on discs . . . . . . . . . . . . . . . . . . . . . . 12
About MP3/WMA files . . . . . . . . . . . . . . . 12
Display items . . . . . . . . . . . . . . . . . . . . . . . . 8
About ATRAC CD. . . . . . . . . . . . . . . . . . . 13
Repeat and shuffle play. . . . . . . . . . . . . . . . . 8
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Removing the unit. . . . . . . . . . . . . . . . . . . . . . 14
Radio
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 16
Storing and receiving stations . . . . . . . . . . . . . . 8
Error displays/Messages. . . . . . . . . . . . . . . 17
Storing automatically — BTM . . . . . . . . . . . 8
Storing manually. . . . . . . . . . . . . . . . . . . . . . 8
Receiving the stored stations . . . . . . . . . . . . 8
Tuning automatically . . . . . . . . . . . . . . . . . . 8
Manufactured under license
Microsoft, Windows Media,
R
from BBE Sound, Inc.
and the Windows logo are
The BBE MP process
trademarks or registered
improves digitally compressed sound, such as
trademarks of Microsoft
MP3, by restoring and enhancing the higher
Corporation in the United States and/or other
harmonics lost through compression. BBE MP
countries.
works by generating even-order harmonics from
the source material, effectively recovering
warmth, detail and nuance.
SonicStage and its logo are trademarks of Sony
Corporation.
ATRAC, ATRAC3, ATRAC3plus and their logos
are trademarks of Sony Corporation.
3
Getting Started
Detaching the front panel
You can detach the front panel of this unit to
Resetting the unit
prevent theft.
Before operating the unit for the first time, or
after replacing the car battery or changing the
Caution alarm
connections, you must reset the unit.
If you turn the ignition switch to the OFF
Detach the front panel and press the RESET
position without detaching the front panel, the
button with a pointed object, such as a ballpoint
caution alarm will sound for a few seconds.
pen.
The alarm will only sound if the built-in
amplifier is used.
1 Press (OFF).
RESET
The unit is turned off.
button
2 Press (OPEN).
The front panel is flipped down.
Note
Pressing the RESET button will erase the clock setting
3 Slide the front panel to the right, then
and some stored contents.
gently pull out the left end of the front
panel.
Setting the clock
The clock uses a 24-hour digital indication.
1 Press and hold the select button.
The setup display appears.
1
2 Press the select button repeatedly
2
until “CLOCK-ADJ” appears.
3 Press (DSPL ) .
Notes
The hour indication flashes.
• Do not drop or put excessive pressure on the front
4 Rotate the volume control dial to set
panel and display window.
the hour and minute.
• Do not subject the front panel to heat/high
To move the digital indication, press (DSPL).
temperature or moisture. Avoid leaving it in a parked
car or on a dashboard/rear tray.
5 Press the select button.
The setup is complete and the clock starts.
To display the clock, press (DSPL). Press
(DSPL) again to return to the previous display.
With the card remote commander
In step 4, to set the hour and minute, press M or m.
4
Attaching the front panel
Inserting the disc in the unit
Place the hole A of the front panel onto the
spindle B on the unit, then lightly push the left
1 Press (OPEN).
side in.
2 Insert the disc (label side up).
Press (SOURCE) on the unit (or insert a disc) to
operate the unit.
A
B
3 Close the front panel.
Playback starts automatically.
Ejecting the disc
1 Press (OPEN).
2 Press Z.
The disc is ejected.
x
3 Close the front panel.
Note
Do not put anything on the inner surface of the front
panel.
5
Location of controls and basic operations
Main unit
CDX-GT300EE
Front panel removed
ql w;qk
RESET
Card remote commander
Refer to the pages listed for details. The
corresponding buttons on the card remote
RM-X151
commander control the same functions as those
on the unit.
1
wd
OFF
ATT
A OFF button
wf
To power off; stop the source.
qs
SOURCE
SEL
MODE
qd
B Volume control dial/select button 9
wa
To adjust volume (rotate); select setup items
+
(press and rotate).
wg
C Receptor for the card remote
commander
–
q;
DSPL
SCRL
qf
D BTM button 8
To start the BTM function (press and hold).
132
wh
E Display window
465
F DSO button 2
+
To select the DSO mode (1, 2, 3 or OFF).
VOL
ws
The larger the number, the more enhanced
–
the effect.
G OPEN button 5
6
1
2
3
H GP*
/ALBM*
+/– buttons*
T Disc slot 5
To skip groups/albums (press); skip groups/
To insert the disc.
albums continuously (press and hold).
The following buttons on the card remote
I SEEK –/+ buttons
commander have also different buttons/functions
CD:
from the unit.
To skip tracks (press); skip tracks
wa < (.)/, (>) buttons
continuously (press, then press again within
To control CD/radio, the same as (SEEK)
about 1 second and hold); reverse/fast-
–/+ on the unit.
forward a track (press and hold).
Radio:
ws VOL (volume) +/– button
To tune in stations automatically (press); find
To adjust volume.
a station manually (press and hold).
wd ATT (attenuate) button
J DSPL (display) button 8
To attenuate the sound. To cancel, press
To change display items.
again.
K SENS button
wf SEL (select) button
To improve weak reception: LOCAL/
The same as the select button on the unit.
MONO.
wg M (+)/m (–) buttons
L SOURCE button
To control CD, the same as
To power on; change the source (Radio/CD/
(GP/ALBM) +/– on the unit.
4
MD*
/AUX).
wh Number buttons
M MODE button 8, 10
To receive stored stations (press); store
To select the radio band (FM/AM)/select the
stations (press and hold).
5
unit*
.
*1 When an ATRAC CD is played.
N SCRL (scroll) button 8
*2 When an MP3/WMA is played.
*3 If the changer is connected, the operation is
To scroll the display item.
different, see page 10.
O Number buttons
*4 When an MD changer is connected.
4
*5 When a CD/MD changer is connected.
CD/MD*
:
*6 When playing back on this unit.
(3): REP 8
(4): SHUF 8
Note
6
(5): BBE MP*
3
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
To activate the BBE MP function, set
unless (SOURCE) on the unit is pressed, or a disc is
“BBEMP-ON.” To cancel, set
inserted to activate the unit first.
“BBEMP-OFF.”
6
(6): PAUSE*
Tip
For details on how to replace the battery, see
To pause playback. To cancel, press
“Replacing the lithium battery of the card remote
again.
commander” on page 13.
Radio:
To receive stored stations (press); store
stations (press and hold).
P EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
Q AUX input jack 10
To connect a portable audio device.
R RESET button 4
S Z (eject) button 5
To eject the disc.
7
CD
Radio
For details on selecting a CD/MD changer, see
Storing and receiving stations
page 10.
Caution
Display items
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1 Press (SOURCE) repeatedly until
“TUNER” appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3*, AM1 or AM2.
A ATRAC CD indication
B Source
2 Press and hold (BTM) until “BTM”
C WMA/MP3/BBE MP indication
flashes.
D Track number/Elapsed playing time, Disc/
The unit stores stations in order of frequency
1
artist name, Album/group number*
, Album/
on the number buttons.
2
group name, Track name, Text information*
,
A beep sounds when the setting is stored.
Clock
* FM3 tuning range is 65 to 74 MHz (at 30KHz step).
*1 Album/group number is displayed only when the
album/group is changed.
Storing manually
*2 When playing an MP3, ID3 tag is displayed, when
playing ATRAC CD, text information written by
1 While receiving the station that you
SonicStage, etc., is displayed, and when playing
WMA, WMA tag is displayed.
want to store, press and hold a
number button ((1) to (6)) until
To change display items D, press (DSPL);
“MEM” appears.
scroll display items D, press (SCRL) or set
The number button indication appears in the
“A.SCRL-ON” (page 10).
display.
Tip
Note
Displayed items will differ, depending on the disc type,
If you try to store another station on the same number
recorded format and settings. For details on MP3/
button, the previously stored station will be replaced.
WMA, see page 12; ATRAC CD, see page 13.
Receiving the stored stations
Repeat and shuffle play
1 Select the band, then press a number
1 During playback, press (3) (REP) or
button ((1) to (6)).
(4) (SHUF) repeatedly until the
desired setting appears.
Tuning automatically
Select To play
1 Select the band, then press (SEEK) –/+
REP-TRACK track repeatedly.
to search for the station.
1
REP-ALBM*
album repeatedly.
Scanning stops when the unit receives a
2
station. Repeat this procedure until the
REP-GP*
group repeatedly.
desired station is received.
1
SHUF-ALBM*
album in random order.
Tip
2
SHUF-GP*
group in random order.
If you know the frequency of the station you want to
listen to, press and hold (SEEK) –/+ to locate the
SHUF-DISC disc in random order.
approximate frequency, then press (SEEK) –/+
repeatedly to fine adjust to the desired frequency
*1 When an MP3/WMA is played.
(manual tuning).
*2 When an ATRAC CD is played.
To return to normal play mode, select “REP-
OFF” or “SHUF-OFF.”
8
Tip
Other functions
Other equalizer types are also adjustable.
With the card remote commander
Changing the sound settings
In step 3, to adjust the selected item, press <, M, ,
or m.
Adjusting the sound
Adjusting setup items — SET
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
1 Press and hold the select button.
volume.
The setup display appears.
1 Press the select button repeatedly
2 Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
until the desired item appears.
The item changes as follows:
3 Rotate the volume control dial to
1
1
1
LOW*
t MID*
t HI*
t
select the setting (example “ON” or
BAL (left-right) t FAD (front-rear) t
“OFF”).
2
3
SUB (subwoofer volume)*
t AUX*
4 Press and hold the select button.
*1 When EQ3 is activated (page 9).
The setup is complete and the display returns
*2 When the audio output is set to “SUB” (page 9).
to normal play/reception mode.
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
Note
*3 When AUX source is activated (page 10).
Displayed items will differ, depending on the source
and setting.
2 Rotate the volume control dial to
adjust the selected item.
With the card remote commander
After 3 seconds, the setting is complete and
In step 3, to select the setting, press < or ,.
the display returns to normal play/reception
The following items can be set (follow the page
mode.
reference for details):
With the card remote commander
“
z” indicates the default settings.
In step 2, to adjust the selected item, press <, M, ,
or m.
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
Customizing the equalizer curve
To set “BEEP-ON” (z) or “BEEP-OFF.”
— EQ3
1
AUX-A*
(AUX Audio)
“CUSTOM” of EQ3 allows you to make your
To turn the AUX source display “AUX-A-ON”
own equalizer settings.
(
z) or “AUX-A-OFF” (page 10).
1
1 Select a source, then press (EQ3)
SUB/REAR*
repeatedly to select “CUSTOM.”
To switch the audio output.
– “SUB-OUT” (
z): to output to a subwoofer.
2 Press the select button repeatedly
– “REAR-OUT”: to output to a power amplifier.
until “LOW,” “MID” or “HI” appears.
DIM (Dimmer)
3 Rotate the volume control dial to
To change the brightness of the display.
adjust the selected item.
–“DIM-AT” (
z): to dim the display
The volume level is adjustable in 1 dB steps,
automatically when you turn lights on.
from –10 dB to +10 dB.
– “DIM-ON”: to dim the display.
– “DIM-OFF”: to deactivate the dimmer.
CONTRAST
To adjust the contrast of the display.
The contrast level is adjustable in 7 steps.
2
M.DSPL*
(Motion Display)
Repeat steps 2 and 3 to adjust the equalizer
To select the Motion Display mode.
curve.
–“M.DSPL-SA” (
z): to show moving patterns
To restore the factory-set equalizer curve,
and spectrum analyser.
press and hold the select button before the
– “M.DSPL-ON”: to show moving patterns.
setting is complete.
– “M.DSPL-OFF”: to deactivate the Motion
After 3 seconds, the setting is complete and
Display.
the display returns to normal play/reception
mode.
continue to next page t
9
1
Adjust the volume level
DEMO*
(Demonstration)
To set “DEMO-ON” (z) or “DEMO-OFF.”
Be sure to adjust the volume for each connected
A.SCRL (Auto Scroll)
audio device before playback.
To scroll long displayed item automatically
1 Turn down the volume on the unit.
when the disc/group/track/album is changed.
2 Press (SOURCE) repeatedly until “AUX
– “A.SCRL-ON”: to scroll.
FRONT IN” appears.
– “A.SCRL-OFF” (
z): to not scroll.
3
3 Start playback of the portable audio device at a
LPF*
(Low Pass Filter)
moderate volume.
To select the subwoofer cut-off frequency: “LPF
OFF” (
z), “LPF125Hz” or “LPF 78Hz.”
4 Set your usual listening volume on the unit.
5 Press the select button repeatedly until “AUX”
*1 When the unit is turned off.
appears, and rotate the volume control dial to
*2 When the unit is turned on.
*3 When the audio output is set to “SUB.”
adjust the volume level.
CD/MD changer
Using optional equipment
Selecting the changer
Auxiliary audio equipment
1 Press (SOURCE) repeatedly until “CD” or
By connecting an optional portable audio device
“MD” appears.
to the AUX input jack (stereo mini jack) on the
2 Press (MODE) repeatedly until the desired
unit and then simply selecting the source, you
changer appears.
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
Unit number
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
Disc number
2 Turn down the volume on the unit.
Playback starts.
3 Connect to the unit.
.
Skipping albums and discs
1 During playback, press (GP/ALBM) +/–.
To skip Press (GP/ALBM)
album and release (hold for a
moment).
album
within 2 seconds of first
AUX
continuously
releasing.
discs repeatedly.
discs
then, press again within 2
continuously
seconds and hold.
Connecting cord*
(not supplied)
* Be sure to use a straight type plug.
10
Repeat and shuffle play
The following controls on the rotary commander
require a different operation from the unit.
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
• PRESET/DISC control
appears.
The same as (GP/ALBM) +/– on the unit (push
in and rotate).
Select To play
• VOL (volume) control
1
The same as the volume control dial on the unit
REP-DISC*
disc repeatedly.
(rotate).
SHUF-
tracks in the changer in random
• SEEK/AMS control
1
CHGR*
order.
The same as (SEEK) –/+ on the unit (rotate, or
2
rotate and hold).
SHUF-ALL*
tracks in all units in random
order.
Changing the operative direction
*1 When one or more CD/MD changers are
The operative direction of the controls is factory-
connected.
set as shown below.
*2 When one or more CD changers, or two or more
MD changers are connected.
To increase
To return to normal play mode, select “REP-
OFF” or “SHUF-OFF.”
Tip
“SHUF-ALL” will not shuffle tracks between CD units
To decrease
and MD changers.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Rotary commander RM-X4S
1 While pushing the VOL control, press and
Attaching the label
hold (SEL).
Attach the indication label depending on how
you mount the rotary commander.
SEL
D
S
P
L
M
O
D
E
M
O
D
E
D
SP
L
S
E
L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
ATT
SEL
PRESET/
DISC
MODE
SOURCE
OFF
DSPL
VOL
SEEK/AMS
OFF
11
• Before playing, clean the discs
Additional Information
with a commercially available
cleaning cloth. Wipe each disc
from the centre out. Do not use
Precautions
solvents such as benzine,
thinner, commercially available
• If your car has been parked in direct sunlight,
cleaners, or antistatic spray
allow the unit to cool off before operating it.
intended for analogue discs.
• Power aerial will extend automatically while the
unit is operating.
Notes on CD-R/CD-RW discs
• Some CD-Rs/CD-RWs (depending on the
Moisture condensation
equipment used for its recording or the condition
On a rainy day or in a very damp area, moisture
of the disc) may not play on this unit.
condensation may occur inside the lenses and
• You cannot play a CD-R/a CD-RW that is not
display of the unit. Should this occur, the unit will
finalized.
not operate properly. In such a case, remove the disc
and wait for about an hour until the moisture has
evaporated.
Music discs encoded with copyright
protection technologies
To maintain high sound quality
This product is designed to play back discs that
Be careful not to splash juice or other soft drinks
conform to the Compact Disc (CD) standard.
onto the unit or discs.
Recently, various music discs encoded with
copyright protection technologies are marketed by
some record companies. Please be aware that among
Notes on discs
those discs, there are some that do not conform to
• To keep a disc clean, do not touch its surface.
the CD standard and may not be playable by this
Handle the disc by its edge.
product.
• Keep your discs in their cases or disc magazines
when not in use.
Note on DualDiscs
• Do not subject discs to heat/high temperature.
A DualDisc is a two sided disc product which
Avoid leaving them in a parked car or on a
mates DVD recorded material on one side with
dashboard/rear tray.
digital audio material on the other side. However,
• Do not attach labels, or use discs with sticky ink/
since the audio material side does not conform to
residue. Such discs may stop spinning when used,
the Compact Disc (CD) standard, playback on this
causing a malfunction, or may ruin the disc.
product is not guaranteed.
About MP3/WMA files
MP3, which stands for MPEG-1 Audio Layer-3, is a
music file compression format standard. It
compresses audio CD data to approximately 1/10 of
its original size.
• Do not use any discs with labels or stickers
WMA, which stands for Windows Media Audio, is
attached.
another music file compression format standard. It
The following malfunctions may result from using
compresses audio CD data to approximately 1/22*
such discs:
of its original size.
– Inability to eject a disc (due to a label or sticker
* only for 64 kbps
peeling off and jamming the eject mechanism).
– Inability to read audio data correctly (e.g.,
• The unit is compatible with the ISO 9660 level 1/
playback skipping, or no playback) due to heat
level 2 format, Joliet/Romeo in the expansion
shrinking of a sticker or label causing a disc to
format, and Multi Session.
warp.
• The maximum number of:
• Discs with non-standard shapes (e.g., heart,
– folders (albums): 150 (including root and empty
square, star) cannot be played on this unit.
folders).
Attempting to do so may damage the unit. Do not
– MP3/WMA files (tracks) and folders contained
use such discs.
in a disc: 300 (if a folder/file names contain
• You cannot play 8 cm CDs.
many characters, this number may become less
than 300).
– displayable characters for a folder/file name is
32 (Joliet), or 64 (Romeo).
• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to
MP3 only. ID tag is 15/30 characters (1.0 and 1.1),
or 63/126 characters (2.2, 2.3 and 2.4). WMA tag
12
is 63 characters.
Playback order of MP3/WMA files
For details on ATRAC CD, see the SonicStage or
SonicStage Simple Burner manual.
Folder
MP3/WMA
(album)
Note
Be sure to create the ATRAC CD using authorized
MP3/WMA file
software, such as SonicStage 2.0 or later, or
(track)
SonicStage Simple Burner 1.0 or 1.1.
If you have any questions or problems concerning
your unit that are not covered in this manual, consult
your nearest Sony dealer.
Maintenance
Replacing the lithium battery of the
card remote commander
Notes
Under normal conditions, the battery will last
• When naming an MP3 file/WMA file, be sure to add
approximately 1 year. (The service life may be
the file extension “.mp3”/“.wma” to the file name.
• During playback of a VBR (variable bit rate) MP3/
shorter, depending on the conditions of use.)
WMA file or fast-forward/reverse, elapsed playing
When the battery becomes weak, the range of the
time may not display accurately.
card remote commander becomes shorter. Replace
• When the disc is recorded in Multi Session, only the
the battery with a new CR2025 lithium battery. Use
first track of the first session format is recognized
of any other battery may present a risk of fire or
and played (any other format is skipped). The
explosion.
priority of the format is CD-DA, ATRAC CD and
MP3/WMA.
+ side up
– When the first track is a CD-DA, only CD-DA of the
first session is played.
– When the first track is not a CD-DA, an ATRAC CD
2
c
or MP3/WMA session is played. If the disc has no
data in any of these formats, “NO MUSIC” is
displayed.
1
Notes on MP3
Notes on the lithium battery
• Be sure to finalize the disc before using on the unit.
• Keep the lithium battery out of the reach of children.
• If you play a high-bit-rate MP3, such as 320 kbps,
Should the battery be swallowed, immediately
sound may be intermittent.
consult a doctor.
Notes on WMA
• Wipe the battery with a dry cloth to assure a good
• Files made with lossless compression are not
contact.
playable.
• Be sure to observe the correct polarity when
• Files protected by copyright are not playable.
installing the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
About ATRAC CD
WARNING
ATRAC3plus format
ATRAC3, which stands for Adaptive Transform
Battery may explode if mistreated.
Acoustic Coding3, is audio compression
Do not recharge, disassemble, or dispose of
technology. It compresses audio CD data to
in fire.
approximately 1/10 of its original size.
ATRAC3plus, which is an extended format of
ATRAC3, compresses the audio CD data to
continue to next page t
approximately 1/20 of its original size. The unit
accepts both ATRAC3 and ATRAC3plus format.
ATRAC CD
ATRAC CD is recorded audio CD data which is
compressed to ATRAC3 or ATRAC3plus format
using authorized software, such as SonicStage 2.0 or
later, or SonicStage Simple Burner.
• The maximum number of:
– folders (groups): 255
– files (tracks): 999
• The characters for a folder/file name and text
information written by SonicStage is displayed.
13
Fuse replacement
When replacing the fuse, be
Removing the unit
sure to use one matching the
amperage rating stated on the
1 Remove the protection collar.
original fuse. If the fuse blows,
1Detach the front panel (page 4).
check the power connection and
replace the fuse. If the fuse
2Engage the release keys together with the
blows again after replacement,
protection collar.
there may be an internal
malfunction. In such a case,
Fuse (10A)
consult your nearest Sony
dealer.
Cleaning the connectors
The unit may not function properly if the connectors
between the unit and the front panel are not clean. In
Orient the release
keys as shown.
order to prevent this, detach the front panel (page 4)
and clean the connectors with a cotton swab dipped
3Pull out the release keys to remove the
in alcohol. Do not apply too much force. Otherwise,
protection collar.
the connectors may be damaged.
Main unit Back of the front
2 Remove the unit.
panel
1Insert both release keys simultaneously
Notes
until they click.
• For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
• Never touch the connectors directly with your fingers
Hook facing
or with any metal device.
inwards.
2Pull the release keys to unseat the unit.
3Slide the unit out of the mounting.
14
Optional accessories/equipment:
Specifications
Rotary commander: RM-X4S
BUS cable (supplied with an RCA pin cord):
RC-61 (1 m), RC-62 (2 m)
CD Player section
CD changer (10 discs): CDX-757MX
Signal-to-noise ratio: 120 dB
MD changer (6 discs): MDX-66XLP
Frequency response: 10 – 20,000 Hz
Source selector: XA-C30
Wow and flutter: Below measurable limit
AUX-IN selector: XA-300
Tuner section
Your dealer may not handle some of the above
listed accessories. Please ask the dealer for
FM
detailed information.
Tuning range:
FM1/FM2: 87.5 – 108.0 MHz (at 50 kHz step)
US and foreign patents licensed from Dolby
FM3: 65 – 74 MHz (at 30 kHz step)
Laboratories.
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
MPEG Layer-3 audio coding technology and
Usable sensitivity: 9 dBf
patents licensed from Fraunhofer IIS and
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Thomson.
Harmonic distortion at 1 kHz: 0.5 % (stereo),
Note
0.3 % (mono)
This unit cannot be connected to a digital preamplifier
Separation: 35 dB at 1 kHz
or an equalizer which is Sony BUS system compatible.
Frequency response: 30 – 15,000 Hz
AM
Design and specifications are subject to change
Tuning range:
without notice.
531 – 1,602 kHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: 30 µV
Power amplifier section
• Lead-free solder is used for soldering certain parts.
(more than 80 %)
Outputs: Speaker outputs (sure seal connectors)
• Halogenated flame retardants are not used in the
Speaker impedance: 4 – 8 ohms
certain printed wiring boards.
Maximum power output: 50 W × 4 (at 4 ohms)
• Halogenated flame retardants are not used in
cabinets.
General
• VOC (Volatile Organic Compound)-free vegetable
Outputs:
oil based ink is used for printing the carton.
Audio outputs terminal (front, sub/rear switchable)
• Packaging cushions do not use polystyrene foam.
Power aerial relay control terminal
Power amplifier control terminal
Inputs:
Telephone ATT control terminal
Illumination control terminal
BUS control input terminal
BUS audio input terminal
Remote controller input terminal
Aerial input terminal
AUX input jack
(stereo mini jack)
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
Power requirements: 12 V DC car battery
(negative earth)
Dimensions: Approx. 178 × 50 × 181 mm (w/h/d)
Mounting dimensions:
Approx. 182 × 53 × 162 mm (w/h/d)
Mass: Approx. 1.2 kg
Supplied accessories:
Card remote commander: RM-X151
Parts for installation and connections (1 set)
15
CD/MD playback
Troubleshooting
The disc cannot be loaded.
• Another disc is already loaded.
The following checklist will help you remedy
• The disc has been forcibly inserted upside down or in
problems you may encounter with your unit.
the wrong way.
Before going through the checklist below, check the
connection and operating procedures.
The disc does not playback.
• Defective or dirty disc.
• The CD-Rs/CD-RWs are not for audio use (page 12).
General
MP3/WMA files cannot be played back.
No power is being supplied to the unit.
The disc is incompatible with the MP3/WMA format
• Check the connection. If everything is in order, check
and version (page 12).
the fuse.
• If the unit is turned off and the display disappears, it
MP3/WMA files take longer to play back than
cannot be operated with the remote commander.
others.
tTurn on the unit.
The following discs take a longer time to start
playback.
The power aerial does not extend.
– a disc recorded with a complicated tree structure.
The power aerial does not have a relay box.
– a disc recorded in Multi Session.
No sound.
– a disc to which data can be added.
• The volume is too low.
The ATRAC CD cannot play.
• The ATT function is activated, or the Telephone ATT
• The disc is not created by authorized software, such
function (when the interface cable of a car telephone
as SonicStage or SonicStage Simple Burner.
is connected to the ATT lead) is activated.
• Tracks that are not included in the group cannot be
• The position of the fader control “FAD” is not set for
played.
a 2-speaker system.
• The CD changer is incompatible with the disc format
The display items do not scroll.
(MP3/WMA/ATRAC CD).
• For discs with very many characters, those may not
tPlay back with a Sony MP3 compatible CD
scroll.
changer, or this unit.
• “A.SCRL” is set to “OFF”.
t Set “A.SCRL-ON” (page 10) or press (SCRL).
No beep sound.
• The beep sound is cancelled (page 9).
The sound skips.
• An optional power amplifier is connected and you are
• Installation is not correct.
not using the built-in amplifier.
t Install the unit at an angle of less than 45° in a
sturdy part of the car.
The contents of the memory have been erased.
• Defective or dirty disc.
• The RESET button has been pressed.
tStore again into the memory.
The operation buttons do not function.
• The power connecting lead or battery has been
The disc will not eject.
disconnected.
Press the RESET button (page 4).
• The power connecting lead is not connected properly.
“MS” or “MD” does not appear on the source
Stored stations and correct time are erased.
display when both the optional MGS-X1 and
The fuse has blown.
MD changer are connected.
Makes noise when the position of the ignition
This unit recognizes MGS-X1 as an MD unit.
key is switched.
t Press (SOURCE) until “MS” or “MD” appears,
The leads are not matched correctly with the car’s
then press (MODE) repeatedly.
accessory power connector.
The display disappears from/does not appear
Radio reception
in the display window.
The stations cannot be received.
• The dimmer is set “DIM-ON” (page 9).
The sound is hampered by noises.
• The display disappears if you press and hold (OFF).
• Connect a power aerial control lead (blue) or
tPress and hold (OFF) on the unit until the
accessory power supply lead (red) to the power
display appears.
supply lead of a car’s aerial booster (only when your
• The connectors are dirty (page 14).
car has built-in FM/AM aerial in the rear/side glass).
DSO does not function.
• Check the connection of the car aerial.
Depending on the type of car interior or type of music,
• The auto aerial will not go up.
DSO may not have a desirable effect.
t Check the connection of the power aerial control
lead.
• Check the frequency.
• When the DSO mode is on, the sound is sometimes
hampered by noises.
t Set the DSO mode to “OFF” (page 6).
16
Preset tuning is not possible.
NO NAME
• Store the correct frequency in the memory.
A track/album/group/disc name is not written in the
• The broadcast signal is too weak.
track.
Automatic tuning is not possible.
NOT READ
• Setting of the local seek mode is not correct.
The disc information has not been read by the unit.
t Tuning stops too frequently:
t Load the disc, then select it on the list.
Press (SENS) until “LOCAL-ON” appears.
NOTREADY
t Tuning does not stop at a station:
The lid of the MD changer is open or the MDs are not
Press (SENS) repeatedly until “MONO-ON” or
inserted properly.
“MONO-OFF” (FM), or “LOCAL-OFF” (AM)
t Close the lid or insert the MDs properly.
appears.
OFFSET
• The broadcast signal is too weak.
There may be an internal malfunction.
t Perform manual tuning.
t Check the connection. If the error indication
During FM reception, the “ST” indication
remains on in the display, consult your nearest
flashes.
Sony dealer.
• Tune in the frequency accurately.
READ
• The broadcast signal is too weak.
The unit is reading all track and album/group
t Press (SENS) to set the monaural reception
information on the disc.
mode to “MONO-ON.”
t Wait until reading is complete and playback starts
An FM programme broadcast in stereo is heard
automatically. Depending on the disc structure, it
in monaural.
may take more than a minute.
The unit is in monaural reception mode.
RESET
tPress (SENS) until “MONO-OFF” appears.
The CD unit and CD/MD changer cannot be operated
because of some problem.
t Press the RESET button (page 4).
Error displays/Messages
“” or “”
1
During reverse or fast-forward, you have reached the
BLANK*
2
beginning or the end of the disc and you cannot go any
Tracks have not been recorded on the MD.*
further.
tPlay an MD with recorded tracks.
1
“”
ERROR*
2
The character cannot be displayed with the unit.
• The disc is dirty or inserted upside down.*
t Clean or insert the disc correctly.
*1 If an error occurs during playback of a CD or MD,
• A blank disc has been inserted.
the disc number of the CD or MD does not appear
• The disc cannot play because of some problem.
in the display.
t Insert another disc.
*2 The disc number of the disc causing the error
FAILURE
appears in the display.
The connection of speakers/amplifiers is incorrect.
If these solutions do not help improve the situation,
tSee the installation guide manual of this model to
consult your nearest Sony dealer.
check the connection.
If you take the unit to be repaired because of CD
LOAD
playback trouble, bring the disc that was used at the
The changer is loading the disc.
time the problem began.
tWait until loading is complete.
L. SEEK +/–
The local seek mode is on during automatic tuning.
NO DISC
The disc is not inserted in the CD/MD changer.
tInsert discs in the changer.
NO ID3
ID3 tag information is not written in the MP3 file.
NO INFO
Text information is not written in the ATRAC3/
ATRAC3plus or WMA file.
NO MAG
The disc magazine is not inserted in the CD changer.
tInsert the magazine in the changer.
NO MUSIC
The disc is not a music file.
tInsert a music CD in this unit or MP3 playable
changer.
17
Проигрыватель компакт-
Поздравляем с покупкой!
дисков с диапазоном FM/AM
Сдепано в Таиланде
Благодарим Вас за то, что Вы остановили
свой выбор на проигрывателе компакт-дисков
Sony. В поездке Вы сможете использовать
следующие функции проигрывателя.
• Воспроизведение компакт-дисков
Можно воспроизводить диски CD-DA
(содержащие также CD TEXT*), CD-R/
CD-RW (с файлами MP3/WMA и диски в
формате Multi Session (стр. 14)), а также
компакт-диски ATRAC CD (форматы
ATRAC3 и ATRAC3plus (стр. 15)).
Тип диска Метка на диске
CD-DA
MP3
WMA
ATRAC CD
• Прием радиостанций
– Можно хранить в памяти до 6 станций в
каждом диапазоне (FM1, FM2, FM3,
AM1 и AM2).
– BTM (Память оптимальной настройки):
устройство выбирает радиостанции с
наиболее сильным сигналом и
сохраняет их в памяти.
• Настройка звучания
– EQ3 stage2: Можно выбрать любую из
7 предварительно настроенных кривых
эквалайзера.
– DSO (Dynamic Soundstage Organizer -
функция динамического звучания):
создает более объемное звуковое поле
с помощью синтеза виртуальных
громкоговорителей для улучшения
качества их звучания, даже если они
установлены в нижней части двери.
– BBE MP: улучшает качество сжатого
цифрового звука, например MP3.
• Использование дополнительного
устройства
Можно также управлять дополнительными
проигрывателями компакт-/мини-дисков.
• Подключение дополнительной
аппаратуры
Входное гнездо AUX на передней панели
проигрывателя позволяет подсоединять
переносное аудиоустройство.
* Диск с CD TEXT - это компакт-диск CD-DA,
содержащий такую информацию, как название
диска, имя исполнителя и названия композиций.
2
Содержание
Начало работы
Другие функции
Сброс параметров устройства . . . . . . . . . . 4
Изменение настроек звука . . . . . . . . . . . . 10
Установка часов . . . . . . . . . . . . . . . . . . . . . . 4
Подстройка характеристик звука
Снятие передней панели . . . . . . . . . . . . . . . 4
— BAL/FAD/SUB . . . . . . . . . . . . . . . . . 10
Установка передней панели . . . . . . . . . . 5
Настройка кривой эквалайзера
Установка диска в устройство . . . . . . . . . . 5
— EQ3. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Извлечение диска . . . . . . . . . . . . . . . . . . . 5
Настройка параметров установки
— SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Использование дополнительного
Расположение органов
оборудования. . . . . . . . . . . . . . . . . . . . . . . . 11
управления и основные
Вспомогательное
операции
аудиооборудование . . . . . . . . . . . . . . . . 11
Проигрыватель
Основное устройство . . . . . . . . . . . . . . . . 6
компакт-/мини-дисков. . . . . . . . . . . . . . 12
Пульт дистанционного управления
Поворотный дистанционный
RM-X151 . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
переключатель RM-X4S. . . . . . . . . . . . 12
Компакт-диск
Дополнительная информация
Надписи на дисплее . . . . . . . . . . . . . . . . . 8
Меры предосторожности . . . . . . . . . . . . . 13
Повторное и перетасованное
Примечания относительно дисков . . . 13
воспроизведение . . . . . . . . . . . . . . . . . . . . 8
О файлах MP3/WMA . . . . . . . . . . . . . . 14
О компакт-дисках ATRAC CD. . . . . . 15
Радиоприемник
Уход за устройством . . . . . . . . . . . . . . . . . 16
Извлечение устройства . . . . . . . . . . . . . . . 17
Сохранение и прием радиостанций . . . . . . 9
Технические характеристики. . . . . . . . . . 17
Автоматическое сохранение — BTM
Поиск и устранение неисправностей . . . 18
(Память оптимальной настройки) . . . . 9
Индикация/сообщения об
Сохранение вручную . . . . . . . . . . . . . . . . 9
ошибках . . . . . . . . . . . . . . задняя крышка
Прием радиостанций, сохраненных в
памяти . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Автоматическая настройка . . . . . . . . . . 9
R
SonicStage и ее логотип являются
товарными знаками корпорации Sony.
ATRAC, ATRAC3, ATRAC3plus и их
логотипы являются товарными знаками
корпорации Sony.
3
Начало работы
Снятие передней панели
Во избежание кражи устройства можно
Сброс параметров
снять с него переднюю панель.
устройства
Предупреждающий сигнал
Перед первым включением устройства
Если до поворота ключа зажигания в
или после замены автомобильного
положение OFF с устройства не была
аккумулятора, а также после изменения
снята передняя панель, то в течение
схемы подключения следует сбросить
нескольких секунд будет слышен
параметры устройства.
предупредительный звуковой сигнал.
Снимите переднюю панель и нажмите
Звуковой сигнал будет слышен только в
кнопку RESET с помощью заостренного
том случае, если используется встроенный
предмета, например шариковой ручки.
усилитель.
1 Нажмите кнопку (OFF).
Устройство выключится.
Кнопка
RESET
2 Нажмите кнопку (OPEN).
Панель откроется.
Примечание
3 Сдвиньте переднюю панель вправо
При нажатии кнопки RESET выполняется
и снимите ее, слегка потянув на
стирание установок времени и некоторых других
себя левый край.
занесенных в память параметров.
Установка часов
Часы данного устройства имеют 24-
часовую индикацию.
1
1 Нажмите и удерживайте кнопку
2
выбора.
Отобразится дисплей установок.
Примечания
2 Нажимайте кнопку выбора, пока не
• Старайтесь не ронять переднюю панель. Не
появится индикация “CLOCK-ADJ”.
надавливайте слишком сильно на переднюю
панель и окошко дисплея.
3 Нажмите кнопку (DSPL).
• Не подвергайте переднюю панель воздействию
Замигает индикация часа.
тепла/высокой температуры или влажности.
4 Поверните регулятор громкости
Старайтесь не оставлять его в припаркованной
для установки значения часов и
машине или на приборной доске/полочке за
задним сиденьем.
минут.
Чтобы переместить индикацию,
нажмите кнопку (DSPL).
5 Нажмите кнопку выбора.
Установка завершена, и часы начинают
отсчет времени.
Чтобы отобразить часы, нажмите кнопку
(DSPL). Нажмите кнопку (DSPL) еще раз,
чтобы вернуться к предыдущей индикации
дисплея.
При использовании пульта дистанционного
управления
Чтобы установить значения часов и минут в шаге
4, нажмите кнопку M или m.
4
- 1
- 2
