Sony DAV-SC8: Using the Video or Other

Controlling the TV

Using the Video or Other

You can control your TV using the buttons

below.

Unit

By pressing You can

You can use VCRs or other units connected to

TV [/1 Turn the TV on or off.

the VIDEO 1 or VIDEO 2 jacks. Refer to the

TV/VIDEO Switch the TV’s input source

operation manual supplied with the unit for

between the TV and other input

further information on the operation.

sources.

TV VOL +/– Adjust the TV volume.

TV CH +/– Select the TV channel.

FUNCTION

Using the number buttons for controlling

the TV

When you set the remote to the TV mode, you

can use the number buttons for controlling the

TV.

Press the TV button.

The TV button turns red and the remote is set to

the TV mode. You can select the TV channels by

using the number buttons.

>10 is for selecting the channel number greater

Press FUNCTION repeatedly until VIDEO 1

than 10.

or VIDEO 2 that you connected the unit to

To cancel the TV mode, press the TV button

appears in the front panel display.

again.

Each time you press FUNCTION, the mode of

Notes

the system changes in the following sequence.

• Depending on the TV, you may not be able to control

DVD t VIDEO 1 t VIDEO 2 t TUNER

your TV or to use some of the buttons above.

(FM or AM) t TV* t DVD...

• The TV button turns off when you do not operate the

* When selecting the TV, TV sound is output.

remote for 10 seconds.

Tip

Depending on the TV manufacture, the following

method also works. Press >10, then the number. (For

example, for channel 25, press >10, then 2 and 5.)

GB

56