Sony DAV-SC8: 5 Load a disc.

5 Load a disc.

Push the disc into the disc slot until the disc

Playing Discs

is pulled in automatically.

The disc is drawn into the system

Playing Discs

automatically and “READING” appears in

the front panel display.

With the playback side facing down

Depending on the DVD or VIDEO CD, some

operations may be different or restricted.

Refer to the operation details supplied with your

disc.

Adjust the

Disc slot

A

H

volume

6 Press H.

The system starts playback (continuous

"/1/

FUNCTION

Connect

play).

STANDBY indicator

headphones

Adjust the volume on the system.

After following Step 6

"/1

Depending on the disc, a menu may appear on

FUNCTION

the TV screen. You can play the disc

interactively by following the instructions on the

menu. (DVD: page 24), (VIDEO CD: page 25).

To remove the disc

Press A on the system, or Z on the remote.

Remove the disc after it is ejected from the

system. “READY!” appears in the front panel

H

display.

To turn on the system

1 Turn on your TV.

Press "/1 on the system. The system turns on. In

2 Switch the input selector on the TV to

standby mode, the system also turns on by

this system.

pressing A on the system or by pressing H.

3

Press "/1 on the system.

The system turns on.

Unless the mode of the system is set to

“DVD,” press FUNCTION to select

“DVD.”

“READY!” appears in the front panel

display and the system is ready for

loading the disc.

4 Press POWER on the subwoofer.

The subwoofer turns on.

GB

22

To turn off the system

Additional operations

Press "/1 on the remote. The system enters

standby mode and the STANDBY indicator

Z

lights up in red. To turn off the system

completely, remove the mains leads from a wall

Playing Discs

outlet.

While playing a disc, do not turn off the system

by pressing "/1 on the system. Doing so may

cancel the menu settings. When you turn off the

system, first press x to stop playback and then

./>

X

press "/1 on the remote.

H

x

Tip

MUTING

If a disc is already loaded to the system, you can play

it back simply by pressing the H. The function

VOLUME +/–

changes to DVD and playback starts (Auto-Function).

However, if Program Play is on, you can only start

playback by pressing the H.

Saving the power in standby

mode

To Press

Press "/1 on the system or "/1 on the remote

Stop x

once.

Pause* X

Tip

Resume play after pause X or H

While the system is in standby mode, the STANDBY

Go to the next chapter,

>

indicator on the system lights up.

track, scene, or file in

To cancel standby mode

continuous play mode

Press "/1 on the remote once.

Go back to the preceding

.

chapter, track, scene, or file

To save power on the subwoofer

in continuous play mode

(Auto power on/off function)

Stop play and remove the

Z

When input signals cease for a few minutes

disc

while the subwoofer is turned on, the ON/

Mute the sound MUTING. To cancel

STANDBY indicator on the subwoofer turns

muting, press it again

red, and the subwoofer enters power saving

or VOLUME + to

adjust the sound

mode. The subwoofer automatically turns back

volume.

on when an input signal is received. To turn off

this function, slide the POWER SAVE switch on

* You cannot pause during JPEG playback.

the rear panel of the subwoofer to OFF.

Notes

Note

• If there is no disc in the system, “READY!” appears

If you turn down the volume level of the system too

on the front panel display.

low, the Auto power on/off function may activate, and

• If DVD playback is paused for approximately one

the subwoofer will enter power saving mode.

hour, the system automatically turns off.

GB

23