Sony MEX-BT2500: Music streaming Deleting registration of all paired devices

3 Press the select button repeatedly until “BT

Making calls

AU” appears, and rotate the volume control

In the case of making calls from this unit, only

dial to adjust the input level (–8 dB to +18

redial is used.

dB).

1 Press (SOURCE) repeatedly until “BT

PHONE” appears.

Operating an audio device with this

2 Press and hold (handsfree) for 3

unit

seconds or more.

You can perform the following operations on this

The phone call starts.

unit if the audio device supports AVRCP (Audio

Video Remote Control Profile) of Bluetooth

To end a call

technology. (The operation differs depending on

Press (handsfree) again.

the audio device.)

To call another phone, use your cellular phone,

To Press

and then transfer the call.

Play (6) (PAUSE) on this unit.

For call transfer details, check the following.

Pause (6) (PAUSE)* on this unit.

Call transfer

Skip tracks SEEK –/+ (

./>) [once for

each track]

In order to activate/deactivate the appropriate

device (this unit/cellular phone), check the

* Depending on the device, it may be necessary to

following.

press twice.

1 Press and hold (handsfree) or use

Operations other than the above should be

your cellular phone.

performed on the audio device.

Note

For details on cellular phone operation, refer to

Even if the source is changed on this unit, playback of

your cellular phone manual.

the audio device does not stop.

Note

Tip

Depending on the cellular phone, handsfree

You can connect a cellular phone that supports A2DP

connection may be cut off when call transfer is

(Advanced Audio Distribution Profile) as an audio

attempted.

device and listen to music.

Music streaming

Deleting registration of all

paired devices

Listening to music from an audio

device

1 Press (OFF).

You can listen to music of an audio device on this

This unit is turned off.

unit if the audio device supports A2DP

2 If “ ” lights, press and hold

(Advanced Audio Distribution Profile) of

(EQ/ BLUETOOTH) until “ ” turns off.

Bluetooth technology.

3 Press and hold the select button.

1 Turn down the volume on this unit.

4 Press the select button repeatedly

2 Press (SOURCE) repeatedly until “BT

until “BT INIT” appears.

AUDIO” appears.

5 Press (SEEK) +.

3 Operate the audio device to start

Initializing starts.

playback.

It takes 8 seconds to cancel all registration.

4 Adjust the volume on this unit.

Do not turn off the power while “INITIAL” is

flashing.

Adjusting the volume level

The volume level is adjustable for any difference

between the unit and the Bluetooth audio device.

1 Start playback of the Bluetooth audio device at

a moderate volume.

2 Set your usual listening volume on the unit.

15