Главная > Инструкция к Телевизору Sony Grand Wega KF-50SX200K > Connecting the Aerial and VCR

Sony Grand Wega KF-50SX200K: Connecting the Aerial and VCR

Connecting the Aerial and VCR: Sony Grand Wega KF-50SX200K

Installation

Connecting the Aerial and VCR

Connecting cables are not supplied.

or

VCR

Stabilizing the TV set the set

After setting up, secure the TV set to a wall, etc., using the supplied brackets and screws, for safety purposes.

1

Mount the two supplied brackets with the screws provided to the upper rear side of the TV set.

2

Pass a strong cord or a chain through each bracket, and then secure to a wall or a pillar, etc.

8

Installation

The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve picture and sound quality

when using it.

If you do not use a Scart lead, after automatically tuning the TV set, refer to the "Manually Tuning the TV" section of this

instruction manual, to tune in the set to the output of your VCR. Also, refer to your VCR instruction manual to find the

output channel of your VCR.

01GBKF50/42SX200K.fm Page 8 Tuesday, January 7, 2003 12:35 PM

OUT IN

Do not block or cover this ventilation opening. For

ventilation, leave a space of at least 10 cm from the wall.

Оглавление

Топ 10 инструкций

Другие инструкции

Sony KD-49X8505B Sony KD-49X8505B Sony FD Trinitron KV-29XL70K Sony FD Trinitron KV-29XL70K Sony BRAVIA KDL-20S2020 Sony BRAVIA KDL-20S2020 Bionaire BCM 3600 Bionaire BCM 3600