Sony Grand Wega KF-50SX200K: Using Optional Equipment

Using Optional Equipment: Sony Grand Wega KF-50SX200K

01GBKF50/42SX200K.fm Page 31 Tuesday, January 7, 2003 12:37 PM

Optional Connections

Using Optional Equipment

Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the C socket using a scart lead. If you do not have a scart lead, use the “Manually

Tuning the TV” section of this instruction manual to tune in the channel of the VCR test signal to TV programme number “0”.

Also refer to your VCR instruction manual to get the VCR test signal.

If your video supports Smartlink, please refer to the “Smartlink” section of this instruction manual.

Connecting to External Audio Equipment

1 To listen to the sound from the TV set on Hi-Fi equipment:

Plug in your Hi-Fi equipment to the E sockets on the rear of the TV set if you wish to amplify the audio output

from the TV.

The output level from the E sockets can be varied by adjusting the volume of the headphones output. Refer to the “Adjusting

the sound” section of this instruction manual to adjust this.

2 To listen to Dolby Prologic system sound on the TV set speakers:

Plug in your Dolby Prologic system decoder amplifier to the D socket on the rear of the TV set if you wish to listen to the audio

output from your equipment on the TV speakers. If you have a Dolby amplifier, connect the centre output from your amplifier

to the D socket to use the TV set as a centre speaker. Refer to the “Using the Features menu” section of this instruction manual

and set the option “Speaker” to “Centre in”.

Remember that the maximum input level of this input is 30 W. Be careful never to exceed this.

GB

For mono equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 4 input signal using the instructions on

this page below.

Select and View the Input Signal

In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the

connector to which you have connected the device.

e. g. : If your VCR is connected to the connector with the symbol

Y1/ 1. Press the button on the remote control

repeatedly until you see the symbol 1 on the screen.

1 Connect your equipment to the designated socket, as shown on the previous page.

2 Press the button on your remote control repeatedly until the correct input symbol

appears on the screen.

Symbol Input signals

1 Audio/video input signal through the Scart connector A or * RGB

through Scart connector A.

2 Audio/Video input signal through the Scart connector B or * RGB

through Scart connector B.

3 Audio/Video input signal through the Scart connector C or * S Video

through Scart connector C.

4 S Video input signal through the 4-pin DIN connector F or * video input

signal through phono jack G and audio input signal through phono jacks H.

* (automatic detection of the signal according to the connected equipment)

3 Switch on the connected equipment.

4 To return to the normal TV picture, press the button on the remote control.

Optional Connections

31

Оглавление