Sony Grand Wega KF-42SX200K: Overview of Remote Control Buttons

6

Overview

Overview of Remote Control Buttons

Overview

To Temporarily Switch Off:

Press to temporarily switch off TV (the standby indicator

on the TV set lights 

up in red). Press again to switch on TV from standby mode.

After 15-30 minutes without a signal and without any button being pressed, 

the TV set switches automatically into standby mode.

VCR DVD on/off: 

Press this button to switch 

your VCR or DVD on or off.

Selecting Input source:

Press this button 

repeatedly until the input of the desired source 

appears on the TV screen.

Selecting channels:

If Media Selector is switched to TV or VCR, press 

this button to select channels.

For double-digit programme numbers, enter the 

second digit within 2.5 seconds.

a) If Media Selector is switched to TV:

Press this button to watch the last channel 

selected (the last channel watched for at least 5 

seconds).

b) If Media Selector is switched to VCR:

To select a double-digit programme on a Sony 

VCR, e.g. 23, press -/- - first and then the 

buttons 2 and 3.

a) Recording button: 

If Media Selector is switched to VCR, press this 

button to record programmes.

b) Resetting to factory set levels:

Press, for a minimum of 3 seconds, to return the 

picture and sound settings to the factory default 

levels. This will also return the set to the install 

condition and the “Auto Tuning” menu will 

appear on the screen. If this is the case refer to the 

section “Switching on the TV set and 

automatically Tuning” (step 4) of this manual.

Freezing the picture: 

Press this button to 

freeze the picture. Press again to return to the 

normal picture.

Selecting Screen format: 

Press this button 

repeteadly to change the format of the screen (for 

more details, please refer to the section “Changing 

the Screen format”) of this manual.

Displaying Multi PIP (Picture In Picture): 

Press to display Multi PIP mode. Press again to 

cancel. For more details, please refer to the section 

“UsingMulti PIP (Picture In Picture)”.

a) Selecting channels: 

Press this button to 

select the number of the next or previous 

broadcast channel.

b) Teletext: 

These buttons are also used for 

teletext operation. For more detail please refer to 

the section “Teletext” of this manual.

Displaying the menu system: 

Press this 

button to display the menu on the screen. Press 

again to remove the menu display from the screen.

Selecting Picture mode: 

Press this button 

repeatedly to change the picture mode.

Muting the Sound: 

Press to mute TV sound. 

Press again to restore the sound.

Selecting TV mode: 

Press to switch off PAP, 

Multi PIP, Teletext or video input.

Displaying the time: 

Press to switch the time 

display on or off (available only when teletext is 

broadcast).

Displaying On Screen Information: 

Press 

to display all on-screen indications. Press again to 

cancel.

Media Selector:

With this remote control you can operate not

only this TV but also the main functions of

your VCR or DVD.

Switch on the device you want to operate and next 

press this button repeatedly to select the VCR, TV 

or  DVD. A green light will be momentarily lit to 

indicate the chosen function.

Before the first time you want to control

a DVD or VCR by using this remote

control, you have to set it up depending on the 

brand of the device to be used. For more details, 

refer to chapter “Remote Control Configuration 

for VCR or DVD” on page 33.

a) PAP (Picture And Picture):

For more details, please refer to the section 

“Using PAP (Picture And Picture)”.

b) Teletext:

Buttons with green symbols are also used for 

teletext operation. For more details, please 

refer to the section “Teletext” of this manual.

NexTView:

For more details, please refer to the section 

“NexTView” of this manual.

Joystick:

a) If Media Selector is switched to TV:

•When MENU is switched on, use these 

buttons to operate the menu system. For 

details refer to “Introducing and Using 

the Menu System” on page 11.

• When MENU is switched off, press OK to 

show an overview of all TV channels. Then 

press

or

to select the channel and

then press

button to watch the selected 

channel. 

b) If Media Selector is switched

to VCR or DVD:

Using these buttons you can control

the main functions of your VCR or DVD.

Fastext: 

These buttons are also used for 

Fastext operation. For more details please refer 

to the “Fastext” chapter in the “Teletext” 

section of this manual.

Selecting Sound effect: 

Press this button 

repeatedly to change the sound effect.

Adjusting TV Volume: 

Press 

this button to adjust the volume 

of the TV.

01GBKF50/42SX200K.fm  Page 6  Tuesday, January 7, 2003  12:35 PM