Sony Grand Wega KF-42SX200K: Connecting the Aerial and VCRStabilizing the TV set the set

8

Installation

Installation

Connecting cables are not supplied.

Connecting the Aerial and VCR Stabilizing the TV set  the set

          After setting up, secure the TV set to a wall, etc., using the supplied brackets and screws, for safety purposes.

1

Mount the two supplied brackets with the screws provided to the upper rear side of the TV set.

2

Pass a strong cord or a chain through each bracket, and then secure to a wall or a pillar, etc.

or

VCR

The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve picture and sound quality 

when using it.

If you do not use a Scart lead, after automatically tuning the TV set, refer to the "Manually Tuning the TV" section of this 

instruction manual, to tune in the set to the output of your VCR. Also, refer to your VCR instruction manual to find the 

output channel of your VCR.

OUT

IN

Do not block or cover this ventilation opening. For 

ventilation, leave a space of at least 10 cm from the wall.

01GBKF50/42SX200K.fm  Page 8  Tuesday, January 7, 2003  12:35 PM