Sony CPD-120AS: Precautions

Precautions: Sony CPD-120AS

Precautions

Installation

• Prevent internal heat build-up by allowing adequate air circulation.

Do not place the unit on surfaces (rugs, blankets, etc.) or near

materials (curtains, draperies) that may block the ventilation holes.

• Do not install the unit near heat sources such as radiators or air ducts,

nor in a place subject to direct sunlight, excessive dust, mechanical

vibration or shock.

• Do not place the unit near equipment which generates magnetism,

such as a converter or high voltage power lines.

Maintenance

• Clean the cabinet, glass panel and controls with a soft cloth lightly

moistened with a mild detergent solution. Do not use any type of

abrasive pad, scouring powder or solvent, such as alcohol or benzine.

• Do not rub, touch, or tap the surface of the screen with sharp or

abrasive items, like a ball point pen or a screwdriver, as this type of

contact may result in a scratched picture tube.

Transportation

• Do not discard the carton and packing materials. When transporting

the unit, use these packing materials so that the unit is properly

packaged.

• When carrying the unit, pay attention not to get your hands caught

between the display and the tilt-swivel.

Continued to the next page ➔

Precautions

GB

5

Warning on Power Connection

• Use the supplied power cord.

For the customers in UK.

If you use the display in UK, please use the supplied UK cable with

UK plug.

for 100 to 120 V AC for 220 to 240 V AC for 240 V AC only

• Before disconnecting the power cord, wait at least 30 seconds after

turning off the power switch to discharge static electricity from the

CRT display surface.

• After the power has been turned on, the CRT is demagnetized for

approximately 5 seconds. This generates a strong magnetic field

around the bezel which may affect the data stored on magnetic tape or

disks near the bezel. Place such magnetic recording equipment and

tapes/disks at a distance from this unit.

The socket-outlet shall be installed near the equipment and shall be

easily accessible.

GB

Precautions

6