Sony FD TRINITRON KV-32FQ70K: Using Optional Equipment

01GBKV28/32FQ70K.fm Page 21 Wednesday, January 15, 2003 7:38 PM

Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets D if you wish to amplify the audio

output from TV. Next , using the menu system, select the “Sound Adjustment” menu and set

the “TV Speakers” to “Off” (see page 10).

Audio level of the external speakers can be modified by pressing the volume buttons on the

remote control. Also treble and bass settings can be modified through the “Sound

Adjustment” menu (see page 10).

Left Hi-Fi

Right Hi-Fi

To enjoy “Dolby Virtual” sound effect through your

speaker

speaker

Hi-Fi equipment:

Place the speakers of your equipment in front of your

listening position and beside the TV set but keeping a

distance of 50 cm between each speaker and the TV set.

Then by using the menu system, select the menu “Sound

Adjustment”. Next select “Dolby V” on the “Effect”

option (see page 10).

~50°

Using Optional Equipment

Your sitting position

GB

1 Connect your equipment to the designated TV

socket, as indicated in the previous page.

2 Switch on the connected equipment.

3 To watch the picture of the connected equipment, press the button repeatedly until the

correct input symbol appears on the screen.

Symbol Input Signals

1 • Audio / video input signal through the Scart connector E

1 • RGB input signal through the Scart connector E. This symbol appears only

if an RGB source has been connected.

2 • Audio / video input signal through the Scart connector F.

2 • RGB input signal through the Scart connector F. This symbol appears only

if an RGB source has been connected.

3 • Audio/video input signal through the Scart connector G.

S

3 • S Video Input signal through the Scart connector G. This symbol appears

only if an S Video source has been connected.

4 • Video input signal through the phono socket B and Audio input signal

through C.

S

4 • S Video Input signal through the front S Video input jack A and Audio

signal through C. This symbol appears only if an S Video source has been

connected.

4 Press button on the remote control to return to the normal TV picture.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the side of the TV and select 4 or 4

S

input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of

this manual and select “Dual Sound” “A” on the sound menu screen (see page 10).

Additional Information

21