Sony KDL-32S2030: 6: Auto-tuning the TV

6

 GB

3

Press 

F

/

f

 to select the language 

displayed on the menu screens, then press 

.

4

Press 

F

/

f

 to select the country/region in 

which you will operate the TV, then press 

.

If the country/region in which you want to use the 

TV does not appear in the list, select “-” instead of 

a country/region.

The message confirming the TV start auto-tuning 

appears on the screen, then go to “6: Auto-tuning 

the TV”.

6: Auto-tuning the TV

The TV will now search for and store all available TV 

channels.

1

Before you start auto-tuning the TV, insert 

a pre-recorded tape into the VCR 

connected to the TV (page 4) and start play 

back.

The video channel will be located and stored on 

the TV during auto-tuning.

If no VCR is connected to the TV, this procedure 

is not required. Go to step 2.

2

Select “OK”, then press 

.

The TV starts searching for all available digital 

channels, followed by all available analogue 

channels. This may take some time, please be 

patient and do not press any buttons on the TV or 

remote.

If a message appears for you to confirm the aerial 

connections

No digital or analogue channels were found. 

Check all the aerial connections and press 

 to 

start auto-tuning again.

3

When the Programme Sorting menu 

appears on the screen, follow the steps of 

“Programme Sorting” (page 28).

If you do not wish to change the order in which the 

analogue channels are stored on the TV, go to step 

4.

4

Press MENU to exit.

The TV has now tuned in all the available 

channels.

4

2