Sony KF-50SX100K: Using the Features Menu

14

Menu System

Menu System

  Using the Features menu you can:

a) Select if you want to listen to the sound from the set directly or through an external amplifier.

b) Adjust automatically the size of picture.

c) Select a time period after which the set switches itself into standby mode.

d) Lock the buttons on the set. In this way, the set only works by using the remote control buttons.

e) Select the source to be output from the Scart connector 

:

2/

q

2 (SMARTLINK). In this way you can record from this scart 

     connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.

Using the Features Menu

1

Press the MENU button on the remote control to display the menu

on the screen.

2

Push the joystick to 

$

 to select the 

 symbol, then push to 

z

 to

enter to the Features menu.

3

Push the joystick to 

$

 or 

4

 to select the desired menu item, then

push to 

z

 (see the table below for the effect of each menu item).

4

Push to 

$

 or 

4

 to select the desired setting and press the OK button

to store.

5

Press the MENU button to exit and return to the normal TV screen.

Features

Effect / Operation

Speaker

$

Main

 (sound from the set)

4

Centre In

 (sound from external amplifier)

Auto Format

$

Off:

 Size of picture is not automatically adjusted.

(only for aerial

Normal:

 Size of picture is automatically adjusted 

signal)

according to the broadcaster information.

4

Full: 

The set automatically adjusts the picture size

to eliminate any dark areas on the TV picture (as

shown on the section “Changing the Screen

 Format)”.

Format Correction

$

Off:

 4:3/14:9 is selected.

(only if Auto Format

is set to “Normal”

4

On: 

Smart mode is selected automatically for

or “Full”)

4:3/14:9 broadcast.

Sleep Timer

4

Off

10

min.

20

min.

...

$

90

min.

• One minute before the set switches into standby

mode, the time remaining is displayed on the

 screen 

automatically.

•  When watching the TV, press the

 button on

 the remote control to display the time remaining.

•  To return to normal operation from standby 

 mode, press the TV 

button on the remote

  

control.

Parental lock

$

Off

(Normal mode)

4

On

(The set can only be switched on using the

remote control, the buttons on the TV do not

 work)

AV2 Output

$

TV

(audio/video signal from the aerial)

AV1

(audio/video signal from the Scart

connector 

:

1/

).

AV2

(audio/video signal from the Scart

connector 

:

2/

q

2 (SMARTLINK).

AV3

(audio/video signal from the Scart

connector 

:

3/

q

3).

4

AV4

(audio/video signal from the connector 

…

 4

placed in the front of the set).

If you have connected a decoder, please remember

to change back the AV2 Output to "TV" for correct

unscrambling.

Picture Adjustment

Select:

Enter Menu:

Picture Mode

  Contrast

  Brightness

  Colour

  Sharpness

     Reset

AI

Noise Reduction

Colour Tone

Personal

On

Off

Normal

Features

Auto Format

  Format Correction

Sleep Timer

Parental Lock

AV2 Output

Normal

On

Off

Off

TV

Select:

Enter:

Speaker

Main

Speaker

Main

Centre In

10 min

Sleep Timer

Parental Lock

Off

On

AV2 Output

TV

AV1

AV2

AV3

AV4

Auto Format

Off

Normal

Full

Format Correction

Off

On

S

RM 903

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

TV

VIDEO