Sony KF-50SX100K: Using Optional Equipment

29

GB

Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the 

B

 or 

C

 socket using a scart lead. If you do not have a scart lead, use the “Manually 

Tuning the TV” section of this instruction manual to tune in the channel of the VCR test signal to TV programme number “0”. 

Also refer to your VCR instruction manual to get the VCR test signal.

If your video supports Smartlink please refer to the "Smartlink" section of this instruction manual.

Connecting to External Audio Equipment

1 To listen to the audio of the set on the Hi-Fi equipment:

Plug in your Hi-Fi equipment to the 

E

 sockets on the rear of the set if you wish to amplify the audio output 

from the TV.

The output level from 

E

 sockets can be varied by adjusting the volume of the headphones. Refer to the “Adjusting the sound”

section of this instruction manual to adjust the volume of the headphones.

2 To listen to the Dolby Prologic system sound on the set speakers:

Plug in your Dolby Prologic system decoder amplifier to the 

D

 socket on the rear of the set if you wish to listen to the audio

output from your equipment on the TV speaker. If you have a Dolby amplifier, connect the centre output  from your amplifier 

to the 

D

 socket to use the set as a centre speaker. Refer to the “Using the Features menu” section of this instruction manual 

and set the option “Speaker” to “Centre in”.

Remember that the maximum input level of this input is 30 W. Be careful never to over this limit.

For mono equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 

 4 input signal using the instructions on 

this page below.

Select and View the Input Signal

In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the

connector to which you have connected the device.

e. g. : Your VCR is connected to the connector with the symbol 

Y

1/

 1. Press the button  

 on the remote control

repeatedly until you see the symbol 

1 on the screen.

Optional Connections

S

RM 903

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

TV

VIDEO

Optional Connections

Using Optional Equipment

1

Connect your equipment to the designated socket, as it is indicated on the previous page.

2

Press the 

 button repeatedly on your remote control until the correct input symbol

appears on the screen.

Symbol

 Input signals

1

1

1

1

• Audio/video input signal through the Scart connector 

A

 or * RGB 

through Scart connector 

A

.

2

2

2

2

• Audio/Video input signal through the Scart connector 

B

 or * S Video

through Scart connector 

B

.

3

3

3

3

• Audio/Video input signal through the Scart connector 

C

 or * S Video

through Scart connector 

C

.

4

4

4

4

• S Video input signal through the 4-pin DIN connector 

F

 or * video input 

signal through phono jack 

G

 and audio input signal through phono jacks 

H

.

* (automatic detection of the signal according to the connected equipment)

3 

Switch on the connected equipment.

4 

To return to the normal TV picture, press the 

 button on the remote control.