Sony KLV-27HR3: Viewing pictures from equipment connected to the TV

Viewing pictures from equipment connected to the TV

1 Connect your equipment to the designated TV socket, as indicated on page 29.

2 Switch on the connected equipment.

3 To watch the picture from the connected equipment, press the / button repeatedly until

the correct input symbol appears on the screen.

Symbol Input Signals

1 • Audio / video input signal through the Scart connector G

1 • RGB input signal through the Scart connector G. This symbol appears only if

an RGB source has been connected.

2 • Audio/video input signal through the Scart connector F.

S

2 • S Video Input signal through the Scart connector F. This symbol appears only

GB

if an S Video source has been connected.

3 • Video input signal through the phono socket B and Audio input signal through

C.

S

3 • S Video Input signal through the side S Video input jack A and Audio signal

through C. This symbol appears only if an S Video source has been connected.

4 Press the button on the remote control to return to the normal TV picture.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the side of the TV and select 3 or 3

S

input signal using the instructions above. Next, refer to the “Sound Adjustment” section of this

manual and set “Dual Sound” option to “A” on the sound menu screen (see page 20).

Additional Information

31