Sony CPD-E530: Specifications

To display this monitor’s name, serial number, and

date of manufacture.

Specifications

While the monitor is receiving a

INFORMATION

video signal, press and hold the

CRT

MENU button for more than

MODEL

:

CPD E530

W

0.24 mm aperture grille pitch, 90-degree deflection, FD Trinitron

5 seconds to display this

SER NO

:

1234567

R

MANUFACTURED

: 2001-52

G

21 inches measured diagonally

monitor’s information box.

B

Viewable image size

Approx. 403.8

× 302.2 mm (w/h) (16 × 12 inches)

19.8" viewing image

If thin lines appear on the screen

Resolution (H:Horizontal, V:Vertical)

(damper wires)

Maximum: H: 2048 dots, V: 1536 lines

Recommended: H: 1600 dots, V: 1200 lines

These lines do not indicate a malfunction; they are a normal

Input signal levels

effect of the Trinitron picture tube with this monitor. These are

Video signal: Analog RGB: 0.700 Vp-p (positive), 75

Ω

shadows from the damper wires used to stabilize the aperture grille.

SYNC signal: H/V separate or composite sync:

The aperture grille is the essential element that makes a Trinitron

TTL 2 k

Ω, Polarity free

picture tube unique by allowing more light to reach the screen,

Sync on Green: 0.3 Vp-p (negative)

resulting in a brighter, more detailed picture.

Standard image area

Approx. 388

× 291 mm

3

1

(15

/8 × 11

/2 inches) or

Approx. 364

× 291 mm

3

1

Damper

(14

/8 × 11

/2 inches)

wires

Deflection frequency*

(H:Horizontal, V:Vertical)

H: 30 to 117 kHz, V: 48 to 170 Hz

AC input voltage/current

100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A

Self-diagnosis function

Power Consumption

Approx. 135 W

This monitor is equipped with a self-diagnosis function. If there is

Operating temperature

a problem with your monitor or computer(s), the screen will go

10 ºC to 40 ºC

blank and the ! (power) indicator will either light up green or flash

Dimensions Approx. 497

× 502 × 485 mm (w/h/d)

5

7

(19

/8 × 19 × 18

/8 inches)

orange. If the ! (power) indicator is lit in orange, the computer is

GB

Mass Approx. 30 kg (66 lb 2 oz)

in power saving mode. Try pressing any key on the keyboard or

Plug and Play DDC2B/DDC2Bi, GTF**

moving the mouse.

Supplied accessories

Power cord

x If the ! (power) indicator is green

HD15 video signal cable

Exclusive Power Mac G3/G4 adapter

1 Disconnect any plugs from the video input 1 and 2

This instruction manual

connectors, or turn off the connected computer(s).

* Recommended horizontal and vertical timing condition

2 Turn the monitor OFF and then ON.

• Horizontal sync width duty should be more than 4.8% of total

horizontal time or 0.8 µs, whichever is larger.

3 Hold the control button upward for 2 seconds before

• Horizontal blanking width should be more than 2.3 µsec.

the monitor enters power saving mode.

• Vertical blanking width should be more than 450 µsec.

** If the input signal is Generalized Timing Formula (GTF) compliant, the

If all 4 color bars appear (white, red, green, blue), the monitor is

GTF feature of the monitor will automatically provide an optimal image

working properly. Reconnect the video input cables and check the

for the screen.

condition of your computer(s).

If the color bars do not appear, there is a potential monitor failure.

Inform your authorized Sony dealer of the monitor’s condition.

x If the ! (power) indicator is flashing orange

Turn the monitor OFF and then ON.

If the ! (power) indicator lights up green, the monitor is working

properly.

If the ! (power) indicator is still flashing, there is a potential

monitor failure. Count the number of seconds between orange

flashes of the ! (power) indicator and inform your authorized Sony

dealer of the monitor’s condition. Be sure to note the model name

and serial number of your monitor. Also note the make and model

of your computer and graphics board.

(continued)

7