Sony CPD-E530: Setup

â

•Trinitron

is a registered trademark of Sony Corporation.

Table of Contents

• Macintosh is a trademark licensed to Apple Computer, Inc., registered in

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

the U.S.A. and other countries.

â

• Windows

and MS-DOS are registered trademarks of Microsoft

Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Corporation in the United States and other countries.

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 6

• IBM PC/AT and VGA are registered trademarks of IBM Corporation of

the U.S.A.

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

ä

• VESA and DDC

are trademarks of the Video Electronics Standard

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Association.

•

ENERGY STAR is a U.S. registered mark.

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

• All other product names mentioned herein may be the trademarks or

Preset mode timing table . . . . . . . . . . . . . . . . . . . . . i

registered trademarks of their respective companies.

• Furthermore, “

ä” and “â” are not mentioned in each case in this manual.

TCO’99 Eco-document . . . . . . . . . . . . . Back Cover

Setup

To select the input signal

1 Connecting your monitor to your

You can connect two computers to this monitor using the HD15

computer

connectors. To select one of the two computers, use the INPUT

switch. The selected connector appears on the screen for 3 seconds.

x To connect to the HD15 input connector

Note

If no signal is input to the selected connector, NO SIGNAL appears on the

screen. After a few seconds, the monitor enters the power saving mode. If

to HD15

video signal cable

to HD15 of the

this happens, switch to the other connector.

(supplied)

connecting computer

The pin assignment of the HD 15 video signal cable

Connecting to a Macintosh or compatible

1

5432

computer

GB

6 7 8 9 10

When connecting this monitor to a Power Mac G3/G4 computer,

11 12 13 14 15

use the supplied adapter if necessary. Connect the supplied adapter

to the computer before connecting the cable. If you connect to

Pin No. Signal

Pin No. Signal

another version of Macintosh series computer, having 2 rows of

1Red

9 DDC + 5V*

pins, you will need a different adapter (not supplied).

2 Green (Sync on

10 Ground

Green)

11 ID (Ground)

3Blue

2 Turning on the monitor and computer

12 Bi-Directional

4 ID (Ground)

Data (SDA)*

1 Connect the power cord to the monitor and press the

5 DDC Ground*

13 H. Sync

! (power) switch to turn on the monitor.

6 Red Ground

14 V. Sync

2 Turn on the computer.

7 Green Ground

15 Data Clock

(SCL)*

No need for specific drivers

8 Blue Ground

This monitor complies with the “DDC” Plug & Play standard and

* DDC (Display Data Channel) is a standard of VESA.

automatically detects all the monitor’s information. No specific driver

needs to be installed to the computer.

The first time you turn on your PC after connecting the monitor, the setup

Wizard may appear on the screen. In this case, follow the on-screen

instructions. The Plug & Play monitor is automatically selected so that you

can use this monitor.

Notes

• Do not touch the pins of the video signal cable connector.

• Check the alignment of the HD15 connector to prevent bending the pins

of the video signal cable connector.

3