Sony KDL-46X3500: Analogue Set-up menu

Analogue Set-up menu: Sony KDL-46X3500

Analogue Set-up menu

You can select the options listed below on the

“Analogue Set-up” menu. To select options in

“Settings”, refer to “Navigating through menus”

(page 27).

1 Digit Direct

When “1 Digit Direct” is set to “On”, you can select an analogue channel using one

preset number button (0 – 9) on the remote.

~

When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering

two digits using the remote.

Auto Tuning

Tunes in all the available analogue channels.

This option allows you to retune the TV after moving house, or to search for new

channels that have been launched by broadcasters.

Programme Sorting

Changes the order in which the analogue channels are stored on the TV.

1 Press

F/f to select the channel you want to move to a new position, then

press .

2 Press

F/f to select the new position for your channel, then press .

Programme Labels

Assigns a channel name of your choice up to five letters or numbers. The name will

be displayed briefly on the screen when the channel is selected. (Names for channels

are usually taken automatically from Text (if available).)

1 Press F/f to select the channel you want to name, then press .

2 Press

F/f to select the desired letter or number (“_” for a blank space),

then press

g.

If you input a wrong character

Press G/g to select the wrong character. Then, press F/f to select the correct

character.

To delete all the characters

Select “Reset”, then press .

3 Repeat the procedure in step 2 until the name is completed.

4 Select “OK”, then press .

GB

40

Manual Programme

Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder/“LNA”, press

PROG +/– to select the programme number with the channel. You cannot select a

Preset

programme number that is set to “Skip” (page 41).

Programme/System/Channel

Presets programme channels manually.

1 Press

F/f to select “Programme”, then press .

2 Press

F/f to select the programme number you want to manually tune (if

tuning a VCR, select channel 00), then press RETURN.

3 Press F/f to select “System”, then press .

4 Press

F/f to select one of the following TV broadcast systems, then

press RETURN.

B/G: For western European countries/regions

I: For the United Kingdom

D/K: For eastern European countries/regions

L: For France

5 Press F/f to select “Channel”, then press .

6 Press

F/f to select “S” (for cable channels) or “C” (for terrestrial

channels), then press

g.

7 Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. When a channel has been found,

the search will stop. To continue searching, press

F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of the broadcast you want or your

Using Menu Functions

VCR channel number.

8 Press to jump to “Confirm”, then press .

9 Press

f to select “OK”, then press .

Repeat the procedure above to preset other channels manually.

Label

Assigns a name of your choice, up to five letters or numbers, to the selected channel.

This name will be displayed briefly on the screen when the channel is selected.

To input characters, follow steps 2 to 4 of “Programme Labels” (page 40).

AFT

Allows you to fine-tune the selected programme number manually if you feel that a

slight tuning adjustment will improve the picture quality.

You can adjust the fine tuning over a range of –15 to +15. When “On” is selected,

the fine tuning is performed automatically.

Audio Filter

Improves the sound for individual channels in the case of distortion in mono

broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or

intermittent sound muting when watching mono programmes.

If you do not experience any sound distortion, we recommend that you leave this

option set to the factory setting “Off”.

~

You cannot receive stereo or dual sound when “Low” or “High” is selected.

Skip

Skips unused analogue channels when you press PROG +/– to select channels. (You

can still select a skipped channel using the number buttons.)

Continued

GB

41

Decoder

Shows and records the scrambled channel selected when using a decoder connected

directly to scart connector / 1, or to scart connector / 2 via a VCR.

~

Depending on the country/region selected for “Country” (page 7), this option may not be

available.

LNA

Improves the picture quality for individual channels in the case of very weak

broadcast signals (noisy picture).

If you cannot see any improvement in the picture quality even if you set to “On”, set

this option to “Off” (factory setting).

Confirm

Saves changes made to the “Manual Programme Preset” settings.

GB

42

Оглавление