Sony CPD-E230: Precautions

Use of the tilt-swivel

Precautions

This monitor can be adjusted

within the angles shown right. To

90°

15°

turn the monitor vertically or

90°

Warning on power connections

horizontally, hold it at the bottom

5°

• Use the supplied power cord. If you use a different power cord,

with both hands. Be careful not to

be sure that it is compatible with your local power supply.

pinch your fingers at the back of

For the customers in the UK

the monitor when you tilt the

If you use the monitor in the UK, be sure to use the supplied UK

monitor up vertically.

power cable.

Centering line

Example of plug types

for 100 to 120 V AC for 200 to 240 V AC for 240 V AC only

• Before disconnecting the power cord, wait at least 30 seconds

after turning off the power to allow the static electricity on the

screen’s surface to discharge.

• After the power is turned on, the screen is demagnetized

(degaussed) for about 5 seconds. This generates a strong

magnetic field around the screen which may affect data stored

on magnetic tapes and disks placed near the monitor. Be sure to

keep magnetic recording equipment, tapes, and disks away

from the monitor.

The equipment should be installed near an easily accessible

outlet.

Installation

Do not install the monitor in the following places:

• on surfaces (rugs, blankets, etc.) or near materials (curtains,

draperies, etc.) that may block the ventilation holes

• near heat sources such as radiators or air ducts, or in a place

subject to direct sunlight

• in a place subject to severe temperature changes

• in a place subject to mechanical vibration or shock

• on an unstable surface

• near equipment which generates magnetism, such as a

transformer or high voltage power lines

• near or on an electrically charged metal surface

• inside an enclosed rack

Maintenance

• Clean the screen with a soft cloth. If you use a glass cleaning

liquid, do not use any type of cleaner containing an anti-static

solution or similar additive as this may scratch the screen’s

coating.

• Do not rub, touch, or tap the surface of the screen with sharp or

abrasive items such as a ballpoint pen or screwdriver. This type

of contact may result in a scratched picture tube.

• Clean the cabinet, panel and controls with a soft cloth lightly

moistened with a mild detergent solution. Do not use any type

of abrasive pad, scouring powder or solvent, such as alcohol or

benzine.

Transportation

When you transport this monitor for repair or shipment, use the

original carton and packing materials.

8