Sony CPD-E230: Specifications

If thin lines appear on the screen

Specifications

(damper wires)

CRT 0.24 mm aperture grille pitch (center)

These lines do not indicate a malfunction; they are a normal

17 inches measured diagonally

effect of the Trinitron picture tube with this monitor. These are

90-degree deflection

shadows from the damper wires used to stabilize the aperture grille.

FD Trinitron

The aperture grille is the essential element that makes a Trinitron

Viewable image size

Approx. 327

× 243 mm (w/h)

picture tube unique by allowing more light to reach the screen,

7

5

(12

/8 × 9

/8 inches)

resulting in a brighter, more detailed picture.

Viewing image Approx. 406 mm (16.0 inches)

Resolution

Maximum Horizontal: 1600 dots

Vertical: 1200 lines

Damper

Recommended Horizontal: 1024 dots

wires

Vertical: 768 lines

Standard image area

Approx. 312

× 234 mm (w/h)

3

1

(12

/8 × 9

/4 inches)

Deflection frequency

Self-diagnosis function

Horizontal: 30 to 85 kHz

Vertical: 48 to 170 Hz

This monitor is equipped with a self-diagnosis function. If there is

AC input voltage/current

a problem with your monitor or computer(s), the screen will go

100 to 240 V, 50-60 Hz, Max. 1.7 A

blank and the 1 (power) indicator will either light up green or flash

Power consumption Approx.115 W

orange. If the 1 (power) indicator is lit in orange, the computer is

Operating temperature

in power saving mode. Try pressing any key on the keyboard or

10 ºC to 40 ºC

moving the mouse.

7

1

Dimensions

Approx. 402

×

418

×

421 mm (w/h/d)

(15

/8 × 16

/2 ×

5

16

/8 inches)

x If the 1 (power) indicator is green

Mass Approx. 19 kg (41.9 lb)

Plug and Play DDC2B/DDC2Bi

1 Disconnect the video input cable or turn off the

GTF

Supplied accessories

connected computer.

Power cord (1)

GB

2 Press the 1 (power) button twice to turn the monitor

Warranty card (1)

off and then on.

Notes on cleaning the screen’s surface (1)

This instruction manual

3 Move the joystick , for 2 seconds.

Preset and user modes

When the monitor receives an input signal, it automatically matches the

If all 4 color bars appear (white, red, green, blue), the monitor is

signal to one of the factory preset modes stored in the monitor’s memory to

working properly. Reconnect the video input cables and check the

provide a high quality picture

(see “Preset mode timing table” on page i).

condition of your computer(s).

For input signals that do not match one of the factory preset modes, the

If the color bars do not appear, there is a potential monitor failure.

digital Multiscan technology of this monitor ensures that a clear picture

Inform your authorized Sony dealer of the monitor’s condition.

appears on the screen for any timing in the monitor’s frequency range

(horizontal: 30 – 85 kHz, vertical: 48 – 170 Hz). If the picture is adjusted,

the adjustment data is stored as a user mode and automatically recalled

x If the 1 (power) indicator is flashing orange

whenever the same input signal is received.

Turn the monitor OFF and then ON.

Power saving function

This monitor meets the power-saving guidelines set by VESA, ENERGY

If the 1 (power) indicator lights up green, the monitor is working

STAR, and NUTEK. If no signal is received by the monitor from your

properly.

computer, the monitor will automatically reduce power consumption as

If the 1 (power) indicator is still flashing, there is a potential

shown below.

monitor failure. Count the number of seconds between orange

Power mode Power consumption 1 (power)

flashes of the 1 (power) indicator and inform your authorized Sony

indicator

dealer of the monitor’s condition. Be sure to note the model name

and serial number of your monitor. Also note the make and model

normal operation

≤ 115 W green

of your computer and graphics board.

active off*

≤ 3 W orange

power off 0 W (Approx.) off

* When your computer is in active off mode, MONITOR IS IN POWER

SAVE MODE appears on the screen if you press any button on the

monitor. After a few seconds, the monitor enters the power saving

mode again

Design and specifications are subject to change without notice.

7