Sony KDL-40X2000: AV Set-up menu

AV Set-up menu: Sony KDL-40X2000

AV Set-up menu

You can select the options listed below on the AV Set-

up menu. To select options in “Settings”, refer to

“Picture menu” (page 24).

AV Preset

Assigns a name to any equipment connected to the side and rear sockets. The name

Using MENU Functions

will be displayed briefly on the screen when the equipment is selected. You can skip

input signals from connected equipment that you do not want displayed on the

screen.

1 Press

F/f to select the desired input source, then press .

2 Press

F/f to select the desired option below, then press .

Equipment labels: Uses one of the preset labels to assign a name to connected

equipment.

“Edit”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” (page 35).

“Skip”: Skips an unnecessary input source.

AV7 Input

“Auto”: Switches automatically between the component video sockets, S Video

socket, and the composite video sockets on the left side of the TV depending on the

cable connection.

“Component”: Activates the component video sockets on the left side of the TV.

“S Video”: Activates the S Video socket on the left side of the TV.

“Composite”: Activates the composite video sockets on the left side of the TV.

Tip

When multiple cables are connected and “Auto” is selected, “Component”, “S

Video”, “Composite” will be activated in that order.

AV2 Output

Sets a signal to be output through the socket labelled / 2 on the rear of the

TV. If you connect a VCR or other recording equipment to the / 2 socket,

you can then record from the equipment connected to other sockets of the TV.

“TV”: Outputs a broadcast.

“AV1”: Outputs signals from equipment connected to the / 1 socket.

“AV3”: Outputs signals from equipment connected to the / 3 socket.

“AV7”: Outputs signals from equipment connected to the / 7 socket.

“Auto”: Outputs whatever is being viewed on the screen (except signals from the

/ 4, HDMI IN 5, HDMI IN 6 and PC sockets).

Colour System

Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58” or

“NTSC4.43”) according to the input signal from the input source.

Game Mode

Depending on the game software, reaction times may slow during fast-moving

scenes, etc. Select “On” to improve the reaction times.

Continued

GB

33

Colour Matrix

Usually used in the factory setting (AV1/2/3/7 (Composite and S video input signal)

is set to “ITU601”, and AV4/5/6/7 (Component input signal) is set to “Auto”). If the

tone of the picture from the input source is unnatural, select either “ITU601” or

“ITU709”, which normalizes the tone.

GB

34

Оглавление