Sony FD TRINITRON KV-29LS40K: Using Optional Equipment

Using Optional Equipment: Sony FD TRINITRON KV-29LS40K

KV29LS40K GB.fm Page 18 Monday, February 2, 2004 9:42 AM

Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets E if you wish to amplify the audio output from TV. Next,

using the menu system, select the Sound Adjustment menu. Enter the Detail Set Up option and set TV

Speakers to Off.

Audio level of the external speakers can be modified by pressing the volume buttons on the remote control.

Also treble and bass settings can be modified through the Sound Adjustment menu.

Left Hi-Fi

Right Hi-Fi

To enjoy Dolby Virtual sound effect through your Hi-Fi

Speaker

Speaker

equipment:

Place the speakers of your equipment in front of your listening

position and beside the TV set but keeping a distance of 50 cm

between each speaker and the TV set.

Then by using the menu system, select the menu Sound

Adjustment. Next select Detail Adjustment and set Dolby

Virtual to On.

~50º

Your sitting position

Using Optional Equipment

1 Connect your equipment to the designated TV socket, as indicated in the previous page.

2 Switch on the connected equipment.

3 To watch the picture of the connected equipment, press the button repeatedly until the correct input

symbol appears on the screen.

Symbol Input Signals

1 Audio / video input signal through the Scart connector D

RGB input signal through the Scart connector D. This symbol appears only if an RGB source

has been connected.

2 Audio/video input signal through the Scart connector F.

S

2 S Video Input signal through the Scart connector F. This symbol appears only if an S Video

source has been connected.

3 Video input signal through the phono socket B and Audio input signal through C.

S

3 S Video Input signal through the front S Video input jack A and Audio signal through C.

This symbol appears only if an S Video source has been connected.

4 Press button on the remote control to return to the normal TV picture.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select 3 or 3 input signal using

S

the instructions above. Finally, refer to the Sound Adjustment section of this manual and select Dual Sound

A on the sound menu screen.

18

Additional Information

Оглавление