Sony KV-29XL71K: Connecting Additional Equipment

Connecting Additional Equipment: Sony KV-29XL71K

Connecting Additional Equipment

Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets D if you wish to

Left Hi-Fi

Right Hi-Fi

amplify the audio output from your TV. Next, using the menu system,

speaker

speaker

select the Set Up menu. Enter the Detail Set Up menu and set TV

Speakers to Off”.

The audio level of the external speakers can be modified by

pressing the volume buttons on the remote control. Also, treble and

bass settings can be modified through the Sound Adjustment

menu.

~50°

To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment:

Place the speakers of your equipment in front of your sitting position

and besides the TV set, but keeping a distance of 50 cm from each

Your sitting position

speaker to the TV set.

Then, using the menu system, select the menu Sound Adjustment,

and select Dolby Virtual on the Effect option.

Using optional Equipment

Connect your equipment to the designated TV socket, as indicated in the previous page.

1

Switch on the connected equipment.

2

To watch the picture from the connected equipment, press the button repeatedly until the correct input symbol

3

appears on the screen.

Symbol

Input Signals

1

Audio / video input signal through the Scart connector E.

1

RGB input signal through the Scart connector E. This symbol appears only if a RGB source has

been connected.

2

Audio / video input signal through the Scart connector F.

2

RGB input signal through the Scart connector F. This symbol appears only if a RGB source has

been connected.

3

Audio/video input signal through the Scart connector G.

S

3

S Video Input signal through the Scart connector G. This symbol appears only if a S Video source

has been connected.

4

Video input signal through the phono socket B and Audio input signal through C.

S

4

S Video Input signal through the front S Video input jack A and Audio signal through C. This symbol

appears only if a S Video source has been connected.

Press button on the remote control to return to the normal TV picture.

4

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select 4 or 4 input signal using the

S

instructions above. Finally, refer to the Sound Adjustment section of this manual and select Dual Sound” “A on the

sound menu screen.

18 Connecting additional equipment

Оглавление