Sony Bravia KDL-32D3010: Using HDMI control

2 Press F/f to select “PAP”, then press .

The picture from connected equipment is

Using HDMI control

displayed on the left and the TV programme is

displayed on the right.

The HDMI control function allows equipment to

3 Press number buttons or PROG +/- to

control each other using HDMI CEC (Consumer

Electronics Control) specified by HDMI.

select the TV channel.

You can perform interlocked control operations

To return to single picture mode

between Sony HDMI control compatible equipment

Press or RETURN.

such as a TV, DVD recorder with hard disk and audio

z

system by connecting the equipment with HDMI

The picture framed in green is audible. You can switch the

cables.

audible picture by pressing

G/g.

Be sure to correctly connect and set the compatible

equipment to use the HDMI control function.

To view two pictures simultaneously

– PIP (Picture in Picture)

To connect the HDMI control compatible

You can view two pictures (PC input and TV

equipment

programme) on the screen simultaneously.

Connect the compatible equipment and the TV with an

Using Optional Equipment

Connect a PC (page 16), and make sure that images

HDMI cable. When connecting an audio system, in

from a PC appear on the screen.

addition to the HDMI cable, be sure to also connect

~

the DIGITAL OUT (OPTICAL) socket of the TV and

• You cannot display resolutions higher than WXGA (1280

the audio system using an optical audio cable. For

× 768 pixels).

details, see page 16.

• “Power Management” is not available in PIP mode

(page 30).

1 Press TOOLS to display the Tools menu.

To make the HDMI control settings

HDMI control must be set on both the TV side and the

2 Press F/f to select “PIP”, then press .

connected equipment side. See “HDMI Set-up” on

The picture from the connected PC is displayed with

page 28 for the TV side settings. See the operating

full size and the TV programme is displayed on the

instructions of the connected equipment for setting

right corner.

details.

You can use

F/f/G/g to move the TV programme

screen position.

3 Press number buttons or PROG +/- to

HDMI control functions

select the TV channel.

• Turns the connected equipment off interlocked with

To return to single picture mode

the TV.

Press RETURN.

• Turns the TV on interlocked with the connected

z

equipment and automatically switches the input to

You can switch the audible picture by selecting “Audio

the equipment when the equipment starts to play.

Swap” from the Tools menu.

• If you turn on a connected audio system while the

TV is on, the input switches to the audio from the

audio system.

• Adjusts the volume and mutes the sound of a

connected audio system.

GB

19