Sony KV-32HQ150K: 3 Connecting an aerial and a VCR to the TV

Getting started

3 Connecting an aerial and a VCR to the TV

Connecting an aerial only

Connect your aerial lead to the aerial socket marked on the rear of

1.

the TV.

Connecting an aerial and a VCR

Connect your aerial lead to the IN socket on your VCR.

1.

Connect a lead from the OUT socket on your VCR to the aerial socket

2.

marked on the rear of the TV.

Connect a fully wired scart lead from the socket on the rear of

3

s

3

3.

the TV to the scart socket on your VCR.

Connect the VCR to the mains socket and switch on.

4.

RF lead

Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This

Scart lead

(not

5.

(not

supplied)

enables the TV to locate and store the video channel during the

supplied)

‘Automatically tuning the TV’ procedure.

Notes:

VCR

Socket names may vary depending on make and model of VCR. Refer to your VCR

instruction manual for details.

If your VCR does not have a scart socket follow the connecting instructions above ignoring

the scart lead connection. You will also need to manually tune the VCR to a spare TV

channel.

4 Switching on the TV

Connect the TV plug to your mains socket (220 - 240 V AC, 50 Hz).

1.

Push in the on/off button on the side of the TV.

2.

Note:

If the red indicator on the front of the TV is lit the TV is in standby mode. Press the TV

/

button on the remote control to switch on the TV. Please be patient as the picture may take

a few moments to appear on screen.

On/Off button

5