Sony KV-32CS71K: Connecting Additional Equipment

32CS71 K GB.fm Page 20 Wednesday, February 16, 2005 2:16 PM

Connecting Additional Equipment

Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets D if you wish to amplify the audio output from your

TV. Next, using the menu system, select the “Set Up” menu. Enter the “Detail Set Up” menu and set “TV

Speakers” to “Off”.

The audio level of the external speakers can be modified by pressing the volume buttons on the remote

control. Also, treble and bass settings can be modified through the “Sound Adjustment” menu.

To enjoy “Dolby Virtual” sound effect through your Hi-Fi

Left Hi-Fi

Right Hi-Fi

equipment:

speaker

speaker

Place the speakers of your equipment in front of your sitting position

and besides the TV set, but keeping a distance of 50 cm from each

speaker to the TV set.

Then, using the menu system, select the menu “Sound Adjustment”,

and select “Dolby Virtual” on the “Effect” option.

50cm 50cm

Your sitting position

Using optional Equipment

1

Connect your equipment to the designated TV socket, as indicated in the previous page.

2

Switch on the connected equipment.

3

To watch the picture from the connected equipment, press the button repeatedly until the correct

input symbol appears on the screen.

Symbol

Input Signals

1

• Audio/video input signal through the Scart connector E.

1

• RGB input signal through the Scart connector E. This symbol appears only if a RGB

source has been connected.

2

• Audio/video input signal through the Scart connector F.

2

• RGB input signal through the Scart connector F. This symbol appears only if a RGB

source has been connected.

3

• Audio/video input signal through the Scart connector G.

S

3

• S Video Input signal through the Scart connector G. This symbol appears only if a S

Video source has been connected.

4

• Video input signal through the phono socket B and Audio input signal through phono

socket C.

S

4

• S Video Input signal through the front S Video input jack A and Audio signal through

phono socket C. This symbol appears only if a S Video source has been connected.

4

Press the button on the remote control to return to the normal TV picture.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the side of the TV and select 4 or 4 input signal using

S

the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual

Sound” “A” on the sound menu screen.

20 Additional Information