Главная > Инструкция к Телевизору Sony KDL-46S2530 > Analogue Set-up menu (Analogue mode only)

Sony KDL-46S2530: Analogue Set-up menu (Analogue mode only)

Analogue Set-up menu (Analogue mode only): Sony KDL-46S2530

010COV.book Page 28 Monday, November 13, 2006 9:42 AM

Analogue Set-up menu (Analogue mode only)

You can change/set the analogue settings using the

Analogue Set-up menu. To select options in

“Settings”, see “Navigating through menus”

(page 19).

1 Digit Direct

When “1 Digit Direct” is set to “On”, you can select an analogue channel using one

preset number button (0 - 9) on the remote.

Note

When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering

two digits using the remote.

Auto Tuning

Tunes in all the available analogue channels.

Usually you do not need to do this operation because the channels are already tuned

when the TV was first installed (page 5, 6). However, this option allows you to

repeat the process (e.g., to retune the TV after moving house, or to search for new

channels that have been launched by broadcasters).

Programme Sorting

Changes the order in which the analogue channels are stored on the TV.

1 Press

F/f to select the channel you want to move to a new position,

then press .

2 Press

F/f to select the new position for your channel, then press .

Programme Labels

Assigns a channel name of your choice up to five letters or numbers. The name will

be displayed briefly on the screen when the channel is selected. (Names for channels

are usually taken automatically from Text (if available).)

1 Press

F/f to select the channel you want to name, then press .

2 Press

F/f to select the desired letter or number (“_” for a blank space),

then press

g.

If you input a wrong character

Press G/g to select the wrong character. Then, press F/f to select the correct

character.

To delete all the characters

Select “Reset”, then press .

3 Repeat the procedure in step 2 until the name is complete.

4 Select “OK”, then press .

28

GB

KDL-46/40/32S2510

2-670-908-43(1)

010COV.book Page 29 Monday, November 13, 2006 9:42 AM

Manual Programme

Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/-

to select the programme number with the channel. You cannot select a programme

Preset

number that is set to skip (page 30).

Programme

/System/Channel

Presets programme channels manually.

1 Press

F/f to select “Programme”, then press .

2 Press

F/f to select the programme number you want to manually tune

(if tuning a VCR, select channel 00), then press RETURN.

3 Press

F/f to select “System”, then press .

4 Press

F/f to select one of the following TV broadcast systems, then

press

G.

B/G: For western European countries/regions

D/K: For eastern European countries/regions

L: For France

I: For the United Kingdom

5 Press F/f to select “Channel”, then press .

Using MENU Functions

6 Press

F/f to select “S” (for cable channels) or “C” (for terrestrial

channels), then press

g.

7 Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. When a channel has been found,

the search will stop. To continue searching, press

F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of the broadcast you want or

your VCR channel number.

8 Press to jump to “Confirm”, then press .

9 Press

f to select “OK”, then press .

Repeat the procedure above to preset other channels manually.

Label

Assigns a name of your choice, up to five letters or numbers, to the selected channel.

This name will be displayed briefly on the screen when the channel is selected.

To input characters, follow steps 2 to 4 of “Programme Labels” (page 28).

AFT

Allows you to fine-tune the selected programme number manually if you feel that a

slight tuning adjustment will improve the picture quality.

You can adjust the fine tuning over a range of -15 to +15. When “On” is selected, the

fine tuning is performed automatically.

Audio Filter

Improves the sound for individual channels in the case of distortion in mono

broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or

intermittent sound muting when watching mono programmes.

If you do not experience any sound distortion, we recommend that you leave this

option set to the factory setting “Off”.

Notes

• You cannot receive stereo or dual sound when “Low” or “High” is selected.

• “Audio Filter” is not available when “System” is set to “L”.

Continued

29

GB

KDL-46/40/32S2510

2-670-908-43(1)

010COV.book Page 30 Monday, November 13, 2006 9:42 AM

Skip

Skips unused analogue channels when you press PROG +/- to select channels. (You

can still select a skipped channel using the number buttons.)

Decoder

Views and records the scrambled channel selected when using a decoder connected

directly to scart connector / 1, or to scart connector / 2 via a VCR.

Note

Depending on the country/region selected for “Country” (page 6), this option may not be

available.

Confirm

Saves changes made to the “Manual Programme Preset” settings.

30

GB

KDL-46/40/32S2510

2-670-908-43(1)

Оглавление

Топ 10 инструкций

Другие инструкции

Sony KDL-50W805B Sony KDL-50W805B Sony KDL-46X3500 Sony KDL-46X3500 Sony KDL-42W654A Sony KDL-42W654A Sony KDL-40W4710 Sony KDL-40W4710