Sony KDL-46S2530: 6: Auto-tuning the TV

010COV.book Page 6 Monday, November 13, 2006 9:42 AM

3 Press F/f to select the language

1 Before you start auto-tuning the TV, insert

displayed on the menu screens, then press

a pre-recorded tape into the VCR

.

connected to the TV (page 4) and start play

back.

The video channel will be located and stored on

the TV during auto-tuning.

If no VCR is connected to the TV, this procedure

is not required. Go to step 2.

2 Select “OK”, then press .

4 Press F/f to select the country/region in

which you will operate the TV, then press

The TV starts searching for all available digital

.

channels, followed by all available analogue

channels. This may take some time, please be

patient and do not press any buttons on the TV or

remote.

If a message appears for you to confirm the aerial

connections

No digital or analogue channels were found.

Check all the aerial connections and press to

start auto-tuning again.

3 When the Programme Sorting menu

appears on the screen, follow the steps of

“Programme Sorting” (page 28).

If you do not wish to change the order in which the

If the country/region in which you want to use the

analogue channels are stored on the TV, go to step

TV does not appear in the list, select “-” instead of

4.

a country/region.

The message confirming the TV start auto-tuning

4 Press MENU to exit.

appears on the screen, then go to “6: Auto-tuning

The TV has now tuned in all the available

the TV”.

channels.

6: Auto-tuning the TV

The TV will now search for and store all available TV

channels.

2

4

6

GB

KDL-46/40/32S2510

2-684-953-42(1)