Sony KDL-46S2530: Set-up menu

Set-up menu: Sony KDL-46S2530

010COV.book Page 25 Monday, November 13, 2006 9:42 AM

Set-up menu

You can select the options listed below on the Set-up

menu. To select options in “Settings”, see “Navigating

through menus” (page 19).

Using MENU Functions

Auto Start-up

Starts the “first time operation menu” to select the language and country/region, and

tune in all available digital and analogue channels. Usually, you do not need to do

this operation because the language and country/region will have been selected and

channels already tuned when the TV was first installed (page 5, 6). However, this

option allows you to repeat the process (e.g., to retune the TV after moving house,

or to search for new channels that have been launched by broadcasters).

Language

Selects the language in which the menus are displayed.

AV Preset

Assigns a name to any equipment connected to the side and rear sockets. The name

will be displayed briefly on the screen when the equipment is selected. You can skip

an input source that is not connected to any equipment.

1 Press

F/f to select the desired input source, then press .

2 Press

F/f to select the desired option below, then press .

Equipment labels: Uses one of the preset labels to assign a name to connected

equipment.

“Edit”: Creates your own label. Follow steps 2 to 4 of “Programme Labels”

(page 28).

“Skip”: Skips an input source that is not connected to any equipment when you press

to select the input source.

Auto S Video

Selects the input signal from S video sockets 6 when / 6 sockets are both

connected.

Timer Settings

Sets the timer to turn on/off the TV.

Sleep Timer

Sets a period of time after which the TV automatically switches itself into standby

mode.

When the Sleep Timer is activated, the (Timer) indicator on the TV (front) lights

up in orange.

Tips

If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.

“TV will soon turn off by sleep timer.” appears on the screen one minute before the TV

switches to standby mode.

Continued

25

GB

KDL-46/40/32S2510

2-670-908-43(1)

010COV.book Page 26 Monday, November 13, 2006 9:42 AM

On Timer

Sets the timer to turn on the TV.

“Day”: Selects the day on which you want to activate the On Timer.

“Time”: Sets the time to turn on the TV.

“Duration”: Selects the time period after which the TV automatically switches to

standby mode again.

“Volume Set-up”: Sets the volume for when the timer turns on the TV.

Clock Set

Allows you to adjust the clock manually. When the TV is receiving digital channels,

the clock cannot be adjusted manually since it is set to the time code of the

broadcasted signal.

Power Saving

Selects the power saving mode to reduce the power consumption of the TV.

When “Picture Off” is selected, the picture is switched off and the (Picture Off)

indicator on the TV (front) lights up in green. The sound remains unchanged.

Light Sensor

Automatically optimizes the picture settings according to the ambient light in the

room.

AV2 Output

Sets a signal to be output through the socket labelled / 2 on the rear of the

TV. If you connect a VCR or other recording equipment to the / 2 socket,

you can then record from the equipment connected to other sockets of the TV.

“TV”: Outputs a broadcast.

“AV1”: Outputs signals from equipment connected to the / 1 socket.

“AV6”: Outputs signals from equipment connected to the / 6 socket.

“Auto”: Outputs whatever is being viewed on the screen (except signals from the

/ 3, HDMI IN 4/5 and PC sockets).

Quiet Power On

Sets the volume control at a low level when the TV is first turned on, gradually

increasing the sound to a preset level.

Speaker

Switches on/off the TV’s internal speakers.

“On”: The TV speakers are turned on in order to listen to the TV’s sound through

TV’s speakers.

“Off”: The TV speakers are turned off in order to listen to the TV’s sound only

through your external audio equipment connected to the audio output sockets.

Colour System

Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”,

or “PAL60”) according to the input signal from the input source.

Product Information

Displays your TV’s system information.

All Reset

Resets all the Set-up settings to the factory settings and then launches the Auto Start-

up screen.

26

GB

KDL-46/40/32S2510

2-670-908-43(1)

Оглавление