Sony XAV-A1: Specifications
Specifications: Sony XAV-A1
Specifications
System
Amplifier section
Laser Semiconductor laser
Outputs Speaker outputs
Signal format system
(sure seal connectors)
PAL
Speaker impedance
4 - 8 ohms
Monitor section
Maximum power output
Display type Wide LCD color monitor
50 W × 4 (into 4 ohms, at 1 kHz)
Size 7 in.
System TFT active matrix
General
Number of pixel
Power requirements
336,960 pixels
12 V DC, from car battery (negative
ground)
DVD/CD Player section
Inputs Power supply (1)
Signal-to-noise ratio
AUX (3)
100 dB
Outputs Front PRE out (1)
Frequency response
Rear PRE out (1)
10 – 20,000 Hz
Subwoofer (mono) (2)
Wow and flutter
Power aerial relay control lead (1)
Below measurable limit
Power amplifier control lead (1)
Harmonic distortion (DVD)
Rear Monitor OUT (1)
0.01%
Tone controls Bass ±10 dB at 100 Hz
Treble ±10 dB at 10 kHz
Tuner section
Dimensions With monitor closed
FM
Approx. 178 × 50 × 185 mm (W × H
Tuning range
× D)
87.5 - 108 MHz
Mass Approx. 1.7 kg
Intermediate frequency
Supplied accessories
10.7 MHz/550 kHz
Remote commander RM-X706 (1)
Usable sensitivity
(incl. 1 lithium battery)
9 dBf
Parts for installation and
Frequency response
connections (1 set)
30 - 15,000 Hz
Operating Instructions (1 set)
Selectivity 75 dB (400 kHz)
S/N ratio 64 dB (stereo)
Design and specifications are subject to
69 dB (mono)
change without notice.
Harmonic distortion at 1 kHz
US and foreign patents licensed from Dolby
0.5% (stereo)
Laboratories.
0.4% (mono)
Separation 35 dB at 1 kHz
AM
Tuning range
531 - 1,602 kHz
• Lead-free solder is used for soldering.
Intermediate frequency
•Halogenated flame retardants are not used
10.8 MHz / 450 kHz
in cabinets.
Usable sensitivity
• VOC (Volatile Organic Compound)-free
30 µV
vegetable oil based ink is used for printing
the carton.
• Cushions made from paper.
54