Sony KV-HW212: x Selecting the picture and sound
x Selecting the picture and sound: Sony KV-HW212
Advanced Operations
x Selecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your
preference in the “Personal” option.
Selecting the picture mode
Press
to select the desired picture mode.
A/B
Select To view
1
2
3
4
5
6
“Dynamic” high contrast pictures.
7
8
9
“Standard” normal pictures.
0
PROG
“Soft” mild pictures.
“Personal” the last adjusted picture setting
from the “Picture Adjustment”
MENU
option in the menu (see page 18).
TV
Selecting the sound mode
Press
(or SOUND MODE on the top control panel) to select the desired sound
mode with a 5-Band Graphic Equalizer display.
Select To listen to
“Dynamic” dynamic and clear sound that emphasizes both the low
Dynamic
and high tones.
100 300 1k 3k 8k
“Drama” sound that emphasizes voice and high tones.
Drama
100 300 1k 3k 8k
“Soft” soft, natural and relaxing sounds.
Soft
100 300 1k 3k 8k
“Personal” the last adjusted sound setting from the
Personal
“Sound Adjustment” option in the menu (see page 20).
100 300 1k 3k 8k
12 Advanced Operations
01GB05AVD-Rus.p65 20/9/04, 3:26 PM12
x
Enjoying stereo or bilingual programs
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.
Viewing a stereo or bilingual program
When receiving a NICAM program
A/B
A/B
Broadcasting On-screen display (Selected sound)
1
2
3
4
5
6
NICAM
NICAM
t
Mono
7
8
9
stereo
(Stereo sound)
(Regular sound)
0
t
PROG
NICAM
NICAM Main
tt
NICAM Sub
Mono
bilingual
(Main sound)
(Sub sound)
(Regular sound)
MENU
t
NICAM
NICAM Main
t
Mono
monaural
(Main sound)
(Regular sound)
t
TV
When receiving an A2 program
Broadcasting On-screen display (Selected sound)
A2
Stereo
t
Mono
stereo
(Stereo sound)
(Regular sound)
t
A2
Main
t
Sub
bilingual
(Main sound)
(Sub sound)
t
Note
• If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound
becomes monaural but the noise is reduced.
Advanced Operations
13
01GB05AVD-Rus.p65 20/9/04, 3:26 PM13
x Viewing Teletext
Some TV stations broadcast an information service called Teletext which allows
you to receive various information, such as stock market reports and news.
You can use the buttons on the remote to view Teletext.
To Do this
display a Teletext Press . Each time you press , the
A/B
page on the screen changes as follows:
TV picture Teletext t Teletext and TV t TV.
1
2
3
If there is no Teletext broadcast, “100” is
4
5
6
displayed at the top left corner of the
7
8
9
screen.
0
,
PROG
check the contents Press .
of a Teletext service An overview of the Teletext contents,
including page numbers, appears on the
MENU
screen.
select a Teletext page Press the number buttons to enter the
three-digit page number of the desired
Teletext page. If you make a mistake,
(red,
reenter the correct page number. To
green,
access the next or previous page, press
yellow,
TV
or .
blue)
hold (pause) a Press to display the symbol “ ” at
Teletext display the top left corner of the screen. To
resume normal Teletext viewing, press
.
reveal concealed Press .
information (e.g., To conceal the information, press the
an answer to a quiz) button again.
enlarge the Teletext Press . Each time you press , the
display Teletext display changes as follows:
Enlarge upper half t Enlarge lower
half t Normal size.
stand by for a Teletext (1) Enter the Teletext page number that
page while watching you want to refer to, then press
.
a TV program (2) When the page number is displayed,
press
to show the text.
select a FASTEXT Press (red, green, yellow and blue)
menu or the colored that corresponds to the desired menu or
boxes page number.
turn off Teletext Press a.
Note
• The FASTEXT feature can be used only when the FASTEXT broadcast is available.
14 Advanced Operations
01GB05AVD-Rus.p65 20/9/04, 3:27 PM14
Menu Adjustment
x Introducing the menu system
The MENU button lets you open a menu and change the settings of your TV.
The following is an overview of the menu system.
Return icon
Picture icon
Name of the current
Sound icon
Setup
menu
Language: English
Timer icon
Picture Rotation
Menu level 3
Wide Mode:
Channel Setup icon
Video Label
Setup icon
Color System:
Menu level 2
Portable Audio Mode:
Menu level 1
Select
Confirm
End
User Guidance
Level 1
Level 2
Level 3/Function
Page
“Picture”
“Mode”
Select the picture mode:
18
“Dynamic” t “Standard” t “Soft” t “Personal”
“Picture Adjustment”
Adjust the “Personal” option:
“Picture” t “Brightness” t “Color” t
“Hue” t “Sharpness” t “Reset”
“Color Temperature”
Adjust white color tint:
“Cool” t “Neutral” t “Warm”
“Intelligent Picture”
Optimize picture quality:
“On” t “Off”
“Sound”
“Mode”
Select the sound mode:
19
“Dynamic” t “Drama” t “Soft” t “Personal”
“Sound Adjustment”
Adjust sound frequency settings of “Personal”
option:
“Adjust” t “Reset”
“Balance”
Select to emphasize the left and right speakers.
Adjust volume automatically:
“Intelligent Volume”
“On” t “Off”
Select the surround mode:
“Surround”
“On” t “Simulated” t “Off”
continue
Menu Adjustment
15
01GB05AVD-Rus.p65 20/9/04, 3:27 PM15
continued
Level 1
Level 2
Level 3/Function
Page
“Timer”
“Sleep Timer”
Set TV to turn off automatically.
21
“Wake Up Timer”
Set TV to turn on automatically.
“Channel Setup”
“Auto Program”
Preset channels automatically.
22
“Manual Program”
Preset channels manually.
“Program Label”
Label the program number.
“Program Block”
Block unwanted programs.
“Program Sorting”
Change the order in which the channels appear
on the screen.
“Setup”
“Language”
Change the menu language:
24
“English” t “ ”(Russian)
“Picture Rotation”
Adjust the picture position.
“Wide Mode”
Change the picture size:
“On” (16:9 wide-mode) t “Off”
Label the connected equipment.
“Video Label”
“Color System”
Select the color system:
“Auto” t “PAL” t “SECAM” t “NTSC3.58”
t “NTSC4.43”
“Portable Audio
Select the input connected to your audio
Mode”
equipment:
“Video1” t “Video2” t “Off”
16 Menu Adjustment
01GB05AVD-Rus.p65 20/9/04, 3:27 PM16
Channel Setup
Auto Program
Manual Program
Program Label
Program Block
Program Sorting
Select
Confirm
End
Menu Adjustment
17
Channel Setup
Auto Program
Manual Program
Program Label
Program Block
Program Sorting
Select
Confirm
End
How to use the menu
Press MENU to
display the menu.
Press V or v to select
the desired item.
TV
Press
(or b) to
confirm your
selection and
go to the next
level.
Other menu operations
To
Press
Adjust the setting value
V, v, B or b .
Move to the next/previous menu level
B or b.
Cancel the menu
MENU.
Tips
• If you want to exit from Menu level 2 to Menu level 1, press V or v until the return icon ( ) is
highlighted, then press
.
• The MENU, t and 2 +/– buttons on the top control panel can also be used for the
operations above (see page 9).
Note
• When a feature is dimmed in the menu, it is not selectable.
0
PROG
Picture
Mode: Dynamic
Picture Adjustment
Color Temperature: Cool
Intelligent Picture: On
MENU
Select
Confirm
End
01GB05AVD-Rus.p65 20/9/04, 3:27 PM17
x Changing the “Picture” setting
The “Picture” menu allows you to adjust the picture settings.
Press MENU.
1
Picture
Make sure the “Picture” icon (
) is
2
Mode: Dynamic
selected, then press
.
Picture Adjustment
Color Temperature: Cool
Intelligent Picture: On
Select
Confirm
End
Press V or v to select the desired item (e.g., “Mode”), then press
.
3
Select To
“Mode” choose either “Dynamic”, “Standard”, “Soft” or
“Personal”* (see page 12).
“Color Temperature” adjust white color tint.
Choose either “Cool” (blue tint), “Neutral” (neutral
tint) or “Warm” (red tint).
“Intelligent Picture” optimize picture quality.
Press V or v to select “On”, then press
.
To cancel, select “Off”, then press .
* You can adjust the setting to your personal preference in the “Picture Adjustment” and
“Color Temperature” options only when the “Personal” mode is selected.
Adjusting the “Picture Adjustment” items under
“Personal” mode
Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,
1
“Hue” (color tones) or “Sharpness”, then press
.
Selecting “Reset” will set your TV to the factory setting.
Press V,v,B or b to adjust the setting of your selected item, then press
.
2
Repeat the above steps to adjust other items.
3
The adjusted settings will be received when you select “Personal”.
Notes
• “Hue” can be adjusted for the NTSC color system only.
• Reducing “Sharpness” can also reduce picture noise.
18 Menu Adjustment
01GB05AVD-Rus.p65 20/9/04, 3:27 PM18
x Changing the “Sound” setting
The “Sound” menu allows you to adjust the sound settings.
Press MENU.
1
Press V or v to select the “Sound”
Sound
2
Mode:
Dynamic
icon (
), then press .
Sound Adjustment
Balance
Intelligent Volume:
Off
Surround: Off
Select
Confirm
End
Press V or v to select the desired item (e.g., “Mode”), then press
.
3
Select To
“Mode” choose either “Dynamic”, “Drama”, “Soft” or
“Personal”* (see page 12).
“Balance” Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
“Intelligent Volume” adjust the volume of all program numbers and
video inputs automatically.
Press V or v to select “On”, then press
.
To cancel, select “Off”, then press .
“Surround” choose either “On”, “Simulated” or “Off”
(see page 10).
* You can adjust the setting to your personal preference in the “Sound Adjustment”
option only when the “Personal” mode is selected (see page 20).
continue
Menu Adjustment
19
01GB06ADJ-Rus.p65 20/9/04, 3:27 PM19
20 Menu Adjustment
Adjustment: Personal
Adjust
Reset
100 300 1k 3k 8k
Select
Confirm
End
continued
Adjusting the “Sound Adjustment” item under
“Personal” mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of “Personal” mode in the menu.
Make sure that “Adjust” is selected,
1
then press
.
Selecting “Reset” will set your TV to
the factory setting.
Press B or b to select the desired sound frequency, then press V or v to
2
adjust the setting and press
.
The adjusted settings will be received when you select “Personal”.
Notes
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
• You may display the settings directly using the SOUND MODE button on the top control
panel (see page 9) or
button on the remote control (see page 11).
01GB06ADJ-Rus.p65 20/9/04, 3:27 PM20
x Changing the “Timer” setting
The “Timer” menu allows you to set TV to turn off and turn on automatically.
Press MENU.
1
Press V or v to select the “Timer” icon (
),
Timer
2
Sleep Timer: Off
then press
.
Wake Up Timer:
Off
Select
Confirm
End
Press V or v to select the desired item (e.g., “Sleep Timer”), then press
.
3
Select To
“Sleep Timer” set TV to turn off automatically.
Press V or v to select the desired period of time (max. of 1 hour
and 30 minutes), then press
.
“Wake Up Timer” set TV to turn on automatically.
Press V or v to select the desired period of time (max. of 12
hours), then press
. After the selected length of time, the TV
switches on automatically and “Wake Up Timer” will appear on
the screen.
The indicator on the TV lights up amber once you set the
“Wake Up Timer”.
Notes
•
You can also cancel “Sleep Timer” and “Wake Up Timer” by turning off the TV’s main power.
• If no buttons or controls are pressed for more than one hour after the TV is turned on using
the “Wake Up Timer”, the TV automatically goes into standby mode.
Menu Adjustment
21
01GB06ADJ-Rus.p65 20/9/04, 3:28 PM21
x C
hanging the “Channel Setup”
setting
The “Channel Setup” menu allows you to preset channels automatically,
manually preset channels, label the program number, block unwanted programs
and change the order of TV channels that appear on the screen.
Press MENU.
1
Press V or v to select the “Channel Setup”
Channel Setup
2
Auto Program
icon (
), then press .
Manual Program
Program Label
Program Block
Program Sorting
Select
Confirm
End
Press V or v to select the desired item (e.g., “Auto Program”), then press
.
3
Select To
“Auto Program” preset channels automatically.
“Manual Program” manually preset desired channels and channels that cannot be
preset automatically (see Presetting channels manually on
page 23).
“Program Label” label the program number.
(1) Select “Program” and press
.
Press V or v to select the program number, then press .
(2) Select “Label” and press . Press V or v to select
alphanumeric characters for the label, then press .
“Program Block” block unwanted programs.
(1) Select “Program” and press
.
Press V or v to select the program number, then press .
(2) Select “Block” and press , then press V or v to choose
either “On” or “Off”.
If you preset a blocked program number, that program number
will be unblocked automatically.
“Program Sorting”
change the order in which the channels appear
on the screen (see step 3 b) of the section “Initial Setup” in
page 7).
Notes
• You may label the program numbers so that you can see the program labels in the “Program
Sorting” menu.
• If you sort a blocked program, that program will remain blocked.
22 Menu Adjustment
01GB06ADJ-Rus.p65 20/9/04, 3:28 PM22
Presetting channels manually
After selecting “Manual Program”, select the program
1
number to which you want to preset a channel.
Manual Program
Program:
01
TV System:
D/K
(1) Make sure “Program” is selected, then press
.
VHF Low
Fine:
Auto
(2) Press V or v
until the program number you want
Skip:
Off
Signal Booster:
Auto
to preset appears on the menu, then press
.
Select
Confirm
End
Select the desired channel.
2
(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press
.
(2) Press V or v until the desired channel’s broadcast appears on the TV screen,
then press
.
If the sound of the desired channel is abnormal, select the appropriate TV
3
system.
(1) Press V or v
to select “TV System”, then press .
(2) Press V or v
until the sound becomes normal, then press .
If you are not satisfied with the picture and sound quality, you may be able
4
to improve them by using the “Fine” tuning feature.
(1) Press V or v
to select “Fine”, then press .
(2) Press V or v
to select “Manual”, then press .
(3)
Press V,v,B or b until the picture and sound quality are optimal, then press .
The + or – icon on the menu flashes while tuning.
If you want to skip this program number when using PROG +/–, you can
5
select the “Skip” feature.
(1) Press V or v
to select “Skip”, then press .
(2) Press V or v
to select “On”, then press .
To cancel, select “Off”, then press
.
If the TV signal is too strong (picture distorted; picture with lines; signal
6
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the “Signal Booster” feature.
(1) Press V or v
to select “Signal Booster”, then press .
(2) Press V or v
to select either “Off” (for picture distorted; picture with lines;
signal interference) or “Auto” (for snowy picture), then press
.
Menu Adjustment
23
01GB06ADJ-Rus.p65 20/9/04, 3:28 PM23
x C
hanging the “Setup” setting
The “Setup” menu allows you to change the menu language, adjust the picture
position, change the picture size, label the connected equipment, select the color
system and enjoy audio equipment sound.
Press MENU.
1
Press V or v to select the “Setup” icon
Setup
2
Language: English
(
), then press .
Picture Rotation
Wide Mode:
Off
Video Label
Color System:
Auto
Portable Audio Mode: Off
Select
Confirm
End
Press V or v to select the desired item (e.g., “Language”), then press
.
3
Select To
“Language” change the menu language.
Press V or v to select either “English” or “ ” (Russian),
then press .
“Picture Rotation”
adjust the picture position when it is not aligned with the TV screen.
Press B or b to adjust the picture position, then press .
“Wide Mode” choose either “On” or “Off” (see page 10).
“Video Label” label the connected equipment.
(1) Select “Video Input” and press
.
Press V or v to select the input you want to label, then press .
(2) Select “Label” and press , then press V or v to select the label
options: ”Video 1/Video 2/DVD”, “VCR”, “SAT”, “Game” or
“Edit”*.
* You may edit the video label. Press V or v to select alphanumeric
characters for the label, then press
.
“Color System” select the color system.
Press V or v to select either “Auto”, “PAL”, “SECAM”, “NTSC3.58”
or “NTSC4.43”, then press
. Normally, set this to “Auto”.
“Portable Audio
enjoy the sound of audio equipment through the TV speakers while
Mode” viewing picture from other inputs.
Press V or v to select the input connected to your audio equipment:
“Video1” or “Video2”, then press
. You may change the picture
while listening to the fixed audio input.
To cancel Portable Audio Mode, select “Off” or turn off the TV.
24 Menu Adjustment
01GB06ADJ-Rus.p65 20/9/04, 3:28 PM24
Additional Information
x Connecting the 3D WOOFER
B KV-HW212M95 only
You can enjoy high quality sound by connecting the 3D WOOFER as follows:
Step 1
3D WOOFER
Step 2
Black
Red wire
wire
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D
WOOFER wire strands stick out, making contact with the neighbouring 3D WOOFER terminal.
x Connecting optional components
Connecting to the video input terminal ( t )
Audio/Video cable
(not supplied)
TV front panel
2
Camcorder
Audio cable
L
(MONO)
R
(not supplied)
TV rear panel
Walkman
Antenna cable
1
(not supplied)
Y
C
B
Audio/Video cable
(MONO) (MONO)
L
L
(not supplied)
C
R
R
R
VCR
Note
• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV (see page 23).
Additional Information
25
01GB07ADJ-Rus.p65 20/9/04, 3:28 PM25
Connecting to the monitor output terminal ( T )
TV rear panel
Audio system
1
Y
C
B
(MONO) (MONO)
L
L
Audio/Video
C
cable
R
R
R
(not supplied)
VCR
Connecting to the component video input terminal ( )
TV rear panel
1
Component video
Y
cable
(not supplied)
C
B
(MONO) (MONO)
L
L
C
R
DVD player
R
R
Audio cable
(not supplied)
Notes
• If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to
(component video input) on your TV. Your TV can receive
either 525i/60Hz or 625i/50Hz interlace signals.
• Some DVD player terminals may be labeled differently:
Connect To (on the DVD player)
Y (green) Y
CB (blue) CB, PB, Cb or B-Y
CR (red) CR, PR, Cr or R-Y
• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
26 Additional Information
01GB07ADJ-Rus.p65 20/9/04, 3:28 PM26
