Главная > Инструкция к Телевизору Sony KDL-40 Z4500 > Precautions

Sony KDL-40 Z4500: Precautions

Precautions: Sony KDL-40 Z4500

Disposal of the TV set

Precautions

Disposal of Old Electrical &

Electronic Equipment

Viewing the TV

(Applicable in the European

s View the TV in moderate light, as viewing the TV in poor light

or during long period of time, strains your eyes.

Union and other European

s When using headphones, adjust the volume so as to avoid

countries with separate

excessive levels, as hearing damage may result.

collection systems)

LCD Screen

This symbol on the product or on its packaging

s Although the LCD screen is made with high-precision

indicates that this product shall not be treated

technology and 99.99% or more of the pixels are effective,

as household waste. Instead it shall be handed over to the applicable

black dots may appear or bright points of light (red, blue, or

collection point for the recycling of electrical and electronic

green) may appear constantly on the LCD screen. This is a

equipment. By ensuring this product is disposed of correctly, you

structural property of the LCD screen and is not a malfunction.

will help prevent potential negative consequences for the

s Do not push or scratch the front filter, or place objects on top of

environment and human health, which could otherwise be caused

this TV set. The image may be uneven or the LCD screen may

by inappropriate waste handling of this product. The recycling of

be damaged.

materials will help to conserve natural resources. For more detailed

s If this TV set is used in a cold place, a smear may occur in the

information about recycling of this product, please contact your

picture or the picture may become dark. This does not indicate

local Civic Office, your household waste disposal service or the

a failure. These phenomena disappear as the temperature rises.

shop where you purchased the product.

s Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

Disposal of waste batteries

s The screen and cabinet get warm when this TV set is in use.

This is not a malfunction.

(applicable in the European

s The LCD screen contains a small amount of liquid crystal.

Union and other European

Some fluorescent tubes used in this TV set also contain

countries with separate

mercury. Follow your local ordinances and regulations for

disposal.

collection systems)

This symbol on the battery or on the packaging

Handling and cleaning the screen surface/

indicates that the battery provided with this

cabinet of the TV set

product shall not be treated as household

Be sure to unplug the mains lead connected to the TV set from

waste. By ensuring these batteries are disposed

mains socket before cleaning.

of correctly, you will help prevent potentially negative

consequences for the environment and human health which could

To avoid material degradation or screen coating degradation,

otherwise be caused by inappropriate waste handling of the battery.

observe the following precautions.

The recycling of the materials will help to conserve natural

s To remove dust from the screen surface/cabinet, wipe gently

resources. In case of products that for safety, performance or data

with a soft cloth. If dust is persistent, wipe with a soft cloth

integrity reasons require a permanent connection with an

slightly moistened with a diluted mild detergent solution.

incorporated battery, this battery should be replaced by qualified

s Never use any type of abrasive pad, alkaline/acid cleaner,

service staff only. To ensure that the battery will be treated

scouring powder, or volatile solvent, such as alcohol, benzene,

properly, hand over the product at end-of-life to the applicable

thinner or insecticide. Using such materials or maintaining

collection point for the recycling of electrical and electronic

prolonged contact with rubber or vinyl materials may result in

equipment. For all other batteries, please view the section on how

damage to the screen surface and cabinet material.

to remove the battery from the product safely. Hand the battery over

s Periodic vacuuming of the ventilation openings is

to the applicable collection point for the recycling of waste

recommended to ensure to proper ventilation.

batteries. For more detailed information about recycling of this

s When adjusting the angle of the TV set, move it slowly so as to

product or battery, please contact your local Civic Office, your

prevent the TV set from moving or slipping off from its table

household waste disposal service or the shop where you purchased

stand.

the product.

Optional Equipment

Keep optional components or any equipment emitting

electromagnetic radiation away from the TV set. Otherwise picture

distortion and/or noisy sound may occur.

Remote and TV Controls/Indicators

Remote and TV controls

0 8 7 8 ,qj 8 ,qf

A button or touch sensors on the TV will work the same as those on

the remote.

* In the TV menu, these touch sensors will work as F/f/G/g/ .

•The number 5, N, PROG + and AUDIO buttons on the remote have a

tactile dot. Use the tactile dots as a reference when operating the TV.

Button Description

1 TV "/1 (TV

Press to turn the TV on and off from standby mode.

standby)

2 1 (Power) Press to turn the TV on or off.

• To disconnect the TV completely, turn off the TV,

then unplug the mains lead from the mains.

3 (Screen

Press to change the screen format (page 17).

mode)

4 AUDIO In analogue mode: Press to change the dual sound

mode (page 41).

In digital mode: Press to change the language to be

used for the programme currently being viewed

(page 49).

5 (Subtitle

Press to change the subtitle language (page 48) (in

setting)

digital mode only).

Button Description

6 / (Info/

In digital mode: Displays details of the programme

Text reveal)

currently being viewed.

In analogue mode:

Displays information. Press once

to display the current channel number and screen

mode. Press again to display clock information. Press

a third time to remove the display from the screen.

In Text mode (page 17): Reveals hidden

information (e.g. answers to a quiz).

7 / (Input

In TV mode: Press to display a list of inputs

select/Text

(page 26).

hold)

In Text mode: Press to hold the current page.

F/f/G/g/ Press F/f/G/g to move the on-screen cursor. Press

to select/confirm the highlighted item.

When playing a photo file: Press to pause/start a

slideshow. Press F/G to select the previous file.

Press f/g to select the next file.

When playing a music file: Press to pause/start

the playback. Press and hold G/g to fast forward/

fast reverse, then release the button at the point

where you want to resume playback. Press F to

start playback from the beginning of the current

file. Press f to go to the next file.

9 OPTIONS Press to display a list that contains “PAP”

(page 26), “PIP” (page 27), “Device Control”, or

shortcuts to some setting menus. Use the “Device

Control” menu to operate equipment that is

compatible with control for HDMI.

The listed options vary depending on the input

source.

0 HOME Press to display the TV Home menu (page 38).

qa Coloured

When the coloured buttons are available, an

buttons

operation guide appears on the screen. Follow the

operation guide to perform a selected operation.

qs Number

In TV mode: Press to select channels. For channel

buttons

numbers 10 and above, press the second and third

digits in quick succession.

In Text mode: Press to enter a page number.

Press to display the digital favourite list that you

(Favourite)

have specified (page 22).

qf PROG +/–/

In TV mode: Press to select the next (+) or

previous (–) channel.

In Text mode: Press to select the next ( ) or

previous ( ) page.

qg (Previous

Press to return to the channel that was last viewed

channel)

(for more than five seconds).

(Continu ed)

Button Description

qh % (Mute) Press to mute the sound. Press again to restore the

sound.

• In standby mode, if you want to turn on the TV

without sound, press this button.

qj 2 +/–

Press to adjust the volume.

(Volume)

qk / (Text) Press to display text information (page 17).

ql RETURN / Press to return to the previous screen of the

displayed menu.

When playing a photo/music file: Press to stop the

playback. (The display returns to the file or folder

list.)

w; GUIDE /

Press to display the Digital Electronic Programme

(EPG)

Guide (EPG) (page 18, 21).

wa ANALOG Press to display the analogue channel that was last

viewed.

ws DIGITAL Press to display the digital channel that was last

viewed.

wd THEATRE You can set Theatre Mode to on or off. When

Theatre Mode is set to on, the optimum audio

output (if the TV is connected with an audio

system using an HDMI cable) and picture quality

for film-based contents are automatically set.

• If you turn the TV off, Theatre Mode is also

turned off.

• “Control for HDMI” (BRAVIA Sync) is only

available with the connected Sony equipment that

has the BRAVIA Sync or BRAVIA Theatre Sync

logo or is compatible with control for HDMI.

wf SYNC MENU Displays the menu of connected HDMI equipment.

While viewing other input screens or TV

programmes, “HDMI Device Selection” is

displayed when the button is pressed.

• “Control for HDMI” (BRAVIA Sync) is only

available with the connected Sony equipment that

has the BRAVIA Sync logo or is compatible with

control for HDMI.

wg (Light) Press to illuminate the buttons on the remote so

that you can see them easily even if the room is

dark.

wh Buttons for

You can operate the equipment connected to the

using

TV (page 24, 30, 31).

optional

equipment

Indicators

Indicator Description

1 (Picture Off/Timer

Lights up in green when the picture is switched off (page 41).

indicator)

Lights up in orange when the reminder is set (page 19, 21) or the timer is

set (page 43).

2 1 (Standby indicator) Lights up in red when the TV is in standby mode.

3 " (Power indicator) Lights up in green when the TV is turned on.

4 Light Sensor Do not put anything over the sensor, as its function may be affected.

5 Remote control sensor Receives IR signals from the remote.

Do not put anything over the sensor, as its function may be affected.

• Make sure that the TV is completely turned off before unplugging the mains lead. Unplugging the mains lead

while the TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction.

• Do not put anything over the indicators as their functions may be affected.

1 2 3 4 5

Watching TV

1 Press 1 on the TV to switch on the TV.

Watching TV

When the TV is in standby mode (the 1

(standby) indicator on the TV (front) is

red), press TV "/1 on the remote to switch

on the TV.

2 Press DIGITAL to switch to digital mode

or ANALOG to switch to analogue mode.

The channels available vary depending on

the mode.

3 Press the number buttons or PROG +/– to

select a TV channel.

To select channel numbers 10 and above

using the number buttons, enter the

second and third digits within two

seconds.

To select a digital channel using the

Guide, see page 18 or 21.

In digital mode

An information banner appears briefly.

The following icons may be indicated on

the banner.

: Radio service

: Scrambled/Subscription service

: Multiple audio languages available

: Subtitles available

: Subtitles available for the hearing

impaired

: Recommended minimum age for current

programme (from 4 to 18 years)

: Parental Lock

Additional operations

To Do this

Turn on the TV from

Press %. Press 2 +/– to

Standby mode

set the volume level.

without sound

Adjust the volume Press 2 + (increase)/

– (decrease).

To access Text

Press /. Each time you press /, the display

• Some characters and/or letters at the top and the

changes cyclically as follows:

bottom of the picture may not be visible in Smart

Text t Text over the TV picture (mix mode)

mode. In such a case, you can select “Vertical

Size” using the “Screen Settings” (page 43) menu

t No Text (exit the Text service)

and adjust vertical size to make it visible.

To select a page, press the number buttons or

PROG +/–.

• When “Auto Format” is set to “On”, the TV will

To hold a page, press / .

automatically select the best mode to suit input

To reveal hidden information, press / .

signal.

Watching TV

• You can adjust the position of the picture when

• When four coloured items appear at the bottom of

selecting “Smart”, “14:9” or “Zoom.” Press F/f

the Text page, Fastext is available. Fastext allows

to move up or down (e.g. to read subtitles).

you to access pages quickly and easily. Press the

corresponding coloured button to access the page.

Using the Options menu

Press OPTIONS to display the following

To change the screen format manually

options when viewing a TV programme.

Press repeatedly to select the desired screen

Options Description

format.

Picture Mode See page 39.

Smart*

Sound Mode See page 40.

Displays conventional

Surround See page 40.

4:3 broadcasts with an

imitation wide screen

Speaker See page 45.

effect. The 4:3 picture

Motionflow See page 42.

is stretched to fill the

Subtitle Setting (in

See page 48.

screen.

digital mode only)

4:3

Sleep Timer See page 43.

Displays conventional

Power Saving See page 41.

4:3 broadcasts (e.g.

System Information

See page 50.

non-wide screen TV)

(in digital mode only)

in the correct

proportions.

Wide

Displays wide screen

(16:9) broadcasts in

the correct

proportions.

Zoom*

Displays

cinemascopic (letter

box format)

broadcasts in the

correct proportions.

14:9*

Displays 14:9

broadcasts in the

correct proportions.

As a result, black

border areas are

visible on the screen.

* Parts of the top and bottom of the picture may be cut off.

Using GUIDE Plus+™ System

and the Digital Electronic

Programme Guide (EPG)

* Condition you can set-up this feature:

– in UK, Italy, France, Germany or Spain.

– you can receive digital broadcasting.

– when “Antenna” is selected in step 7 of “ 5: Performing the initial set-up.”

** This function may not be available in some countries/regions.

Using GUIDE Plus+

Use GUIDE Plus+ system to find the show that you want to watch. The feature allows you to search

for shows by programme categories and by keyword. The GUIDE Plus+ programme provides up to

eight days of TV programming information. Be sure to complete the initial set-up on page 6 to use

this service.

GUIDE Plus+ System Components

GUIDE Plus+ logo

Branding partner logo

Sky

29-May 07:15

Go to AdRemind Top

Action bar

Video

Arthur : Animation following the adventures of a young aardvark and his friends.

window

Buster discovers the joy of growing your own vegetables.

Information

BBC2 8:00-8:30

box

Grid

Search My TV Schedule Set-up

Menu bar

Thu, 29 7:00 7:30 8:00

8:30

Breakfast

Information

Breakfast

panels

In the Night Garden Cbeebies Springwatch Arthur

GMTV Today

Freshly Squeezed Everybody loves Ray... Just Shoot Me

Channel

The Adve...

Rupert B...

Roary th... Make Wa... Fifi and t... Tomas ...

logo and

Spendaholics Greek

programme

Emmerd... The Montel Williams Show

Sally Jessy Raphael

title

Anything Goes

• Image shown above varies depending on country/region.

• Information panels is not Sony provided, adverts from Branding Partner.

• The function of action bar varies with cursor location and when in settings.

1 Press GUIDE.

2 Perform the desired operation as shown in the following table or displayed on the screen.

To Do this

View a programme Press F/f/G/g to select a programme, then press .

• The programme information will appear in the information box.

• Press / to access the extended information box for a long

synopsis.

• You can use PROG+/– to page up/down through the listings.

Press BRAVIA sync m/M to go to the next day or one day back.

Turn off the TV Guide Press GUIDE to exit TV Guide.

To Do this

Set a programme to be displayed

Press F/f/G/g to select a future programme you want to watch, then

automatically on the screen when it

press the green button.

starts

– Reminder

• To cancel a reminder, press red button when the reminder is

highlighted or use “Schedule” on the menu bar.

• If you switch the TV to standby mode, it will automatically turn

itself on when the programme is about to start.

Menu bar Press F repeatedly to access the menu bar.

Press G/g to select area. (“Grid”, “Search”, “My TV”, “Schedule”

Watching TV

and “Set-up”)

You can view a programme or set a reminder in “Grid” area.

Search a programme

You can quickly and easily find something of interest to watch or to

– Search

set a reminder by category (e.g. Sport) or subcategory (e.g. Football)

of a programme.

1 Highlight “Search” on the menu bar, then, press f only one

time.

2 Press F/f/G/g to select a category or subcategory, then press

Search your own keyword

In addition to the standard categories and sub-categories, you can set

– My Choice

your own search keywords.

1 Highlight “My Choice” in the “Search” area on the menu bar.

2 Press yellow button to add a keyword, then the virtual keyboard

appears.

3 Use the virtual keyboard to enter your keyword.

4 Confirm with the green button.

5 Your personal keyword appears in the “My Choice.”

6 Select your keyword and press to start a search according to

your personal keyword.

Set a Profile and receive

The “My TV” area allows you to set up a personal profile.

recommendations according to your

You can define a personal profile by channels, categories and/or by

preferences

keywords.

– My TV

The “My TV” area is making recommendations to you to quickly and

easily find something of interest to watch or to set a reminder.

How to set your profile:

1 Highlight “My TV” on the menu bar, press the green button to

set your profile.

2 Press F/f to select channels, categories or keywords.

3 Press the yellow button to add a channel, a category or a

keyword to your profile.

4 Press F/f/G/g to select a channel, a category or a keyword, then

press .

5 Repeat step 2 to 4 to add more items.

6 Press to activate your profile.

• You can delete or edit with the red and green buttons.

Delete and edit reminder

1 Highlight “Schedule” on the menu bar.

– Schedule

2 Press F/f to delete or edit with the red and green buttons.

• When no reminder is set, “No programmes” is displayed. Press g to

highlight “Frequency” (e.g.weekly) or “Timing” (e.g.reminder

timing:10 min early), you can change this settings by pressing

colour buttons.

(Continu ed)

To Do this

Configure the GUIDE Plus+ system

1 Highlight “Set-up” on menu bar.

according to your personal situation

2 Press F/f for you to select below items you want to configure.

– Set-up

“Personal Preferences”: You can change the on screen language,

change reminder timing and set overnight download.

“Start Installation Sequence”: This feature provides an easy way to

restart your installation from scratch. This will delete all your current

TV listing data.

“Manual Data Download”: Update your TV listings immediately. If

the TV is switched off during several days, TV listings will not be

updated automatically. In this case, use this feature to update TV

listings.

“GUIDE Plus+ System Information” screen: Display GUIDE Plus+

system information. This screen is providing several values that are

helpful for troubleshooting.

Using the Digital Electronic Programme Guide (EPG) **

1 In digital mode, press GUIDE.

All Categories

Fri 16 Mar 11:35

To da y

13: 0012: 3012: 0011: 30

001 BBC ONE

Homes Under the Hammer Neighbours Afterlife

2 Perform the desired operation as shown in

002 BBC TWO

Ready Steady Cook Extraordinary People: Britains Iden... CSI: Crime Scene Inv...

003 ITV1

Dancing On Ice Exclusive Cracker

the following table or displayed on the

004 Channel 4

Sign Zone: Ancient Rome: The Rise a... The Jeremy Kyle... Homes Under th...

005 Five

House Law and Order: Special Victims U... PartyPoker.com Worl...

screen.

006 ITV2

Crime Hour: Midsomer Murders Vodafone TBA: L...

007 BBC THREE

BBC Learning Zone: Schools: World P... A Picture of Brit... Eastenders

008 BBC FOUR

ER Real Crime: The Truth About the... This is BBC FOUR

009 ITV3

Past Everybody Loves Raymond The Sharon Osb...

010 SKY THREE

Racing from Chepstow and Ascot Baseball Wedne... Trans World Sport

Category30 min ViewNextPrevious

Watching TV

** This function may not be available in some countries/regions.

To switch the GUIDE (Sony Guide or GUIDE Plus+), see page 50.

To Do this

Watch a programme Press F/f/G/g to select the programme, then press .

Turn off the Guide Press GUIDE.

Sort the programme information by

1 Press the blue button.

Using Optional Equipment

Connecting Chart

You can connect a wide range of optional equipment to your TV. Connecting cables are not

supplied.

123 4 5 6

Using Optional Equipment

A V

COMPONENT IN

DMPORT

PC IN

( SMARTLINK )

DC 5V

0.7A MAX

IN3

(Continu ed)

Connect to Input symbol on

Description

screen

1 /AV1 AV1 When you connect a decoder, the TV tuner outputs scrambled

signals to the decoder, and the decoder unscrambles the

signals before outputting them.

2 //

AV2 SmartLink is a direct link between the TV and a VCR/DVD

AV2

recorder.

(SMARTLINK)

3 /

Component The component video sockets support the following video

COMPONENT IN

inputs only: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p.

4 DMPORT DMPORT You can play audio or video (optional cable required) of a

portable audio player that is connected to the TV using a

DIGITAL MEDIA PORT (DMPORT) adaptor.

Depending on the connected DIGITAL MEDIA PORT

adaptor, you can operate the connected equipment using the

TV as follows;

– Using the remote of the TV: N/x/X/m/M/F/f/G/

g// RETURN.

– Using the Options menu function: Press OPTIONS, and

select “Control Panel” or “Device Control (Menu).”

• Do not connect or disconnect a DIGITAL MEDIA PORT

adapter while the TV is turned on.

• The connected equipment is not charged when the TV is turned

off or in standby mode.

5 HDMI IN 1 or 2 HDMI 1 or

Digital video and audio signals are input from the connected

HDMI 2

equipment.

In addition, when you connect the equipment that is

qs HDMI 3 HDMI 3

compatible with control for HDMI, communication with the

connected equipment is supported. See page 46 to set up this

communication.

If the equipment has a DVI socket, connect the DVI socket to

the HDMI IN socket through a DVI-HDMI adaptor interface

(not supplied), and connect the equipment’s audio out socket

to the audio in HDMI IN socket.

• The HDMI sockets support the following video inputs only:

480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p.

For PC video inputs, see page 55.

• Be sure to use only an authorised HDMI cable bearing the

HDMI logo.We recommend that you use a Sony HDMI

cable (high speed type).

• When connecting an audio system that is compatible with

control for HDMI, be sure to also connect it to the

DIGITAL AUDIO OUT (OPTICAL) socket.

6 LAN You can enjoy contents stored on DLNA-compatible devices

via a network (page 34).

7 /PC IN PC It is recommended to use a PC cable with ferrites, such as the

“Connector, D-sub 15” (ref. 1-793-504-11, available in Sony

Service Centre) or equivalent.

8 L- -R Connect to the audio output sockets to listen to the sound

from the TV on Hi-Fi audio equipment.

Use an optical audio cable.

DIGITAL AUDIO

OUT (OPTICAL)

Connect to Input symbol on

Description

screen

0 CAM

To use Pay Per View services.

(Conditional

For details, refer to the instruction manual supplied with your

Access Module)

CAM. To use the CAM, remove the dummy card from the

CAM slot, then turn off the TV and insert your CAM card

into the slot. When you are not using the CAM, we

recommend that you keep the dummy card in the CAM slot.

• CAM is not supported in all countries. Please check with

your authorised dealer.

qa USB You can enjoy photo/music files stored in a Sony digital still

camera or camcorder through a USB cable or USB storage

device on your TV (page 27).

qd /L- -R

AV3 When connecting mono equipment, connect to the AV3

AV3

L socket.

Using Optional Equipment

qf i You can listen to TV sound through headphones.

Options Description

Viewing Pictures from

PIP (in PC input

See page 27.

Connected Equipment

mode only)

PAP (except PC input

See page 26.

Switch on the connected equipment, then

mode and DIGITAL

perform one of the following operation.

MEDIA PORT

mode)

For equipment connected to the scart

Auto Adjustment (in

See page 44.

sockets using a fully-wired 21-pin scart lead

PC input mode only)

Start playback on the connected equipment.

Horizontal Shift (in

See page 44.

The picture from the connected equipment

PC input mode only)

appears on the screen.

Sleep Timer (except

See page 43.

PC input mode)

For an auto-tuned VCR/ DVD recorder

Power Saving See page 41.

In analogue mode, press PROG +/–, or the

Device Control

See page 24.

number buttons, to select the video channel.

(Menu) (in DIGITAL

MEDIA PORT mode

For a USB device

only)

See page 27.

Control Panel (in

See page 24.

DIGITAL MEDIA

For a Network device

PORT mode only)

See page 34.

Device Control (in

See page 30.

HDMI mode only)

For other connected equipment

Press / to display a list of connected

To view two pictures simultaneously

equipment. Press F/f to select the desired

– PAP (Picture and Picture)

input source, then press .

You can view two pictures (external input and

The highlighted item is automatically selected

TV programme) on the screen simultaneously.

if you do not perform any operation for two

Connect an optional equipment (page 23), and

seconds after pressing F/f.

make sure that images from the equipment

If you have set an input source to “Skip” in the

appear on the screen (page 26).

“AV Preset” menu (page 44), that input source

does not appear in the list.

• This function is not available for a PC input and

DIGITAL MEDIA PORT input.

• To return to normal TV mode, press DIGITAL or

• You cannot change the size of the pictures.

ANALOG.

• You cannot display analogue TV video in the TV

programme picture while displaying AV1, AV2 or

Using the Options menu

AV3 video in the external inputs picture.

Press OPTIONS to display the following

1 Press OPTIONS.

options when viewing pictures from connected

2 Press F/f to select “PAP”, then press .

equipment.

The picture from the connected equipment

Options Description

is displayed on the left, and the TV

Picture Mode (except

See page 39.

programme is displayed on the right.

PC input mode)

3 Press the number buttons or PROG +/– to

Display Mode (in PC

See page 39.

select the TV channel.

input mode only)

To return to single picture mode

Sound Mode See page 40.

Press RETURN.

Surround See page 40.

Speaker See page 45.

• The highlighted picture is audible. You can switch

Motionflow See page 42.

the audible picture by pressing G/g.

To view two pictures simultaneously

– PIP (Picture in Picture)

Playing Back Photo/Music

You can view two pictures (PC input and TV

via USB

programme) on the screen simultaneously.

You can enjoy photo/music files stored in a

Connect a PC (page 23), and make sure that

Sony digital still camera or camcorder through

image from a PC appear on the screen.

a USB cable or USB storage media on your

1 Press OPTIONS to display the Options

TV.

menu.

1 Connect a supported USB device to the

2 Press F/f to select “PIP”, then press .

TV.

The picture from the connected PC is

2 Press HOME.

displayed in full size, and the TV

3 Press G/g to select “Photo” or “Music.”

programme is displayed in the small

screen.

4 Press F/f to select a USB device, then

You can use F/f/G/g to move the TV

press .

Using Optional Equipment

programme screen position.

In “Music”, “List View” appears. In

3 Press number buttons or PROG +/– to

“Photo”, “Thumbnail View” appears.

select the TV channel.

Press the yellow button to switch between

To return to single picture mode

“List View” and “Thumbnail View.”

Press RETURN.

5 Press F/f/G/g to select a file or folder,

then press .

• You can switch the audible picture by selecting

When you select a folder, select a file,

“Audio Swap” from the Options menu.

then press .

Playback starts.

Photo Playback Auto Start

The TV automatically starts photo playback

when the TV is turned on and a digital still

camera or other device storing photo files is

connected to the USB port and then turned on

(page 41).

(Photo) Available Options

Option Description

Picture Mode See page 39.

Sound Mode See page 40.

Surround See page 40.

Cropping Crops a photograph.

Display map Displays a map of the

location where a photo

was shot along with the

photo itself.

Show Options Allows you to set repeat/

shuffle for photo

playback.

Photo Set-up Sets how playback should

be performed and what

effects to use during

slideshows.

Rotate and Save Rotates and saves

unprotected files.

(Continu ed)

Option Description

– RAW (ARW/ARW 2.0 format files with this

extension “.arw.”) For preview only.

Speaker See page 45.

• When you connect a Sony digital still camera, set

Picture Frame Image Allows you to select a

the camera’s USB connection mode to Auto or

photograph to be

“Mass Storage.” For more information about USB

displayed as picture

connection mode, refer to the instructions supplied

frame.

with your digital camera.

Information Displays information

• USB playback is supported for the following

about the device, folders,

music file formats:

and files.

– MP3 (files with the extension “.mp3” that have

not been copyrighted)

(Music) Available Options

• USB Photo Viewer supports FAT12, FAT16 and

FAT32 file systems.

Option Description

• Depending on the exact file specifications, some

Sound Mode See page 40.

files, including those modified on a PC, cannot be

Surround See page 40.

played even if the file format is supported.

• Check the website below for updated information

Add to Slideshow Registers the background

music to be played during

about compatible USB devices.

a slideshow using

http://support.sony-europe.com/TV/compatibility/

(Photo).

Omit from Slideshow Cancels the registered

To display a photograph

background music.

— Picture Frame

Playback Options Allows music options to

You can display a photograph on the screen

be set for repeat, shuffle,

for a selected period of time. After that period,

or regular playback.

the TV automatically switches itself into

Speaker See page 45.

standby mode.

Information Displays information

1 Select a photograph.

about the device, folders,

and files.

You can select a photograph from the

connected USB device or preset picture

folder. For details on selecting a

• Picture quality may appear coarse when using

photograph, see page 27.

(Photo) because images may be enlarged

depending on the file. Also, images may not fill

2 Press OPTIONS while the selected

the entire screen depending on the image size and

photograph is displayed, then press F/f to

aspect ratio.

select “Picture Frame Image” and press

• Some photo files may take some time to be

displayed when using (Photo).

• The file name and folder name support only

3 Press RETURN repeatedly to return

English.

to the Home Menu.

• While the TV is accessing the data on the USB

4 Press F/f/G/g to select “Photo”, then

device, observe the following:

– Do not turn off the TV or connected USB

select “Picture Frame” and press .

device.

The TV is switched to Picture Frame

– Do not disconnect the USB cable.

mode, and the selected photograph is

– Do not remove the USB device.

displayed on the screen.

The data on the USB device may be damaged.

To set the duration of displaying a

• Sony will not be held liable for any damage to, or

photograph

loss of, data on the recording media due to a

malfunction of any connected devices or the TV.

Press OPTIONS, then select “Duration”

• Playback does not start automatically if the TV is

and press . Then, select the duration,

turned on after connecting the digital still camera

and press .

or other device to the USB port.

The counter appears on the screen.

• USB playback is supported for the following

To return to the XMB™

photo file formats:

Press RETURN.

– JPEG (JPEG format files with the extension

“.jpg” and conforming to DCF 2.0 or Exif 2.21)

5 Select the following items using F/f and

• If the photograph is selected from a USB device, it

press , then set them using F/f.

must remain connected to the TV.

–Time Zone

• If “Sleep Timer” is activated, the TV

–DST

automatically will switch into standby mode.

6 Select “Yes”, then press .

To display a photograph with the

The GPS log files are loaded.

location on the map

7 Disconnect the GPS unit and connect the

When using an image capture device with GPS

device on which the photograph is stored.

function (digital still camera, etc.), it is

8 Select a photograph (page 27).

possible to display a photograph with a map of

the location where the photograph was taken

9 Press the green/red buttons to zoom in/out

using a function of GPS for recording

on the map.

longitude and latitude. Because map

information is downloaded from the Internet

Using Optional Equipment

online map service, the network connection

must be required and the TV has to be

connected to the network (page 34).

1 Select a photograph (page 27).

2 Press the green/red buttons to zoom in/out

on the map.

To change the display position of the map

on the TV screen, press the blue button

repeatedly.

• Because the Internet online map service is

provided by a third party, service may be changed

or terminated without prior notification to the

user.

• The position indicated on the map may differ

depending on the image capture device.

• Only a large-scale map that cannot be zoomed in

or out is displayed if the TV is not connected to

the Internet or the Internet online map service is

terminated.

• You can also display a slideshow with the location

on the map. Set “Photo Set-up” to “Simple with

map” (page 27).

• A map can be displayed in the case of

photograph’s EXIF data includes a date

information, and the associated longitude and

latitude information (“Log files”) has been

recorded using a Sony GPS unit. Follow the

procedure described below.

1 Connect the GPS unit to the USB port.

2 Press HOME.

3 Press G/g to select “Photo.”

4 Press F/f to select the GPS unit, then

press .

To make the control for HDMI settings

Using BRAVIA Sync with

The control for HDMI settings must be set on

Control for HDMI

both the TV side and connected equipment

side. See “HDMI Set-up” on page 46 for the

The control for HDMI function enables the TV

TV side settings. For settings on the connected

to communicate with the connected equipment

equipment, refer to the operating instructions

that is compatible with the function, using

for that equipment.

HDMI CEC (Consumer Electronics Control).

For example, by connecting Sony equipment

that is compatible with control for HDMI

(with HDMI cables), you can control them

together.

Be sure to connect the equipment correctly,

and make the necessary settings.

Control for HDMI

• Automatically turns the connected

equipment off when you switch the TV to

standby mode using the remote.

• Automatically turns the TV on and

switches the input to the connected

equipment when the equipment starts to

play.

• If you turn on a connected audio system

while the TV is on, the sound output

switches from the TV speaker to the audio

system.

• Adjusts the volume (2 +/–) and mutes the

sound (%) of a connected audio system.

• You can operate the connected Sony

equipment that has the BRAVIA Sync logo

by the TV remote by pressing:

– N/x/X/m/M to operate the connected

equipment directly.

– SYNC MENU to display the menu of the connected

HDMI equipment on the screen.

After displaying the menu, you can operate the

menu screen by using F/f/G/g and .

– OPTIONS to display “Device Control”, then select

options from “Menu”, “Options”, and “Content

List” to operate the equipment.

– Refer to the instruction manual of the equipment for

available control.

To connect the equipment that is

compatible with control for HDMI

Connect the compatible equipment and the TV

with a HDMI cable. When connecting an

audio system, be sure to also connect the

DIGITAL AUDIO OUT (OPTICAL) socket

of the TV and the audio system using an

optical audio cable. For details, see page 24.

Item Description

Operating Optional

1 "/1 Turns on or off the optional

Equipment using the TV

equipment you have selected

with the function buttons.

Remote

2 Function

Allows you to operate the

Buttons for using optional

buttons

corresponding equipment. For

details, see “Programming the

equipment

remote” on page 31.

For details, refer to the operating instructions

3 BD/DVD

• ./>: Goes to the

operating

beginning of the previous/

supplied with the connected equipment.

buttons

next title/chapter/scene/

track.

• / : Replays the scene/

briefly fast forwards the

scene.

• m/M: Fast reverses/fast

Using Optional Equipment

forwards the disc when

pressed during playback.

• N: Plays a disc at normal

speed.

• X: Pauses the playback.

• x: Stops the playback.

4 DVD record

• z REC: Starts the

buttons

recording.

• X REC PAUSE: Pauses the

recording.

• x REC STOP: Stops the

recording.

5 F1/F2 • Selects a disc when using a

disc changer.

• Selects a function when

using a combination unit

(e.g. a DVD/HDD).

6 BD/DVD

Displays the BD/DVD disc

menu.

7 BD/DVD

Displays the top menu of the

TOP MENU

BD/DVD disc.

Programming the remote

This remote is preset to operate Sony TVs, and

most Sony Blu-ray disc players, DVD players,

DVD recorders, and audio systems (Home

Theatre, etc.).

To control Blu-ray disc players, DVD players,

and DVD recorders of other manufacturers

•The N button has a tactile dot. Use the tactile dot

(and some other Sony models), programme the

as a reference when operating other equipment.

remote as follows.

• Before you start, look up the three-digit code of

your equipment from the “Manufacturer’s codes”

on page 32.

(Continu ed)

If your equipment is not working, or

some of the functions do not work

Enter the correct code or try the next code

listed for the brand. Note that the list may

not include codes for all models of all

brands.

To return to normal TV operation

Press the TV function button.

Manufacturer’s codes

DVD players

Manufacturer Code

SONY 001, 029, 030, 036 – 044, 053 – 055

AIWA 021

AKAI 032

DENON 018, 027, 020, 002

GRUNDIG 009, 028, 023, 024, 016, 003

HITACHI 025, 026, 015, 004, 035

JVC 006, 017

KENWOOD 008

LG 015, 014, 034

LOEWE 009, 028, 023, 024, 016, 003

MATSUI 013, 016

ONKYO 022, 033

PANASONIC 018, 027, 020, 002, 045 – 047

1 Press and hold the BD, DVD, or AMP

PHILIPS 009, 028, 023, 024, 016, 003, 031

function button you want to programme

PIONEER 004, 050, 051, 052

on the remote, then press .

SAMSUNG 011, 014

SANYO 007

The selected function button (BD, DVD,

SHARP 019, 027

or AMP) flashes.

THOMSON 012

2 Press the number buttons to enter the

TOSHIBA 003, 048, 049

YAMAHA 018, 027, 020, 002

three-digit manufacturer’s code number

when the function button flashes.

Blu-ray disc (BD) players

If you do not enter the code within 10

Manufacturer Code

seconds, you need to go back to step 1.

SONY 101 – 103

3 Press .

DVD/video cassette recorders

The selected function button flashes

Manufacturer Code

twice.

SONY 251

If the selected function button flashes five

times, repeat from step 1.

DVD/HDD recorders

4 Turn on your equipment and check that

Manufacturer Code

SONY 201 – 203

the following main functions work.

For Blu-ray disc players, DVD players

VCRs

and DVD recorders, check:

Manufacturer Code

N (playback), x (stop), m (rewind),

SONY 301 – 310, 362

M (fast forward), channel selection.

AIWA 325, 331, 351

For DVD players and DVD recorders,

AKAI 326, 329, 330

check:

DAEWOO 342, 343

GRUNDIG 358, 355, 360, 361, 320, 351, 366

TOP MENU/MENU and F/f/G/g.

HITACHI 327, 333, 334

JVC 314, 315, 322, 344, 352 – 354, 348,

349

Manufacturer Code

LG 332, 338

LOEWE 358, 355, 360, 361, 320, 351

MATSUI 356, 357

ORION 328

PANASONIC 321, 323

PHILIPS 311 – 313, 316 – 318, 358, 359, 363,

364

SAMSUNG 339 – 341, 345

SANYO 335, 336

SHARP 324

THOMSON 319, 350, 365

TOSHIBA 337

DAV Home Theatre Systems

Manufacturer Code

SONY (DAV) 401 – 404

Using Optional Equipment

AV receivers

Manufacturer Code

SONY 451 – 454

Digital terrestrial receivers

Manufacturer Code

SONY 501 – 504

Using Network Features

With this TV, you can enjoy contents stored on

DLNA-compatible devices on the home

Enjoying Photo/Music Files

network.

via the Network

Devices that store and provide contents, such

as photo/music files, is called “server.” The

You can enjoy photo/music files on the server

TV receives the photo/music files from the

easily by selecting an icon on the Home Menu

server via the network, and you can enjoy

of the TV.

them on the TV even in other rooms.

1 Press HOME.

To enjoy the home network, a DLNA-

2 Press G/g to select “Photo” or “Music.”

compatible device (VAIO, Cyber-shot, etc.) is

necessary as a server.

3 Press F/f to select a server, then press .

In “Music”, “List View” appears. In

“Photo”, “Thumbnail View” appears. You

Connecting the TV to the

can switch the view mode between “List

Network

View” and “Thumbnail View” by

pressing the yellow button.

When the server cannot be found

See “Checking the Network Connection”

(page 36) and “Adjusting the Server

Display Settings” (page 36).

4 Press F/f/G/g to select a file or folder,

then press .

When you select a folder, select a file,

then press .

Playback starts.

Network cable (not supplied)

• A map can be displayed with a photograph in the

case of longitude and latitude information has

been recorded to photograph’s EXIF data

(page 29).

Broadband router

• Depending on the network device, it may be

necessary to register the TV with the network

To network

devices

device.

Network cable (not supplied)

• Picture quality may appear coarse when using

(Photo) because images may be enlarged

depending on the file. Also, images may not fill

the entire screen depending on the image size and

DSL modem/

aspect ratio.

Cable modem

• Some photo files may take some time to be

displayed when using (Photo).

• The file name and folder name support only

English.

• To play files that are received from a network

device, they need to conform to one of the

Internet

following file formats.

– Still images: JPEG format

– Music: MP3 format or linear PCM format

Depending on the network device, the file format

Option Description

may be converted before transfer. In such cases,

Information Displays information

the file format resulting after conversion is used

about the device, folders,

for playback. For details, see the instruction

and files.

manual for the network device being used. Even

files conforming to one of the file formats given

(Music) Available Options

above cannot be played in some cases.

Option Description

To enjoy photographs and music on

Sound Mode See page 40.

the TV screen by operating devices

Surround See page 40.

– Renderer

Add to Slideshow Registers the background

“Renderer” is a feature for playing photo files

music to be played during

and music files stored in network devices

a slideshow using

(digital still cameras, mobile phones, etc.) on

(Photo).

the TV by operating the controller device in

Omit from Slideshow Cancels the registered

question. To use this feature, a renderer-

background music.

compatible device such as a digital still camera

Playback Options Allows music options to

or mobile phone is required as the controller.

be set for repeat, shuffle,

Refer as well to the instruction manual

or regular playback.

supplied with the controller.

Speaker See page 45.

1 Set “Renderer Function”, “Renderer

Information Displays information

Using Network Features

Access Control” and “Renderer Set-up” in

about the device, folders,

and files.

“Network Settings” if necessary

(page 50).

2 Play the file selected using the controller

on the TV.

The file is played on the TV over the

connected network.

Use the controller or the TV’s remote to

perform operations during playback.

(Photo) Available Options

Option Description

Picture Mode See page 39.

Sound Mode See page 40.

Surround See page 40.

Cropping Crops a photograph.

Display map Displays a map of the

location where a photo

was shot along with the

photo itself.

Show Options Allows you to set repeat/

shuffle for photo

playback.

Photo Set-up Sets how playback should

be performed and what

effects to use during

slideshows.

Rotate Rotates files.

Speaker See page 45.

Checking the Network

Adjusting the Server

Connection

Display Settings

Enter the respective (alphanumeric) values for

You can select home network servers to be

your router. The items that need to be set may

displayed on the Home Menu.

differ, depending on the Internet service

Up to 10 servers can be displayed on the Home

provider or the router. For details, refer to the

Menu automatically.

instruction manuals that have been provided

1 Set the server to allow connections from

by your Internet service provider or supplied

the TV.

with the router.

For details on settings on the server, refer

1 Press HOME.

to the Operating Instructions supplied

2 Press G to select “Settings.”

with the server.

3 Press F/f to select “Network Settings”,

2 Press HOME.

then press .

3 Press G/g to select “Settings.”

4 Select “Network”, then press .

4 Press F/f to select “Network Settings”,

5 Select “IP Address settings”, then press

then press .

5 Select “Server Display Settings”, then

6 Select an item, and press .

press .

When you select “DHCP (DNS

6 Select the server you want to display on

automatic)”

the Home Menu, then press .

Go to step 7.

7 Select “Yes”, then press .

When you select “DHCP (DNS manual)”

Set “Primary DNS”/“Secondary DNS”

To set the server not to be displayed on

using F/f/g and the number buttons.

the Home Menu

When you select “Manual”

In step 7, press F /f to select “No”, then press

Set the following items using F/f/g and

the number buttons.

• IP Address

Available Options (on the connected

• Subnet Mask

server settings display)

• Default Gateway

• Primary DNS/Secondary DNS

Option Description

If your ISP has a specific proxy server

Delete All Deletes all connected

setting

servers.

Press OPTIONS, then press F/f to select

Update List Updates the server list to

“Proxy Set-up” and press . Then enter

the latest information.

the settings.

Information Displays information

7 Press .

about the connected server

currently selected.

8 Press F/f to select “Test”, then press .

Delete Deletes the connected

9 Press G/g to select “Yes”, then press .

server currently selected.

The network diagnostic starts.

When the message “Connection

successful.” appears, press

RETURN repeatedly to exit.

If you cannot connect to your home

network

The TV can check if the server is being

correctly recognised.

1 Press HOME.

2 Press G/g to select “Settings.”

3 Press F/f to select “Network Settings”,

then press .

4 Select “Server Diagnostics”, then press

5 Select “Yes”, then press .

The server diagnostic starts.

When the server diagnostic is complete,

the diagnostic result list appears.

6 Select the server you want to confirm,

then press .

The diagnostic results of the selected

server appear.

Using Network Features

If the diagnostic results indicate a failure,

look up the possible causes and what to

do, and check connections and settings.

Using MENU Functions

Navigating through TV Home Menu (XMB™)

The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the

TV screen. The XMB™ is an easy way to select programming and adjust settings on your BRAVIA

TV.

1 Press HOME.

The TV Home menu appears on the screen.

Picture

Sound

Media Category Bar

Settings

Features

Set-up

Analogue Set-up

Digital Set-up

Category Object Bar

2 Press G/g to select the category.

Media category icon Description

Settings You can make advanced settings and adjustments. For details about

settings, see page 39.

Photo You can enjoy photo files via USB devices or the network (page 27, 34).

Music You can enjoy music files via USB devices or the network (page 27, 34).

Digital You can select a digital channel, favourite list (page 22), or Guide

(page 18, 21).

You can also select a channel using the number buttons or PROG +/–.

Analogue You can select an analogue channel.

You can also select a channel using the number buttons or PROG +/–.

To hide the list of analogue channels, set “Programme List Display” to

“Off” (page 46).

External Inputs You can select equipment connected to the TV.

To assign a label to an external input, see “AV Preset” (page 44).

3 Press F/f to select the item, then press .

4 Follow the instructions on the screen.

5 Press HOME to exit.

• The options you can adjust vary depending on the situation.

• Unavailable options are greyed out or not displayed.

Settings

Picture

Picture Mode Selects the picture mode except for PC input source. “Picture Mode” includes

options best suited for video and photographs, respectively. The options that can be

selected differ depending on the input source.

Vivid For enhanced picture contrast and sharpness.

Standard For standard picture. Recommended for home entertainment.

Cinema For viewing film-based content. Most suitable for viewing in

a theatre-like environment.

Photo-Vivid For viewing photographs. Enhances picture contrast and

sharpness.

Photo-Standard For viewing photographs. Provides the optimum picture

quality for viewing in the home.

Photo-Original For viewing photographs. Represents the picture quality used

when imaging developed photographs.

Display Mode (only in

Selects the display mode for PC input source.

PC Input/HDMI PC

Video For video images.

Input)

Text For text, charts or tables.

Reset Resets all picture settings except “Picture Mode” and “Display Mode” (only in PC

mode) to the factory settings.

Backlight Adjusts the brightness of the backlight.

Using MENU Functions

Contrast Increases or decreases picture contrast.

Brightness Brightens or darkens the picture.

Colour Increases or decreases colour intensity.

Hue Increases or decreases the green and red tones.

• “Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).

Colour Temperature Adjusts the whiteness of the picture.

Cool Gives the white colours a blue tint.

Neutral Gives the white colours a neutral tint.

Warm 1/Warm 2 Gives white colours a red tint. “Warm 2” gives a redder tint

than “Warm 1.”

• “Warm 1” and “Warm 2” are not available when “Picture Mode” is set to “Vivid”

(or “Photo-Vivid”).

Sharpness Sharpens or softens the picture.

Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal.

Auto Automatically reduces the picture noise (in analogue mode

only).

High/Medium/

Modifies the effect of the noise reduction.

Low

Off Turns off the “Noise Reduction” feature.

(Continu ed)

MPEG Noise

Reduces picture noise in MPEG-compressed videos. This is effective when

Reduction

viewing a DVD or digital broadcast.

Advanced Settings Allows you to set “Picture” settings in more detail. These settings are not available

when “Picture Mode” is set to “Vivid”(or “Photo-Vivid”).

Adv. Contrast

Automatically adjusts “Backlight” and “Contrast” to the most

Enhancer

suitable settings judging from the brightness of the screen.

This setting is especially effective for dark images scenes. It

will increase the contrast distinction of the darker picture

scenes.

Live Colour Makes colours more vivid.

Colour Space Changes the colour reproduction gamut. “Wide” reproduces

the vivid colour and “Standard” reproduces the standard

colour.

• “Live Colour” is not available when “Colour Space” is set to “Standard.”

“Noise Reduction”, “MPEG Noise Reduction” and “Advanced Settings” are not available for PC.

Sound

Sound Mode Selects the sound mode.

Dynamic Enhances the treble and bass sounds.

Standard For standard sounds.

Clear Voice Makes voice sound clearer.

Reset Resets all the sound settings to the factory settings excluding “Dual Sound.”

Treble Adjusts higher-pitched sounds.

Bass Adjusts lower-pitched sounds.

Balance Emphasises left or right speaker balance.

Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g., adverts

tend to be louder than programmes).

Volume Offset Adjusts the volume level of the current input relative to other inputs.

Woofer Level Adjusts the bass level to taste since the bass level varies depending on where the

television is located. Decrease the level if you feel too much bass is being output,

and increase the level if you feel not enough bass is being output.

• This adjustment is only necessary when the TV is first installed or when its

location has been changed. Adjustment is not required for regular listening.

Surround Live Sports Delivers surround effects that make you feel like you are

watching a live sports contest.

Music Hall Delivers surround effects that make you feel like you are

surrounded by sound as in a music hall.

Cinema Delivers surround effects just like the high-grade audio

systems found in movie theatres.

Custom A “Voice Zoom” adjustment can be stored according to taste.

Off Selects for normal stereo or mono reception.

Voice Zoom Adjusts the sound level of human voices. For example, if the voice of a news

announcer is indistinct, you can turn up this setting to make the voice louder.

Conversely, if you are watching a sports programme, you can turn down this

setting to soften the voice of the commentator.

Sound Booster Produces a fuller sound for more impact, by emphasising the treble and bass

sounds.

Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast.

Stereo/Mono For a stereo broadcast.

A/B/Mono For a bilingual broadcast, select “A” for sound channel 1, “B”

for sound channel 2, or “Mono” for a mono channel, if

available.

• If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”,

“A” or “B.”

• “Treble”, “Bass”, “Balance” and “Auto Volume” are not available when “Speaker” is set to “Audio System”

and headphones are connected.

Features

USB Auto Start Automatically starts photo playback when the TV is turned on and a digital still

camera or other device storing photo files is connected to the USB port and then

turned on.

Slideshow Select to view JPEG files as a slideshow.

Thumbnail View Select to view JPEG files as a thumbnail.

Off Select to disable this function.

• Playback does not start automatically if the TV is turned on after connecting the

digital still camera or other device to the USB port.

Using MENU Functions

Quick Start The TV turns on faster than usual within two hours after switching to standby

mode. However, power consumption in standby mode is 20 Watt higher than

usual.

Power Saving Selects the power saving mode to reduce the power consumption of the TV. When

“Picture Off” is selected, the picture is switched off and the (Picture Off)

indicator on the TV front panel lights up in green. The sound remains unchanged.

Standard Power Default settings.

Reduced Power Reduces the power consumption of the TV.

Picture Off Switches off the picture. You can listen to the sound with the

picture off.

Light Sensor On Automatically optimises the picture settings according to the

ambient light in the room.

Off Turns off the “Light Sensor” feature.

• Be sure not to put anything over the sensor, as its function may be affected. See

page 15 for the location of the light sensor.

Logo Illumination Lights up and turns off the Sony logo on the front of the TV.

Panel Key

Auto Touch sensor keys light up when you touch the sensor keys

Illumination

on the front of the TV or when the TV is on.

On Touch sensors are lit constantly.

(Continu ed)

Motionflow Provides smoother picture movement and reduces picture blur.

High Provides smoother picture movement such as for film-based

contents.

Standard Provides smooth picture movement. Use this setting for

standard use.

Off Use this setting when the “High” and “Standard” settings

result in noise.

• Depending on the video, you may not see the effect visually, even if you have

changed the setting.

Film Mode Provides an improved picture quality which is optimised for film when playing

DVD images taken on film.

Auto 1/Auto 2 “Auto 1” Provides smoother picture movement than the

original film-based content. “Auto 2” Provides the original

film-based content as is.

Off Turns off the “Film Mode” feature.

• If the image contains irregular signals or too much noise, “Film Mode” will be

automatically turned off even if “Auto 1/Auto 2” is selected.

• “Film Mode” is not available when “Video/Photo” is set to “Photo” or when

photograph is detected if “Video-A” is set.

Game/Text Mode Provides the optimum screen for viewing images with fine lines and characters that

are input from video game equipment and PCs. Set to “On” for the sharp display of

fine lines or characters.

Video/Photo Provides suitable image quality by selecting the option depending on the input

source (video or photograph data).

Video-A Sets suitable image quality, depending on the input source,

video data or photograph data when directly connecting Sony

HDMI output-capable equipment that supports “Video-A”

mode.

Video Produces suitable image quality for moving pictures.

Photo Produces suitable image quality for still images.

• The setting is fixed to “Video” when Video-A mode is not supported on the

connected equipment, even if “Video-A” is selected.

• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i

or 1080p.

x.v.Colour Displays moving pictures that is more faithful to the original source by matching

the colour space of source.

• The setting is fixed to “Normal” when the input signal is HDMI (RGB), even if

“x.v.Colour” is selected.

• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 720p,

1080i or 1080p.

Photo Colour Space Selects the option (sRGB, sYCC, Adobe RGB) to match the output colour space

within the output signal from the equipment connected to the HDMI, component

input jacks or USB.

• Select “sYCC” when using the equipment that supports “x.v.Colour.”

• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i

or 1080p.

• Not available when “Colour Space” is set to “Wide” (page 40).

Timer Settings Sets the timer to turn on/off the TV.

Sleep Timer Sets a period of time after which the TV automatically

switches itself into standby mode.

When the “Sleep Timer” is activated, the (Timer) indicator

on the TV (front) lights up in orange.

• If you switch off the TV and switch it on again, “Sleep

Timer” is reset to “Off.”

• A notification message appears on the screen one minute

before the TV switches to standby mode.

On Timer

On Timer Sets the timer to turn on the TV from

Settings

standby mode.

Timer Mode Sets the desired day(s) of the week you

want the timer to turn on the TV.

Time Sets the time to turn on the TV.

Duration Sets how long you want the TV to stay on

before switching to standby mode again.

Clock Set Allows you to adjust the clock manually. When the TV is

receiving digital channels, the clock cannot be adjusted

manually since it is set to the time code of the broadcasted

signal.

Set-up

Auto Start-up Starts the “first time operation menu” to select the language, country and location,

Using MENU Functions

and tune in all available digital and analogue channels. Usually, you do not need to

do this operation because the language and country/region will have been selected

and channels already tuned when the TV was first installed (page 6). However, this

option allows you to repeat the process (e.g., to retune the TV after moving house,

or to search for new channels that have been launched by broadcasters).

Language Selects the language in which the menus are displayed.

Screen Settings Screen Format See “To change the screen format manually” on page 17.

Auto Format Automatically changes the screen format according to the

input signal. To keep your setting, select “Off.”

Display Area Adjusts the picture display area in 1080i/p and 720p sources

when “Screen Format” is set to “Wide.”

Auto During digital broadcasts, displays

pictures in accordance with the settings

recommended by the broadcast station.

Full Pixel Displays pictures in their original size.

Normal Displays pictures in their recommended

size.

Horizontal Shift Adjusts the horizontal position of the picture.

Vertical Shift Adjusts the vertical position of the picture when “Screen

Format” is set to “Smart”, “Zoom” or “14:9.”

Vertical Size Adjusts the vertical size of the picture when “Screen Format”

is set to “Smart”, “Zoom” or “14:9.”

(Continu ed)

PC Settings Screen Format Selects a screen format for displaying input from your PC.

Full 1 Enlarges the picture to fill the vertical

display area, keeping its original

horizontal-to-vertical aspect ratio.

Full 2 Enlarges the picture to fill the display

area.

Reset Resets the PC screen settings to the factory settings.

Auto Adjustment Automatically adjusts the display position, phase and pitch of

the picture when the TV receives an input signal from the

connected PC.

• “Auto Adjustment” may not work well with certain input

signals. In such cases, manually adjust “Phase”, “Pitch” and

“Horizontal Shift.”

Phase Adjusts the phase when the screen flickers.

Pitch Adjusts the pitch when the picture has unwanted vertical

stripes.

Horizontal Shift Adjusts the horizontal position of the picture.

Power

Switches the TV to standby mode if no signal is received for

Management

30 seconds in the PC input.

AV Set-up AV Preset Assigns a name to any equipment connected to the side and

rear sockets. The name will be displayed briefly on the screen

when the equipment is selected. You can skip an input source

that is not connected to any equipment.

1 Press F/f to select the desired input source, then press

2 Press F/f to select the desired option below, then press

-, CABLE, SAT,

Uses one of the preset labels to assign a

VCR, DVD/BD,

name to connected equipment.

GAME, AUDIO

SYSTEM, CAM,

Edit Creates your own label.

1 Press F/f to select the desired letter

or number (“_” for a blank space),

then press g.

If you input a wrong character

Press G/g to select the wrong

character. Then, press F/f to select

the correct character.

2 Repeat the procedure in step 1 until

the name is completed.

3 Select “OK”, then press .

Skip Skips an input source that is not

connected to any equipment when you

press F/f to select the input source.

AV2 Input Sets a signal to be input through the socket labelled /

/ AV2 on the rear of the TV.

Auto Switches automatically among the signals

of RGB input, S video input, Composite

video input depending on the input

signal.

RGB Inputs the RGB signal.

S Video Inputs the S Video signal.

Composite Inputs the Composite video signal.

AV2 Output Sets a signal to be output through the socket labelled /

/ AV2 on the rear of the TV. If you connect a

VCR/ DVD recorder or other recording equipment to the

/ / AV2 socket, you can then record from the

equipment connected to other sockets of the TV.

TV Outputs a broadcast.

Auto Outputs whatever is being viewed on the

screen (except signals from the HDMI IN

1, HDMI IN 2, HDMI IN 3, /

COMPONENT IN and / PC IN

sockets).

Speaker Turns on/off the TV’s internal speakers.

TV Speaker The TV speakers are turned on in order to

listen to the TV’s sound through the TV

speakers.

Audio System The TV speakers are turned off in order

to listen to the TV’s sound only through

your external audio equipment connected

to the audio output sockets. When

Using MENU Functions

connected with “Control for HDMI”

compatible equipment, you can turn the

connected equipment on interlocked with

the TV. This setting must be made after

connecting the equipment.

Audio Out Variable The audio output from your audio system

can be controlled by the TV’s remote.

Fixed The audio output of the TV is fixed. Use

your audio receiver’s volume control to

adjust the volume (and other audio

settings) through your audio system.

• “Audio Out” is not available for audio system connected to the TV using the

HDMI sockets.

(Continu ed)

HDMI Set-up This is used to set the “Control for HDMI” compatible equipment connected to the

HDMI sockets. Note that the interlock setting must also be made on the connected

“Control for HDMI” compatible equipment side.

Control for HDMI This sets whether to interlock the “Control for HDMI”

compatible equipment and the TV. When set to “On”, the

following menu items can be performed. However, power

consumption in standby mode is higher than usual. If the

specific Sony equipment that is compatible with “Control for

HDMI” is connected, this setting is applied to the connected

equipment automatically when the “Control for HDMI” is set

to “On” using the TV.

Auto Devices Off When this is set to “On”, the “Control for HDMI” compatible

equipment turns off when you switch the TV to standby mode

using the remote.

Auto TV On When this is set to “On” and if the connected HDMI, control

compatible equipment is turned on, the TV automatically

turns on, and the displays the HDMI input from the

connected equipment.

Tuner Box

If set to “Advanced”, you can select a channel tuned by

Control

connected equipment using the TV’s remote.

Device List

Creates or updates the “HDMI Device List.” Up to 14

Update

“Control for HDMI” compatible equipment can be

connected, and up to 4 equipment can be connected to a

single socket. Be sure to update the “HDMI Device List”

when you change the “Control for HDMI” compatible

equipment connections or settings. Select them manually one

by one until getting a correct picture for several seconds.

HDMI Device List Displays the connected “Control for HDMI” compatible

equipment.

• You cannot use “Control for HDMI” if the TV operations

are linked to the operations of an audio system that is

compatible with control for HDMI.

Product Information Displays your TV’s product information.

All Reset Resets all settings to the factory settings and then displays the “Auto Start-up”

screen.

• Be sure not to turn the TV off during this period (it takes about 30 seconds) or

press any buttons.

• All settings, including digital favourite list, country, language, auto tuned

channels, etc. will be reset.

Analogue Set-up

Programme List

Select “Off” to hide the list of analogue channels from the XMB™

Display

(XrossMediaBar).

Auto Tuning Tunes in all the available analogue channels.

This option allows you to retune the TV after moving house, or to search for new

channels that have been launched by broadcasters.

Programme Sorting Changes the order in which the analogue channels are stored on the TV.

1 Press F/f to select the channel you want to move to a new position, then press

2 Press F/f to select the new position for your channel, then press .

Manual Programme

Before selecting “Label/AFT/Audio Filter/LNA/Skip/Decoder”, press PROG +/–

Preset

to select the programme number with the channel. You cannot select a programme

number that is set to “Skip” (page 44).

System/Channel Presets programme channels manually.

1 Press F/f to select the programme number you want to

manually tune (if tuning a VCR/ DVD recorder, select

channel 00), then press .

2 Press F/f to select “System”, then press .

3 Press F/f to select one of the following TV broadcast

systems, then press .

B/G: For western European countries/regions

I: For the United Kingdom

D/K: For eastern European countries/regions

L: For France

4 Press F/f to select “Channel”, then press .

5 Press F/f to select “S” (for cable channels) or “C” (for

terrestrial channels), then press g.

6 Tune the channels as follows:

If you do not know the channel number

(frequency)

Press F/f to search for the next available channel. When

a channel has been found, the search will stop. To

continue searching, press F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of

the broadcast you want or your VCR/DVD recorder

channel number.

Using MENU Functions

7 Press to jump to “Confirm”, then press .

Your changes have been saved. Repeat the above

procedure to preset other channels manually.

Label Assigns a name of your choice, up to five letters or numbers,

to the selected channel. This name will be displayed briefly

on the screen when the channel is selected.

To input characters, follow steps 1 to 3 of “Edit” (page 44).

AFT Allows you to fine-tune the selected programme number

manually if you feel that a slight tuning adjustment will

improve the picture quality.

You can adjust the fine tuning over a range of –15 to +15.

When “On” is selected, the fine tuning is performed

automatically.

Audio Filter Improves the sound for individual channels in the case of

distortion in mono broadcasts. Sometimes a non-standard

broadcast signal can cause sound distortion or intermittent

sound muting when watching mono programmes.

If you do not experience any sound distortion, we

recommend that you leave this option set to the factory

setting “Off.”

• You cannot receive stereo or dual sound when “Low” or

“High” is selected.

LNA Improves the picture quality for individual channels in the

case of very weak broadcast signals (noisy picture).

If you cannot see any improvement in the picture quality even

if you set to “On”, set this option to “Off” (factory setting).

(Continu ed)

Skip Skips unused analogue channels when you press PROG +/–

to select channels. (You can still select a skipped channel

using the number buttons.)

Decoder Shows and records the scrambled channel selected when

using a decoder connected directly to scart connector /

AV1, or to scart connector / / AV2 via a

VCR/DVD recorder.

• Depending on the country selected for “Country” (page 6),

this option may not be available.

Confirm Saves changes made to the “Manual Programme Preset”

settings.

Digital Set-up

Digital Tuning Digital Auto

Tunes in the available digital channels.

Tuning

This option allows you to retune the TV after moving house,

or to search for new channels that have been launched by

broadcasters. For details, see step 6 of “5: Performing the

initial set-up” (page 6).

Programme

Removes any unwanted digital channels stored on the TV,

Sorting

and changes the order of the digital channels stored on the

TV.

1 Press F/f to select the channel you want to remove or

move to a new position.

You can also select a channel by pressing the number

buttons to enter its three-digit channel number.

2 Remove or change the order of the digital channels as

follows:

To remove the digital channel

Press . After a confirmation message appears, press G

to select “Yes”, then press .

To change the order of the digital channels

Press g, then press F/f to select the new position for the

channel and press G.

3 Press RETURN.

Digital Manual

Tunes the digital channels manually. This feature is available

Tuning

when “Digital Auto Tuning” is set to “Antenna.”

1 Press the number button to select the channel number

you want to manually tune, then press F/f to tune the

channel.

2 When the available channels are found, press F/f to

select the channel you want to store, then press .

3 Press F/f to select the programme number where you

want to store the new channel, then press .

Repeat the above procedure to manually tune other channels.

Subtitle Set-up Subtitle Setting When “For Hard Of Hearing” is selected, some visual aids

may also be displayed with the subtitles (if TV channels

broadcast such information).

Subtitle

Allows you to select the language of the subtitles.

Language

Audio Set-up Audio Type Switches to broadcast for the hearing impaired when “For

Hard Of Hearing” is selected.

Audio Language Selects the language used for a programme. Some digital

channels may broadcast several audio languages for a

programme.

Audio

Provides audio description (narration) of visual information if

Description

TV channels broadcast such information.

Mixing Level* Adjusts the TV main audio and Audio Description output

levels.

Dynamic Range Compensates for differences in the audio level between

different channels. Note that this function may have no effect

for some channels.

Optical Out Selects the audio signal that is output from the DIGITAL

AUDIO OUT (OPTICAL) terminal on the rear of the TV. Set

to “Auto” when equipment compatible with Dolby Digital is

connected, and set to “PCM” when non-compatible

equipment is connected.

* This option is only available when “Audio Description” is set to “On.”

Radio Display Displays the screen wallpaper when you listen to a radio broadcast.

You can select the screen wallpaper colour, display a random colour or view a

slide show (page 27, 34).

To cancel the screen wallpaper display temporarily, press any button.

Parental Lock Sets an age restriction for programmes. Any programme that exceeds the age

restriction can only be watched after a PIN code is entered correctly.

1 Press the number buttons to enter your existing PIN code.

If you have not previously set a PIN, a PIN code entry screen appears. Follow

the instructions of “PIN Code” below.

Using MENU Functions

2 Press F/f to select the age restriction or “None” (for unrestricted watching),

then press .

3 Press RETURN.

PIN Code To set your PIN for the first time

1 Press the number buttons to enter the new PIN code.

2 Press the number buttons to enter the PIN code entered in step 1.

3 Press RETURN.

To change your PIN

1 Press the number buttons to enter your existing PIN code.

2 Press the number buttons to enter the new PIN code.

3 Press the number buttons to enter the new PIN code entered in step 2.

4 Press RETURN.

PIN code 9999 is always accepted.

Technical Set-up Auto Service

Enables the TV to detect and store new digital services as

Update

they become available.

• For the service update to be able to take place the TV set should be left in stand-

by mode from time to time.

System Update Enables the TV to automatically receive software updates

free through your existing aerial/cable (when issued). We

recommend that you leave the setting to “On” at all times.

• For the software upgrade to be able to take place the TV set should be left in

stand-by mode from time to time.

(Continu ed)

System

Displays the current software version and the signal level.

Information

• If signal bar is red (no signal) or amber (low signal), check the aerial/cable

connection.

Time Zone Allows you to manually select the time zone you are in, if it is

not the same as the default time zone setting for your country/

region.

Auto DST Sets whether or not to automatically switch between summer

time and winter time.

On Automatically switches between summer

time and winter time according to the

calendar.

Off The time is displayed according to the

time difference set by “Time Zone.”

Programme

You can switch GUIDE (Sony Guide or GUIDE Plus+). If

Guide

you change Sony Guide to GUIDE Plus+ programme, see

(only when GUIDE

page 18.

Plus+ is available)

Condition that this feature is displayed is following:

– in UK, Italy, France, Germany or Spain.

– you can receive digital broadcasting.

– when “Antenna” is selected in step 7 of “5: Performing

the initial set-up.”

CA Module Set-up Allows you to access a pay TV service once you obtain a Conditional Access

Module (CAM) and a view card. See page 23 for the location of the

(PCMCIA) socket.

Network Settings

Network IP Address

DHCP (DNS

Automatically acquires the network

Settings

automatic)

settings through the Dynamic Host

Configuration Protocol server function of

the router or Internet service provider.

DHCP (DNS

Automatically acquires the network

manual)

settings except for DNS server settings.

You can manually set the DNS settings.

Manual Allows you to set the network settings

according to your network environment.

Test Diagnoses whether the network is correctly connected.

IP Address/

You need to configure each item when “Manual” is selected

Subnet Mask/

in “IP Address Settings.”

Default Gateway/

When “DHCP (DNS manual)” is selected, be sure to enter

Primary DNS/

“Primary DNS” and “Secondary DNS” server addresses

Secondary DNS

manually.

MAC Address Displays the MAC address, which is a fixed, globally unique

identifier of the network device.

Server Display

Displays the connected server list and allows you to select the server you want to

Settings

display on the Home Menu.

Server Diagnostics Diagnoses whether the TV can connect to each server on the home network.

Renderer Function Enables playback of photos or music on the TV through other control devices on

the network, such as a digital still camera or mobile phone.

Renderer Access

Allows you to specify the accessible controller to the TV. When this setting is set

Control

to “On”, you can playback photos or music on the TV using the controller.

Renderer Set-up Automatic

Allows you to select whether to permit access to the TV

Access

automatically when the network device accesses the TV for

Permission

the first time.

Renderer Name Allows you to set the name of the TV to be shown on the

controller.

Using MENU Functions

Additional Information

Installing the Accessories (Wall-Mount Bracket)

To Customers:

For product protection and safety reasons, Sony strongly recommends that installing of your TV be

performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors:

Provide full attention to safety during the installation, periodic maintenance and examination of this

product.

Your TV can be installed using the Wall-Mount Bracket SU-WL500 (sold separately).

• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the

installation.

• Refer to “Detaching the Table-Top Stand from the TV” (page 8).

• Refer to “TV installation dimensions table” (page 53).

• Refer to “Screw and Hook locations diagram/table” (page 53).

• Place the TV on the Table-Top Stand, when securing the Mounting Hook.

Screw

(+PSW6 × 16)

Square

hole

Mounting Hook

Sufficient expertise is required for installing this product, especially to determine the strength of the wall for

withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers

or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any

damage or injury caused by mishandling or improper installation.

TV installation dimensions table

Screen centre point

Unit: mm

Display dimensions

Screen centre

Length for each mounting angle

Model Name

dimension

Angle (0°) Angle (20°)

AB C DEFGH

KDL-52Z4500 1,281 839 38 494 194 428 796 535

KDL-46Z4500 1,140 749 84 492 192 396 710 533

KDL-40Z4500 1,005 666 122 490 187 364 633 529

Figures in the above table may differ slightly depending on the installation.

WARNING

The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of

the TV. Refer to “Specifications” (page 54) for its weight.

Screw and Hook locations diagram/table

Model Name Screw location Hook location

KDL-52Z4500/KDL-46Z4500/KDL-40Z4500 d, g b

Additional Information

* Hook position “a, c” cannot be used for the models in the table above.

Screw location Hook location

Specifications

Model name KDL-52Z4500 KDL-46Z4500 KDL-40Z4500

System

Panel system

LCD (Liquid Crystal Display) Panel

TV system

Analogue: Depending on your country selection: B/G/H, D/K, L, I

Digital: DVB-T/DVB-C

Colour/video system

Analogue: PAL, SECAM, NTSC 3.58/4.43 (only Video In)

Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC HP@L4.0, MP@L3.0

Channel coverage

Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41

D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69

Digital: VHF/UHF

Sound output

9 W + 9 W, 12 W (Woofer)

Input/Output jacks

Aerial

75 ohm external terminal for VHF/UHF

/ AV1

21-pin Scart connector (CENELEC standard) including audio/video input, RGB input and TV

audio/video output.

/ / AV2

21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, S Video

(SMARTLINK)

input, selectable audio/video output, and SMARTLINK interface.

AV3

Video input (phono jack)

AV3

Audio input (phono jacks)

DIGITAL AUDIO OUT (OPTICAL)(digital optical jack)/Audio output (phono jack)

COMPONENT IN

Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

Y: 1 Vp-p, 75 ohms, 0.3V negative sync

B/CB: 0.7 Vp-p, 75 ohms

R/CR: 0.7 Vp-p, 75 ohms

HDMI IN 1, 2, 3

Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

Audio: Two channel linear PCM

32, 44.1 and 48 kHz, 16, 20 and 24 bits

PC Input (see page 55)

Analogue audio (minijack): 500 mVrms (HDMI IN 2 only)

PC IN

PC Input (D-sub 15-pin)

G: 0.7 Vp-p, 75 ohms, non Sync on Green

B: 0.7 Vp-p, 75 ohms, non Sync on Green

R: 0.7 Vp-p, 75 ohms, non Sync on Green

HD: 1-5 Vp-p

VD: 1-5 Vp-p

PC audio input (minijack)

Headphones jack

CAM (Conditional Access Module) slot

USB port

DMPORT

DIGITAL MEDIA PORT

LAN

10BASE-T/100BASE-TX connector (Depending on the operating environment of the network,

connection speed may differ. 10BASE-T/100BASE-TX communication rate and

communication quality is not guaranteed for this TV.)

Power and others

Power requirements

220–240V AC, 50Hz

Screen size (measured diagonally)

52 inches 46 inches 40 inches

Display resolution

1,920 dots (horizontal) × 1,080 lines (vertical)

Power

in “Home”/

210 W 260 W 280 W

consumption

“Standard” mode

in “Shop”/“Vivid”

235 W 284 W 320 W

mode

Standby power consumption*

0.2 W or less (20W when Quick Start is “On”)

Dimensions

with Table-Top

128.1 × 88.2 × 34.6 cm 114.0 × 79.0 × 30.7 cm 100.5 × 70.5 × 27.9 cm

(Approx.)

Stand

(w × h × d)

without Table-Top

128.1 × 83.9 × 13.5 cm 114.0 × 74.9 × 13.2 cm 100.5 × 66.6 × 12.8 cm

Stand

Model name KDL-52Z4500 KDL-46Z4500 KDL-40Z4500

Mass (Approx.) with Table-Top

41.0 kg 34.5 kg 25.5 kg

Stand

without Table-Top

34.0 kg 30.0 kg 22.0 kg

Stand

Supplied accessories

See “Before Use” on page 4.

Optional

Wall-Mount

See “Installing the Accessories (Wall-Mount Bracket)” on page 52.

accessories

Bracket

Colour Variation

CRU-52SG13 CRU-46SG13 CRU-40SG13

Unit

* Specified standby power is reached after the TV finishes necessary internal processes.

PC Input Signal Reference Chart for PC

Resolution

Signals Horizontal

× Vertical (Line) Horizontal

Vertical

Standard

(Pixel)

frequency (kHz)

frequency (Hz)

VGA 640 × 480 31.5 60 VGA

640 × 480 37.5 75 VESA

720 × 400 31.5 70 VGA-T

SVGA 800 × 600 37.9 60 VESA Guidelines

800 × 600 46.9 75 VESA

XGA 1024 × 768 48.4 60 VESA Guidelines

1024 × 768 56.5 70 VESA

1024 × 768 60.0 75 VESA

WXGA 1280 × 768 47.4 60 VESA

1280 × 768 47.8 60 VESA

1280 × 768 60.3 75

1360 × 768 47.7 60 VESA

SXGA 1280 × 1024 64.0 60 VESA

• This TV’s PC input does not support Sync on Green or Composite Sync.

• This TV’s PC input does not support interlaced signals.

Additional Information

• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency.

PC Input Signal Reference Chart for HDMI IN 1, 2, 3

Resolution

Signals Horizontal

× Vertical (Line) Horizontal

Vertical

Standard

(Pixel)

frequency (kHz)

frequency (Hz)

VGA 640 × 480 31.5 60 VGA

SVGA 800 × 600 37.9 60 VESA Guidelines

XGA 1024 × 768 48.4 60 VESA Guidelines

WXGA 1280 × 768 47.4 60 VESA

WXGA 1280 × 768 47.8 60 VESA

SXGA 1280 × 1024 64.0 60 VESA

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When it is flashing

The self-diagnosis function is activated.

1 Count how many 1 (standby) indicator flashes between each two second break.

For example, the indicator flashes three times, then there is a two second break, followed by

another three flashes, etc.

2 Press 1 on the top edge of the TV to turn it off, disconnect the mains lead, and inform your

dealer or Sony service centre of how the indicator flashes (number of flashes).

When it is not flashing

1 Check the items in the tables below.

2 If the problem still persists, have your TV serviced by qualified service personnel.

Condition Explanation/Solution

Picture

No picture (screen is dark) and

• Check the aerial/cable connection.

no sound

• Connect the TV to the mains, and press 1 on the top edge of the TV.

• If the 1 (standby) indicator lights up in red, press TV "/1.

No picture or no menu

• Press / to display the connected equipment list, then select the

information from equipment

desired input.

connected to the scart

• Check the connection between the optional equipment and the TV.

connector

Double images or ghosting

• Check the aerial/cable connection.

(only in analogue mode)

• Check the aerial location and direction.

Only snow and noise appear

• Check if the aerial is broken or bent.

on the screen (only in

• Check if the aerial has reached the end of its serviceable life (three to

analogue mode)

five years in normal use, one to two years at the seaside).

Picture or sound noise when

• Adjust “AFT” (Automatic Fine Tuning) to obtain better picture

viewing a TV channel (only in

reception (page 47).

analogue mode)

Some tiny black points and/or

• The picture of a display unit is composed of pixels. Tiny black points

bright points appear on the

and/or bright points (pixels) on the screen do not indicate a malfunction.

screen

No colour on programmes • Select “Reset” (page 39).

No colour or irregular colour

• Check the connection of the / COMPONENT IN sockets and

when viewing a signal from

check if each sockets are firmly seated in their respective sockets.

the / COMPONENT

IN sockets

Picture freezes or contains

• Check signal level (page 50). If signal bar is red (no signal) or amber

blocks on the screen

(low signal), check the aerial/cable connection.

• Remove the connected USB device. It can be damaged or not supported

by the TV.

Check the website below for updated information about compatible USB

devices:

http://support.sony-europe.com/TV/compatibility/

Sound

No sound, but good picture • Press 2 +/– or % (Mute).

• Check if the “Speaker” is set to “TV Speaker” (page 45).

• When using HDMI input with Super Audio CD or DVD-Audio,

DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.

Condition Explanation/Solution

There is a significant

• Adjust “Volume Offset” setting in the “Sound” menu (page 40).

difference in the output

volume level between

DIGITAL MEDIA PORT

input and TV or other

equipment input.

Connection Diagnostic Results

“Connection successful.”does

Check Connections

not appear.

• Use a straight cable for the LAN cable.

• Check if the cable is connected firmly.

• Check the connection between the TV and the broadband router.

Check Settings

• Change the IP address for the DNS server (see “Checking the Network

Connection” on page 36) while referring to the following.

– Contact your Internet provider.

– Specify the IP address of the router if you do not know the DNS of

your Internet provider.

Home Network

The server cannot be found, a

• Once server settings are changed, turn the TV off and on by pressing 1

list cannot be retrieved, and

on the TV.

playback fails.

• Execute “Server Diagnostics” (page 37).

When using a PC as the server

• Check if the PC is turned on. Do not turn off the PC while accessing.

• If security software is installed on the server, be sure to allow

connections from external devices. For details, see the manual supplied

with your security software.

• The load on the PC may be too high or the server application may

become unstable. Try the following:

– Stop the server application and restart it.

– Restart the PC.

– Reduce the number of applications running on the PC.

– Reduce the amount of content.

Changes on the server are not

• Sometimes changes are not applied to displays on the TV even though

being applied or displayed

content has been added and/or deleted on the server. If this happens, go

content differs from content

back up one level and try opening the folder or server again.

Additional Information

on the server.

Photo and/or music files do

Preliminary Check

not appear or icons are not

• Check that the connected device supports DLNA.

displayed.

• Operations are not guaranteed for all servers. Also, operations differ

depending on the features of the server and the content in question.

• Turn the connected device on.

Check Connections

• Check that the LAN cable and/or mains lead of the server has not

become disconnected.

Check Settings

• Check that the connected device is registered under “Server Display

Settings” (page 36).

• Check that the server is correctly configured.

• Check that the selected equipment is connected to the network and can

be accessed.

• If the “IP Address” in “Network” under “Network Settings” is set to

“DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take some

time to recognise a device if there is no DHCP server. Execute “Server

Diagnostics” (page 37).

(Continu ed)

Condition Explanation/Solution

The TV cannot be found from

Check Connections

renderer-compatible

• Check that the LAN cable and/or mains lead of the server has not

equipment (the controller).

become disconnected.

Check Settings

• Check if the “Renderer Function” is activated (page 50).

• Check that the connected device is registered under “Renderer Access

Control” (page 50).

Channels

The desired channel cannot be

• Switch between digital and analogue mode and select the desired digital/

selected

analogue channel.

Some channels are blank • Scrambled/Subscription only channel. Subscribe to the pay TV service.

• Channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

Digital channels are not

• Contact a local installer to find out if digital transmissions are provided

displayed

in your area.

• Upgrade to a higher gain aerial.

General

Distorted picture and/or sound • Keep the TV away from electrical noise sources such as cars,

motorcycles, hair-dryers or optical equipment.

• When installing optional equipment, leave some space between the

optional equipment and the TV.

• Check the aerial/cable connection.

• Keep the aerial/cable TV cable away from other connecting cables.

The TV turns off

• Check if the “Sleep Timer” is activated, or confirm the “Duration”

automatically (the TV enters

setting of “On Timer Settings” (page 43).

standby mode)

• If no signal is received and no operation is performed in the TV mode

for 10 minutes, the TV automatically switches to standby mode.

The TV turns on automatically • Check if the “On Timer” is activated (page 43).

Some input sources cannot be

• Select “AV Preset” and cancel “Skip” of the input source (page 44).

selected

The remote does not function • Replace the batteries.

The BD, DVD, AMP and TV

• The batteries inside the remote run out of battery life. Replace the

function buttons on the remote

batteries with new ones.

flash at the same time.

A channel cannot be added to

• Up to 999 channels can be stored in the favourite list.

the favourite list

You have a blank TV listings

• Check the aerial/cable connection.

in the GUIDE Plus+ system

• Your cabling and Setup is OK, but your GUIDE Plus+ system was not

connected for enough time to receive TV listings data. Leave the TV

“STANDBY” overnight (24 hours) or use “Manual Data Download”

(page 20).

• You live in a country/region where the GUIDE Plus+ system is not yet

available. Check the list of countries to see if you are in a region that is

supported.

(http://www.europe.guideplus.com/)

HDMI equipment does not

• Check that your equipment is “Control for HDMI” compatible

appear on “HDMI Device

equipment.

List”

Not all channels are tuned • Check support web site for cable provide information.

http://support.sony-europe.com/TV/DVBC/

You cannot select “Off” in

• If any “Control for HDMI” compatible audio equipment is connected to

“Control for HDMI.”

the TV, you cannot select “Off” in this menu. If you want to change the

audio output to the TV speaker, select “TV Speaker” in the “Speaker”

menu (page 45).

Condition Explanation/Solution

The speaker grille has come

• To attach the speaker grille, first turn off the TV, then unplug the mains

off

lead. Then follow the procedure below.

Orient the speaker grille so that the location of the marks on the speaker

grille and TV match, insert the protrusions on the speaker grille into the

holes on the TV, and support gently. Check that the speaker grille and

TV are in contact without any gaps, and then secure it by pushing and

sliding the speaker grille left into place.

To prevent the TV set from being damaged, do not touch the speakers or

their surroundings.

Do not touch the

speakers.

Additional Information

Wprowadzenie

s „BRAVIA” i są znakami towarowymi Sony

Corporation.

Dziękujemy, że wybrali Państwo produkt firmy Sony.

s „XMB” i „xross media bar” są znakami towarowymi firm

Przed przystąpieniem do eksploatacji telewizora należy

Sony Corporation i Sony Computer Entertainment Inc.

dokładnie zapoznać się z treścią niniejszej instrukcji oraz

zachować ją do wykorzystania w przyszłości.

Urządzenie zostało wyprodukowane przez Sony

Corporation, 1-7-1 Konan Minato-ku Tokio, 108-0075

Japonia. Autoryzowanym przedstawicielem ds.

kompatybilności elektromagnetycznej i bezpieczeństwa

produktu jest Sony Deutschland GmbH, Hedelfinger

Strasse 61, 70327 Stuttgart, Niemcy. W sprawach

dotyczących serwisu lub gwarancji należy kontaktować

się z punktem podanym w osobnym dokumencie

serwisowym lub gwarancyjnym.

Informacja dotycząca funkcji Telewizji

Cyfrowej

s Wszystkie funkcje dotyczące Telewizji Cyfrowej ( )

dostępne są tylko w krajach lub na obszarach, gdzie

nadawane są sygnały cyfrowej telewizji naziemnej DVB-T

(MPEG2 i MPEG4 AVC) lub w miejscach, w których

istnieje dostęp do kompatybilnych z urządzeniem

sygnałów kablowych DVB-C (MPEG2 i MPEG4 AVC).

Prosimy skontaktować się z lokalnym sprzedawcą, aby

ustalić, czy w miejscu Państwa zamieszkania można

odbierać sygnały DVB-T lub zwrócić się do dostawcy usług

kablowych o informacje, czy oferowane przez niego usługi

DVB-C będą dostępne w zakupionym odbiorniku TV.

s Dostawca usług kablowych może doliczyć dodatkową

opłatę za takie usługi oraz poprosić użytkownika o

podpisanie stosownej umowy.

s Choć zakupiony model telewizora jest dostosowany do

odbioru sygnałów telewizji naziemnej DVB-T oraz

kablowej DVB-C, nie można zagwarantować jego

kompatybilności z tworzonymi w przyszłości programami

w formacie DVB-T lub DVB-C.

s W niektórych krajach lub regionach pewne funkcje

Telewizji Cyfrowej lub kablowej DVB-C mogą być

niedostępne.

s Szczegółowe informacje na temat funkcji DVB-C znajdują

się na naszej stronie dotyczącej sygnałów przesyłanych

drogą kablową:

http://support.sony-europe.com/TV/DVBC/

Informacje dot. znaków towarowych

s jest zastrzeżonym znakiem towarowym projektu

DVB

s DLNA i DLNA CERTIFIED są znakami towarowymi

i/lub znakami usługowymi firmy Digital Living Network

Alliance.

s GUIDE Plus+ jest (1) zastrzeżonym znakiem handlowym

lub znakiem handlowym, (2) jest produkowany na licencji

i (3) jest chroniony różnorodnymi patentami

międzynarodowymi i wnioskami patentowymi, których

właścicielem jest lub na które licencję posiada firma

Gemstar-TV Guide International, Inc. lub powiązane z nią

firmy.

s FIRMA GEMSTAR-TV GUIDE INTERNATIONAL,

INC. I POWIĄZANE Z NIĄ FIRMY NIE PONOSZĄ

ŻADNEJ ODPOWIEDZIALNOŚCI ZA

DOKŁADNOŚĆ INFORMACJI O

HARMONOGRAMIE PROGRAMÓW

DOSTARCZANYCH PRZEZ SYSTEM GUIDE

PLUS+. FIRMA GEMSTAR-TV GUIDE

INTERNATIONAL, INC. I POWIĄZANE Z NIĄ

FIRMY NIE PONOSZĄ W ŻADNYM WYPADKU

ODPOWIEDZIALNOŚCI W JAKIEJKOLWIEK

KWOCIE ZA UTRATĘ ZYSKÓW, UTRATĘ

MOŻLIWOŚCI HANDLOWYCH ANI ZA

POŚREDNIE, SPECYFICZNE BĄDŹ WYNIKOWE

STARTY ZWIĄZANE Z DOSTARCZANIEM LUB

WYKORZYSTANIEM JAKICHKOLWIEK

INFORMACJI, USŁUG BĄDŹ SPRZĘTU

ZWIĄZANEGO Z SYSTEMEM GUIDE PLUS+.

s Wyprodukowano na licencji Dolby Laboratories. Nazwa

Dolby i symbol podwójnej litery D są znakami

towarowymi firmy Dolby Laboratories.

s Nazwa HDMI, logo HDMI oraz High-Definition

Multimedia Interface są znakami towarowymi lub

zastrzeżonymi znakami towarowymi firmy HDMI

Licensing LLC.

Spis treści

Instrukcja podłączenia i programowania 4

Informacje dotyczące bezpieczeństwa........................................................................................ 10

Środki ostrożności ......................................................................................................................... 12

Pilot oraz elementy sterujące i wskaźniki telewizora ................................................................. 13

Odbiór audycji telewizyjnych

Odbiór audycji telewizyjnych ........................................................................................................ 17

Korzystanie z systemu GUIDE Plus+™ oraz cyfrowego przewodnika po programach EPG

(Digital Electronic Programme Guide) .......................................................................... 20

Korzystanie z listy ulubionych kanałów cyfrowych .......................................................... 24

Korzystanie z dodatkowego sprzętu

Schemat połączeń.......................................................................................................................... 25

Oglądanie obrazów z podłączonych urządzeń............................................................................ 28

Odtwarzanie zdjęć/muzyki poprzez USB..................................................................................... 30

Korzystanie z BRAVIA Sync ze Sterowaniem przez HDMI......................................................... 33

Obsługa dodatkowego sprzętu za pomocą pilota odbiornika TV.............................................. 34

Korzystanie z funkcji sieciowych

Podłączanie odbiornika TV do sieci ............................................................................................. 37

Korzystanie z plików graficznych/muzycznych poprzez sieć.................................................... 37

Sprawdzanie połączenia sieciowego ........................................................................................... 39

Konfigurowanie ustawień wyświetlania serwerów..................................................................... 40

Korzystanie z funkcji Menu

Nawigowanie w menu Dom odbiornika TV (XMB™)................................................................... 41

Ustawienia....................................................................................................................................... 42

Informacje dodatkowe

Instalowanie elementów dodatkowych (uchwyt ścienny).......................................................... 57

Dane techniczne............................................................................................................................. 59

Rozwiązywanie problemów........................................................................................................... 61

: tylko w przypadku kanałów cyfrowych

Przed rozpoczęciem eksploatacji telewizora należy zapoznać się z treścią rozdziału „Informacje dotyczące

bezpieczeństwa” niniejszej instrukcji.

Zachować instrukcję do wykorzystania w przyszłości.

Instrukcja podłączenia i programowania

Przed rozpoczęciem

1: Mocowanie stojaka

użytkowania

(dla KDL-46Z4500/

KDL-40Z4500)

Sprawdzić akcesoria

1 Otworzyć pudło kartonowe i wyjąć

Przewód zasilający (1)

stojak oraz śruby.

2 Umieścić odbiornik TV na stojaku.

Pilot zdalnego sterowania RM-ED012 (1)

Należy uważać, aby nie uszkodzić

Baterie AA (typu R6) (2)

kabli.

Stojak (1) oraz śruby mocujące stojaka (4)

(tylko KDL-46Z4500/KDL-40Z4500)

Włożyć baterie do pilota

Aby otworzyć, nacisnąć i podnieść pokrywę.

3 Zamocować odbiornik TV do stojaka

zgodnie z oznaczeniem strzałkami

• Przy wkładaniu baterii do pilota zachować

właściwą biegunowość.

przeprowadzając dostarczane śruby

•Nie należy używać różnych typów baterii

przez otwory montażowe.

jednocześnie ani łączyć starych baterii z

nowymi.

•Zużyte baterie należy utylizować w sposób

nieszkodliwy dla środowiska naturalnego. W

niektórych regionach sposób utylizacji

zużytych baterii mogą regulować stosowne

przepisy. Należy skontaktować się w tej

sprawie z lokalnymi władzami.

• Należy ostrożnie obchodzić się z pilotem. Nie

należy nim rzucać, chodzić po nim, ani

wylewać na niego żadnych płynów.

•Nie należy kłaść pilota w pobliżu źródeł ciepła

lub w miejscach narażonych na bezpośrednie

•Jeśli pracuje się ze śrubokrętem elektrycznym,

działanie promieni słonecznych.

należy ustawić moment obrotowy na ok.

1,5 N·m {15 kgf·cm}.

Wymiana osłony głośnika

Osłonę głośnika można wymienić na inną,

kupioną oddzielnie. Nie należy jej jednak

zdejmować, chyba że w celu wymiany.

Szczegółowe informacje na ten temat

znajdują się w instrukcjach osłon.

2: Podłączanie anteny/

3: Zabezpieczenie

urządzenia STB/nagrywarki

telewizora przed

(np. nagrywarki DVD)

przewróceniem

Instrukcja podłączenia i programowania

Podłączanie urządzenia STB/nagrywarki

(np. nagrywarki DVD) ze złączem SCART

A V

( SMARTLINK )

Przewód Scart

Urządzenie STB dla TV kablowej/nagrywarki

(np. nagrywarki DVD)

1 Wkręć wkręt do drewna (średnica

Podłączanie urządzenia STB/nagrywarki

4 mm, nie należy do wyposażenia) w

(np. nagrywarki DVD) ze złączem HDMI

podstawkę pod telewizor.

2 Wkręć śrubę (M6 × 12-15, nie należy

do wyposażenia) w otwór montażowy

w telewizorze.

3 Połącz wkręt do drewna i śrubę przy

pomocy mocnej linki.

Przewód HDMI

Urządzenie STB dla TV kablowej/nagrywarki

(np. nagrywarki DVD)

2 Nacisnąć 1 na odbiorniku TV.

4: Formowanie wiązki

Przy pierwszym włączeniu telewizora

przewodów

na ekranie pojawia się menu Język.

3 Za pomocą przycisków F/f/G/g

3 4

wybrać język wyświetlany na ekranach

menu, a następnie nacisnąć .

Language

English

Česky

Nederlands

Magyar

Français

Русский

Italiano

ББлгар

ски

Deutsch

Suomi

Dansk

Türkçe

Svenska

Español

Norsk

Català

Slovenčina

Português

Română

Polski

•Nie należy prowadzić przewodu zasilającego w

jednej wiązce z innymi przewodami.

4 W celu dokonania wyboru kraju w

którym używany będzie odbiornik TV,

5: Wykonywanie

nacisnąć F/f, a następnie .

początkowej konfiguracji

Kraj

ustawień

Wybierz kraj.

United Kingdom

Ireland

Nederland

België/Belgique

Luxembourg

France

Italia

Jeśli kraju, w którym odbiornik będzie

używany, nie ma na liście, zamiast

nazwy kraju należy wybrać „-”.

5 W celu dokonania wyboru rodzaju

lokalizacji, w którym używany będzie

odbiornik TV, nacisnąć F/f, a

następnie .

• Wybrać „Dom”, aby uzyskać najlepsze

ustawienia do użytkowania odbiornika TV w

domu.

Lokalizacja

Wybierz lokalizację.

Dom

Sklep

3-11

1 Podłączyć odbiornik TV do gniazdka

sieciowego (220-240V AC, 50Hz).

6 Wybrać „Tak” i nacisnąć .

Szybki start

Autoprogramowanie

Czy chcesz włączyć opcję Szybki start?

Zapewnia ona szybsze włączanie TV,

Instrukcja podłączenia i programowania

Czy chcesz uruchomić Autoprogramowanie?

ale powoduje większe zużycie prądu w trybie gotowości.

Tak Nie

Szczegółowe informacje, patrz strona

7 Nacisnąć F/f, aby wybrać „Naziemna”

44.

lub „Kablowa”, a następnie nacisnąć

Sterowanie przez HDMI

Po wybraniu „Kablowa”, pojawi się

ekran wyboru rodzaju przeszukiwania.

Czy chcesz włączyć sterowanie urządzeń zgodnych

Patrz „Aby dostroić odbiornik TV do

z systemem sterowania przez HDMI?

Wybór "Tak" spowoduje zwiekszone

odbioru telewizji kablowej” (strona 8).

zużycie energii w trybie gotowosci.

Odbiornik TV rozpoczyna

Tak Nie

wyszukiwanie wszystkich dostępnych

kanałów cyfrowych, a następnie

analogowych. Procedura ta zajmuje

nieco czasu, należy więc cierpliwie

Szczegółowe informacje, patrz strona

czekać i nie naciskać jakichkolwiek

33.

przycisków odbiornika TV lub pilota.

Po wykonaniu tego kroku, ekran

Jeśli zostanie wyświetlony komunikat

ustawień GUIDE Plus+ jest

żądający potwierdzenia podłączenia

wyświetlany tylko wtedy, gdy GUIDE

anteny

Plus+ jest dostępny.

Nie znaleziono żadnych kanałów

11 Nacisnąć .

cyfrowych lub analogowych. Sprawdzić

wszystkie połączenia antenowe/

Odbiornik TV jest teraz dostrojony do

telewizji kablowej, a następnie

wszystkich dostępnych kanałów.

nacisnąć , aby ponownie rozpocząć

autoprogramowanie.

•Gdy nie można odbierać sygnału kanałów

8 Gdy na ekranie zostanie wyświetlone

cyfrowych lub gdy w kroku 4 wybrano kraj, w

którym brak kanałów cyfrowych, to po

menu „Sortowanie programów”,

wykonaniu kroku 8 należy ustawić czas.

należy postępować zgodnie z

czynnościami opisanymi w rozdziale

„Sortowanie programów” (strona 51).

Jeśli kolejność zachowanych w

telewizorze kanałów analogowych ma

pozostać niezmieniona, nacisnąć

przycisk RETURN, aby przejść do

punktu 9.

(Cd)

Aby dostroić odbiornik TV do odbioru

Aby ustawić system GUIDE Plus+ (tylko

telewizji kablowej

wtedy, gdy system GUIDE Plus+ jest

1 Nacisnąć .

dostępny)*

* Warunkiem ustawienia tej funkcji jest:

2 Nacisnąć F/f, aby wybrać

– przebywanie w Wielkiej Brytanii, Włoszech,

„Przeszukiwanie szybkie” lub

Niemczech lub Hiszpanii.

„Przeszukiwanie pełne”, a następnie

– możliwość odbierania sygnału kanałów

nacisnąć .

cyfrowych.

– jeśli w kroku 7 w punkcie „5: Wykonywanie

„Przeszukiwanie szybkie” : kanały są

początkowej konfiguracji ustawień”

programowane zgodnie z informacją

wybrano opcję „Naziemna”.

operatora telewizji kablowej zawartą w

1 Wprowadź kod pocztowy regionu w

nadawanym sygnale.

Zalecanym ustawieniem

którym mieszkasz, używając w tym

„Częstotliwość”, „Identyfikator sieci”

celu klawiszy F/f/G/g/+.

oraz „Szybkość transmisji symb.” jest

„Automat.”.

•Wprowadź od lewej, jeśli liczba cyfr w

Opcja ta jest polecana przy usłudze

kodzie pocztowym jest mniejsza niż

szybkiego strojenia, jeśli jest ona

siedem.

oferowana przez operatora telewizji

2 Wybierz język dla GUIDE Plus+.

kablowej.

Ten punkt zostanie pominięty, jeśli w

Jeżeli „Przeszukiwanie szybkie” nie

kroku 3 w punkcie „5: Wykonywanie

zdoła zaprogramować kanałów, należy

początkowej konfiguracji ustawień”

skorzystać z metody „Przeszukiwanie

wybrano: „English”, „Deutsch”,

pełne” opisanej poniżej.

„Español”, „Italiano”, „Français” lub

„Przeszukiwanie pełne”: Wszystkie

„Nederlands”.

dostępne kanały zostaną

zaprogramowane i zapamiętane.

3 Pobieranie danych GUIDE Plus+.

Procedura ta zajmuje nieco czasu.

Początkowe pobieranie zajmuje nieco

Opcja ta jest polecana wtedy, gdy

czasu, należy więc cierpliwie czekać i

operator telewizji kablowej nie oferuje

nie naciskać jakichkolwiek przycisków

usługi „Przeszukiwanie szybkie”.

odbiornika TV lub pilota. Po pobraniu

Aby uzyskać dalsze informacje o

pierwszej partii danych listy

polecanych operatorach telewizji

programów TV, kolejne pobieranie

kablowej, patrz strona internetowa:

będą dokonywane automatycznie.

http://support.sony-europe.com/TV/

DVBC/

3 Nacisnąć f, aby wybrać „Rozpocznij”,

a następnie nacisnąć .

Odbiornik TV rozpoczyna

wyszukiwanie kanałów. Nie naciskać

żadnych przycisków na odbiorniku TV

ani na pilocie.

•Niektórzy operatorzy telewizji kablowej nie

świadczą usługi „Przeszukiwanie szybkie”.

Jeśli „Przeszukiwanie szybkie” nie wykryje

żadnych kanałów, przeprowadzić

„Przeszukiwanie pełne”.

Regulowanie kąta

oglądania TV

Ten odbiornik TV można regulować w

Instrukcja podłączenia i programowania

zakresie kątów przedstawionym poniżej.

Regulowanie kąta lewego i prawego

(obracanie)

Widok górny

20°

Przód

•Podczas regulowania kąta, przytrzymywać

stojak odbiornika jedną ręką, aby uniknąć

ześlizgiwania się lub przechylania odbiornika

TV.

Odkręcanie stojaka od

odbiornika TV

•Odkręcić śruby wskazywane strzałkami od

odbiornika TV.

•Stojak można odkręcić od odbiornika TV

jedynie w poniższych wypadkach.

– Jeśli odbiornik TV ma być zamontowany na

ścianie.

– Jeśli po zakupie odbiornik TV ma być

włożony do kartonu (tylko KDL-46Z4500/

KDL-40Z4500).

Топ 10 инструкций

100.00

Gefest 6100-03

99.98

Alcatel 9008D A3 XL 16Gb White Blue

99.85

Gefest 6100-04 0001

99.85

Alcatel Pixi 4

99.75

Casio EX-H20G Silver

99.72

Tp-Link TL-WA5210G

99.72

Gefest 3102

99.67

Casio CTK-4000

99.64

Gefest 6100-02

99.63

Casio EX-Z1050 Silver

К рейтингу инструкций и мануалов →

Другие инструкции

Bosch HLN 424020

Samsung WF-R1056

Sony KDL-40 W3000

Sony KDL-40 W5710 Black

Sony KDL-40BX420

Sony KDL-40BX440

Sony KDL-40 Z4500: Precautions

Precautions: Sony KDL-40 Z4500

Precautions

Watching TV

Using Optional Equipment

Using Network Features

Using MENU Functions

Additional Information

Spis treści

Instrukcja podłączenia i programowania

Оглавление

Топ 10 инструкций

Другие инструкции