Sony DSC-WX100 Silver: Charging the battery pack

Charging the battery pack: Sony DSC-WX100 Silver

Charging the battery pack

For customers in the USA

and Canada

GB

Power/Charge lamp

Power cord

Lit: Charging

(Mains lead)

Off: Charging finished

Flashing:

For customers in countries/regions

Charging error

other than the USA and Canada

Charging paused due to

overheating

Connect the camera to the AC Adaptor (supplied),

1

using the micro USB cable (supplied).

Connect the AC Adaptor to the wall outlet (wall socket).

2

The Power/Charge lamp lights orange, and charging starts.

Turn off the camera while charging the battery.

You can charge the battery pack even when it is partially charged.

When the Power/Charge lamp flashes and charging is not finished,

remove and re-insert the battery pack.

GB

11

Notes

If the Power/Charge lamp on the camera flashes when the AC Adaptor is

connected to the wall outlet (wall socket), this indicates that charging is

temporarily stopped because the temperature is outside the recommended range.

When the temperature gets back within the appropriate range, the charging

resumes. We recommend charging the battery pack in an ambient temperature of

between 10°C to 30°C (50ºF to 86ºF).

The battery pack may not be effectively charged if the terminal section of the

battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton

swab to clean the terminal section of the battery.

Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall

outlet (wall socket) immediately to disconnect from the power source.

When charging is finished, disconnect the AC Adaptor from the wall outlet (wall

socket).

Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied)

and AC Adaptor (supplied).

BC-TRN2 battery charger (sold separately) is able to quick-charge the NP-BN

rechargeable battery pack supplied with this model. BC-TRN battery charger (sold

separately) is not able to quick-charge the NP-BN rechargeable battery pack

supplied with this model.

x

Charging time (Full charge)

The charging time is approximately 115 min. using the AC Adaptor

(supplied).

Note

The above charging time applies when charging a fully depleted battery pack at a

temperature of 25°C (77°F). Charging may take longer depending on conditions of

use and circumstances.

GB

12

x

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using

a micro USB cable.

GB

Note

Note the following points when charging via a computer:

If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period

of time.

Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer

and the camera. The camera may cause a malfunction. Before turning on/off, or

restarting the computer or waking the computer from sleep mode, disconnect the

camera and the computer.

No guarantees are made for charging using a custom-built computer or a

modified computer.

x

Battery life and number of images that can be

recorded and played back

Battery life Number of images

Shooting (still

DSC-WX100 Approx. 120 min. Approx. 240 images

images)

DSC-WX150 Approx. 120 min. Approx. 240 images

Viewing (still

DSC-WX100 Approx. 180 min. Approx. 3600 images

images)

DSC-WX150 Approx. 180 min. Approx. 3600 images

Shooting

DSC-WX100 Approx. 60 min.

(movies)

DSC-WX150 Approx. 60 min.

GB

13

Notes

The above number of images applies when the battery pack is fully charged. The

number of images may decrease depending on the conditions of use.

The number of images that can be recorded is for shooting under the following

conditions:

Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately)

The battery pack is used at an ambient temperature of 25°C (77°F).

[Disp. Resolution]: [Standard]

The number for “Shooting (still images)” is based on the CIPA standard, and is for

shooting under the following conditions:

(CIPA: Camera & Imaging Products Association)

DISP (Display Setting) is set to [ON].

Shooting once every 30 seconds.

The zoom is switched alternately between the W and T ends.

The flash strobes once every two times.

The power turns on and off once every ten times.

The battery life for movies applies shooting under the following conditions:

Movie quality: AVC HD HQ

When continuous shooting ends because of set limits (page 25), press the

MOVIE (Movie) button again and continue shooting. Shooting functions such as

the zoom do not operate.

x

Supplying power

The camera can be supplied with power from the wall outlet (wall socket) by

connecting to the AC Adaptor, using the micro USB cable (supplied).

You can import images to a computer without worrying about draining the

battery pack by connecting the camera to a computer using the micro USB

cable.

In addition, you can use the AC Adaptor AC-UD10 (sold separately) for

shooting to supply power when shooting.

Notes

Power cannot be supplied when the battery pack is not inserted in the camera.

When the camera is connected directly to a computer or to a power outlet using the

supplied AC Adaptor, power supply is available only in playback mode. If the

camera is in shooting mode or while you are changing the settings of the camera,

power is not supplied even if you make a USB connection using the micro USB

cable.

If you connect the camera and a computer using the micro USB cable while the

camera is in playback mode, the display on the camera will change from the

playback screen to the USB connection screen. Press (Playback) button to

GB

switch to the playback screen.

14

Оглавление