Sony CDX-L450: Other Functions
Other Functions: Sony CDX-L450
Quickly attenuating the
Other Functions
sound
Press (ATT).
“ATT” appears in the display.
Adjusting the sound
To restore the previous volume level, press
characteristics
(ATT) again.
You can adjust the bass, treble, balance, and
fader.
Canceling the beep sound
1 Select the item you want to adjust by
pressing (SEL) repeatedly.
Each time you press (SEL), the item
Press (6) while pressing (SEL) down.
changes as follows:
To activate the beep sound again, press these
BAS (bass) t TRE (treble) t
buttons again.
BAL (left-right) t FAD (front-rear)
Note
2 Adjust the selected item by pressing
If you connect an optional power amplifier and do
either side of the volume +/– button.
not use the built-in amplifier, the beep sound will
be deactivated.
Note
Adjust within 3 seconds after selecting the item.
13
Selecting the sound
Boosting the bass sound
— D-bass
position
— My Best sound Position (MBP)
You can enjoy a clear and powerful bass
sound. The D-bass function boosts the low
When you drive without passengers, you can
frequency signal and high frequency signal
enjoy the most comfortable sound
with a sharper curve than conventional bass
environment with “My Best sound Position.”
boost.
“My Best sound Position” has two presets,
You can hear the bass line more clearly even
which adjust the sound level of balance and
while the vocal volume remains the same. You
fader. You can select one very easily with the
can emphasize and adjust the bass sound
MBP button.
easily with the (D) D-BASS button.
Balance Level Fader Level
Display
window
Right
Left
Front
Rear
D.BASS-3
D.BASS-2
Level
D.BASS-1
D.BASS-3
MBP-A
– 4dB
0
0
– 4dB
D.BASS-2
D.BASS-1
MBP-B
0
– 4dB
0
– 4dB
0dB
MBP-OFF
0
0
0
0
Frequency (Hz)
Adjusting the bass curve
Press (MBP) repeatedly for the desired
listening position.
Press (D) (D-BASS) repeatedly to select
The mode of “My Best sound Position” is
the desired bass curve.
shown in the display in order of the table.
As the D-BASS number increases so does
the effect.
Note
The bass sound may distort at same volume. If the
bass sound distorts, select less effective bass curve.
If you want to adjust the sound level of
balance and fader more precisely, you can
do it using the (SEL) button. (page 13)
Notes
• When the BAL (balance) or FAD (fader) in
"Adjusting the sound characteristics" (page 13) is
adjusted, the MBP setting returns OFF.
• When MBP is set to OFF, the BAL and FAD setting
is activated.
14
