Sony BRAVIA KDL-20S2000 – страница 2
Инструкция к Sony BRAVIA KDL-20S2000
Оглавление
21
GB
KDL-20S2020
2-685-333-41(0)
Using MENU Functions
Sound Adjustment menu
You can select the options listed below on the
Sound menu. To select options in “Settings”,
see “Navigating through menus” (page 19).
Sound Effect
Selects the sound mode.
•
“
Standard”: Enhances clarity, detail, and sound presence by using “BBE High definition
Sound System.”
• “Dynamic”: Intensifies clarity and sound presence for better intelligibility and musical
realism by using the “BBE High definition Sound System.”
• “BBE ViVA”: BBE ViVA Sound provides musically accurate natural 3D image with Hi-Fi
sound. The clarity of the sound is improved by BBE while the width depth and height of
sound image are expanded by BBE’s proprietary 3D sound process. BBE ViVA Sound is
compatible with all TV programs including news, music, dramas, movies, sports and
electronic games.
• “Dolby Virtual
”
: Uses the TV speakers to simulate the surround effect produced by a multi
channel system.
• “Off”: Flat response.
Tips
• You can change sound effect by pressing
9
repeatedly.
• If you set “Auto Volume” to “On”, “Dolby Virtual” changes to “Natural”.
Treble
Adjusts higher-pitched sounds.
Bass
Adjusts lower-pitched sounds.
Balance
Emphasizes left or right speaker balance.
Reset
Resets all the sound settings to the factory settings.
Dual Sound
Selects the sound from the speaker for a stereo or bilingual broadcast.
• “Stereo”, “Mono”: For a stereo broadcast.
• “A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B”
for sound channel 2, or “Mono” for a mono channel, if available.
Tip
If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”.
Auto Volume
Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend
to be louder than programmes).
Sound Adjustment
Select:
Enter:
Exit:
MENU
Sound Effect
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
TV Speakers
Standard
50
50
0
Mono
On
On
Back:
010COV.book Page 21 Monday, June 12, 2006 3:29 PM
22
GB
KDL-20S2020
2-685-333-41(0)
TV Speakers
Turns off the TV speakers e.g. to listen to the sound through external audio
equipment connected to the TV.
• “On”: the sound is output from the TV speakers.
• “One Time Off”: the TV speakers are temporarily turned off allowing you to listen
to the sound from external audio equipment.
• “Permanently Off”: the TV speakers are permanently turned off allowing you to
listen to the sound from external audio equipment.
Tips
• To turn on the TV speakers again, change to on.
• The “One Time Off” option automatically returns to “On” when the TV set is
switched off.
• “Sound Adjustment” options are not available if “One Time Off” or “Permanent
Off” have been selected.
010COV.book Page 22 Monday, June 12, 2006 3:29 PM
23
GB
KDL-20S2020
2-685-333-41(0)
Using MENU Functions
Features menu
You can select the options listed below on the
Features menu. To select options in “Settings”,
see “Navigating through menus” (page 19).
Screen
Changes the screen format.
• “Auto Format”: Automatically changes the screen format according to the
broadcast signal.
• “Screen Format”: For details about the screen format, see page 14
• “Vertical Size”: Adjusts the vertical size of the picture when the screen format is
set to Smart.
Tips
• Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the
format of the screen by pressing
repeatedly.
• “Auto Format” is available for PAL and SECAM signals only.
Power Saving
Selects the power saving mode to reduce the power consumption of the TV.
• “Standard”: Default settings.
• “Reduce”: Reduces the power consumption of the TV.
• “Picture Off”: Switches off the picture. You can listen to the sound with the picture
off.
AV2 Output
Sets a signal to be output through the socket labelled
/
2 on the rear of the
TV. If you connect a VCR to the
/
2 socket, you can then record from the
equipment connected to other sockets of the TV.
• “TV”: Outputs a broadcast.
• “Auto”: Outputs whatever is being viewed on the screen. Not available for
AV3,
AV5 and
AV6.
RGB Center
Adjusts the horizontal picture position so that the picture is in the middle of the
screen.
Tip
This option is only available if an RGB source has been connected to the Scarts connectors
1/
1
or
2/
2
on the rear of the TV.
Features
Select:
Enter:
Exit:
MENU
Screen
Power Saving
AV2 Output
RGB Center
PC Adjustment
Timer
Standard
TV
0
Back:
010COV.book Page 23 Monday, June 12, 2006 3:29 PM
24
GB
KDL-20S2020
2-685-333-41(0)
PC Adjustment
Customizes the TV screen as a PC monitor.
Tip
This option is only available if you are in PC Mode.
• “Phase”: Adjust the screen when a part of a displayed text or image is not clear.
• “Pitch”: Enlarges or shrinkes the screen size horizontally.
• “H Center”: Moves the screen to the left or to the right.
• “V Lines”: Corrects the picture lines while viewing an RGB input signal from the
PC
connector.
• “Power saving”: Turns to standby mode if no PC signal is received.
• “Reset”: Resets to the factory settings.
Timer
Sets the timer to turn on/off the TV.
• Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the Sleep Timer is activated, the
(Timer) indicator on the TV (front)
lights up in orange.
Tips
• If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
• “TV will soon turn off by sleep timer.” appears on the screen one minute before the TV
switches to standby mode.
• Clock Set
Allows you to adjust the clock manually. When the TV is receiving digital
channels, the clock cannot be adjusted manually since it is set to the time code of
the broadcasted signal.
• Timer
Sets the timer to turn on/off the TV.
“Timer Mode”: Selects the desired period.
“On Time”: Sets the time to turn on the TV.
“Off Time”: Sets the time to turn off the TV.
010COV.book Page 24 Monday, June 12, 2006 3:29 PM
25
GB
KDL-20S2020
2-685-333-41(0)
Using MENU Functions
Set-up menu
You can select the options listed below on the
Set-up menu. To select options in “Settings”, see
“Navigating through menus” (page 19).
Auto Start-up
Starts the “first time operation menu” to select the language and country/region, and
tune in all available digital and analogue channels. Usually, you do not need to do
this operation because the language and country/region will have been selected and
channels already tuned when the TV was first installed (page 5, 6). However, this
option allows you to repeat the process (e.g., to retune the TV after moving house,
or to search for new channels that have been launched by broadcasters).
Language
Selects the language in which the menus are displayed.
Country
Selects the country/region where you operate the TV.
Tip
The country/region in which you want to use the TV does not appear in the list, select
“-” instead of a country/region.
Auto Tuning
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 5, 6). However, this option allows you to
repeat the process (e.g., to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters).
Programme Sorting
Changes the order in which the analogue channels are stored on the TV.
1
Press
F
/
f
to select the channel you want to move to a new position,
then press
g
.
2
Press
F
/
f
to select the new position for your channel, then press
.
AV Preset
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
an input source that is not connected to any equipment.
1
Press
F
/
f
to select the desired input source, then press
.
2
Press
F
/
f
to select the desired option below, then press
.
• AV1 (or AV2/ AV3/ AV4/ PC/ HDMI), VIDEO, DVD, CABLE, GAME, CAM, SAT:
Uses one of the preset labels to assign a name to connected equipment.
• “Edit”: Creates your own label.
• “Skip”: Skips an input source that is not connected to any equipment when you
press
F
/
f
to select the input source.
Sound Offset
Sets an independent volume level to each equipment connected to the TV.
Set Up
Select:
Enter:
Exit:
MENU
Auto Start Up
Language
Country
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme Preset
Digital Set Up
English
-
Back:
Continued
010COV.book Page 25 Monday, June 12, 2006 3:29 PM
26
GB
KDL-20S2020
2-685-333-41(0)
Manual Programme
Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press
F
/
f
to
select the programme number you want to modify. Then, press
.
System
/
Channel
Presets programme channels manually.
1
Press
F
/
f
to select “System”, then press
.
2
Press
F
/
f
to select one of the following TV broadcast systems, then
press
G
.
B/G: For western European countries/regions
D/K: For eastern European countries/regions
L: For France
I: For the United Kingdom
Note
Depending on the country/region selected for “
Country” (page 5), this option may not be
available.
3
Press
F
/
f
to select “Channel”, then press
.
4
Press
F
/
f
to select “S” (for cable channels) or “C” (for terrestrial
channels), then press
g
.
5
Tune the channels as follows:
If you do not know the channel number (frequency)
Press
F
/
f
to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
F
/
f
.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or
your VCR channel number.
6
Press
to jump to “Confirm”, then press
.
7
Press
f
to select “OK”, then press
.
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
This name will be displayed briefly on the screen when the channel is selected.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
You can adjust the fine tuning over a range of -15 to +15. When “On” is selected, the
fine tuning is performed automatically.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or
intermittent sound muting when watching mono programmes.
If you do not experience any sound distortion, we recommend that you leave this
option set to the factory setting “Off”.
Notes
• You cannot receive stereo or dual sound when “Low” or “High” is selected.
• “Audio Filter” is not available when “System” is set to “L”.
010COV.book Page 26 Monday, June 12, 2006 3:29 PM
27
GB
KDL-20S2020
2-685-333-41(0)
Using MENU Functions
Skip
Skips unused analogue channels when you press PROG +/- to select channels. (You
can still select a skipped channel using the number buttons.)
Decoder
Views and records the scrambled channel selected when using a decoder connected
directly to scart connector
/
1, or to scart connector
/
2 via a VCR.
Note
Depending on the country/region selected for “Country” (page 5), this option may not be
available.
Confirm
Saves changes made to the “Manual Programme Preset” settings.
010COV.book Page 27 Monday, June 12, 2006 3:29 PM
28
GB
KDL-20S2020
2-685-333-41(0)
Digital Set-up menu
You can change/set the digital settings using the
Digital Set-up menu. To select options in
“Settings”, see “Navigating through menus”
(page 19).
Digital Tuning
Displays the “Digital Tuning” menu.
Digital Auto Tuning
Tunes in all the available digital channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 5). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Programme List Edit
Removes any unwanted digital channels stored on the TV, and changes the order of
the digital channels stored on the TV.
1
Press
F
/
f
to select the channel you want to remove or move to a new
position.
If you know the programme number (frequency)
Press the number buttons to enter the three-digit programme number of the broadcast
you want.
2
Remove or change the order of the digital channels as follows:
To remove the digital channel
Press
. A message that confirms whether the selected digital channel is to be
deleted appears. Press
G
to select “Yes”, then press
.
To change the order of the digital channels
Press
g
, then press
F
/
f
to select the new position for the channel and press
G
.
Repeat the procedure in steps 1 and 2 to move other channels if required.
3
Press RETURN.
Digital Manual Tuning
Tunes the digital channels manually.
1
Press the number button to select the channel number you want to
manually tune, then press
F
/
f
to tune the channel.
2
When the available channels are found, press
F
/
f
to select the channel
you want to store, then press
.
3
Press
F
/
f
to select the programme number where you want to store the
new channel, then press
.
Repeat the procedure above to tune other channels manually.
Set Up
Select:
Enter:
Exit:
MENU
English
-
Back:
Auto Start Up
Language
Country
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme Preset
Digital Set Up
010COV.book Page 28 Monday, June 12, 2006 3:29 PM
29
GB
KDL-20S2020
2-685-333-41(0)
Using MENU Functions
Digital Set-up
Displays the “Digital Set-up” menu.
Subtitle Setting
Displays digital subtitles on the screen.
When “For Hard Of Hearing” is selected, some visual aids may also be displayed
with the subtitles (if TV channels broadcast such information).
Subtitle Language
Selects which language subtitles are displayed in.
Audio Language
Selects the language used for a programme. Some digital channels may broadcast
several audio languages for a programme.
Audio Type
Increases the sound level when “For Hard Of Hearing” is selected.
Parental Lock
Sets an age restriction for programmes. Any programme that exceeds the age
restriction can only be watched after a PIN Code is entered correctly.
1
Press the number buttons to enter your existing PIN code.
If you have not previously set a PIN, a PIN code entry screen appears. Follow the
instruction of “PIN Code” below.
2
Press
F
/
f
to select the age restriction or “None” (for unrestricted
watching), then press
.
3
Press RETURN.
PIN Code
Sets a PIN code for the first time, or allows you to change your PIN code.
1
Enter a PIN as follows:
If you have previously set a PIN
Press the number buttons to enter your existing PIN.
If you have not set a PIN
Press the number buttons to enter the factory setting PIN of 9999.
2
Press the number buttons to enter the new PIN code.
A message appears to inform you that the new PIN has been accepted.
3
Press RETURN.
Tip
PIN code 9999 is always accepted.
Technical Set-up
Displays the Technical Set-up menu.
“Auto Service Update”: Enables the TV to detect and store new digital services as
they become available.
“Software Download”: Enables the TV to automatically receive software updates,
free through your existing aerial (when issued). Sony recommends that this option is
set to “On” at all times. If you do not want your software to be updated, set this option
to “Off”.
“System Information”: Displays the current software version and the signal level.
“Time Zone”: Allows you to select the correct time zone for your country.
CA Module Set-up
Allows you to access a Pay Per View service once you obtain a Conditional Access
Module (CAM) and a view card. See page 30 for the location of the
(PCMCIA)
socket.
010COV.book Page 29 Monday, June 12, 2006 3:29 PM
30
GB
KDL-20S2020
2-685-333-41(0)
Connecting optional equipment
Using Optional Equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (side)
Headphones
S VHS/Hi8/DVC
camcorder
To connect
Do this
Conditional Access
Module (CAM)
A
To use Pay Per View services.
For details, refer to the instruction
manual supplied with your CAM.
To use the CAM, remove the
rubber cover from the CAM slot.
Switch off the TV when inserting
your CAM into the CAM slot.
When you do not use the CAM, we
recommend that you replace the
cover on the CAM slot.
S VHS/Hi8/DVC
camcorder
B
Connect to the S video socket
4 or the video socket
4,
and the audio sockets
4. To
avoid picture noise, do not connect
the camcorder to the video socket
4 and the S video socket
4 at the same time. If you
connect mono equipment, connect
to the L socket
4, and set
“Dual Sound” to “A” (page 21).
Headphones
C
Connect to the
i
socket to listen to
sound from the TV on headphones.
010COV.book Page 30 Monday, June 12, 2006 3:29 PM
31
GB
KDL-20S2020
2-685-333-41(0)
Using Optional Equipment
Connecting to the TV (rear)
DVD player
with component output
DVD player
Decoder
DVD recorder
VCR
Video game
equipment
DVD player
Digital satellite
receiver
PC
Decoder
To connect
Do this
PC
D
Connect to the PC
5/
5
sockets. It is recommended to use
a PC cable with ferrites.
Digital satellite
receiver or DVD
player
E
Connect to the HDMI IN 6 socket
if the equipment has a HDMI
socket. The digital video and audio
signals are input from the
equipment. If the equipment has a
DVI socket, connect the DVI
socket to the HDMI IN 6 socket
through a DVI - HDMI adaptor
interface (not supplied), and
connect the equipment’s audio out
sockets to the audio in HDMI IN 6
sockets.
Notes
• The HDMI sockets only support
the following Video inputs: 480i,
480p, 576i, 576p, 720p and
1080i. To connect a PC, please
use the PC input socket.
• Use HDMI certified cable with
HDMI logo.
DVD player with
component output
F
Connect to the component sockets
and the audio sockets
/
3.
Video game
equipment, DVD
player or decoder
G
Connect to the scart socket
/
1. When you connect the
decoder, the scrambled signal from
the TV tuner is output to the
decoder, then the unscrambled
signal is output from the decoder.
DVD recorder or
VCR that supports
SmartLink
H
Connect to the scart socket
/
2. SmartLink is a direct link
between the TV and a VCR/DVD
recorder.
010COV.book Page 31 Monday, June 12, 2006 3:29 PM
32
GB
KDL-20S2020
2-685-333-41(0)
Specifications
Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
20 inches
Display Resolution:
1,366 dots (horizontal) × 768 lines (vertical)
Power Consumption:
65 W or less
Standby Power Consumption:
1 W or less
Dimensions (w × h × d):
Approx. 500 × 406 × 209 mm (with stand)
Approx. 500 × 370 × 100 mm (without stand)
Mass:
Approx. 8 kg (with stand)
Approx. 7 kg (without stand)
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Analogue:
Depending on your country/region selection:
B/G/H, D/K, L, I
Digital:
DVB-T
Colour/Video System
Analogue:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Digital:
MPEG-2 MP@ML
Aerial
75 ohm external terminal for VHF/UHF
Channel Coverage
Analogue:
VHF:
E2–E12
UHF:
E21–E69
CATV:
S1–S20
HYPER: S21–S41
D/K:
R1–R12, R21–R69
L:
F2–F10, B–Q, F21–F69
I:
UHF B21–B69
Digital:
VHF/UHF
Terminals
/
1
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, and TV audio/video
output.
/
2 (SmartLink)
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, selectable audio/video
output, and SmartLink interface.
3
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
3
Audio input (phono jacks)
500 mVrms
Impedance: 47 kilo ohms
4 S video input (4-pin mini DIN)
4
Video input (phono jack)
4
Audio input (phono jacks)
PC
5 PC Input (15 Dsub) (see page 31)
G: 0.7 Vp-p, 75 ohms, non Sync on Green
B: 0.7 Vp-p, 75 ohms, non Sync on Green
R: 0.7 Vp-p, 75 ohms, non Sync on Green
HD: 1-5 Vp-p
VD: 1-5 Vp-p
5 PC audio input (minijack)
HDMI IN 6
Video: 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits,
or analogue audio input (phono jacks)
i
Headphones jack
CAM (Conditional Access Module) slot
Sound Output
5 W + 5 W (RMS)
Supplied Accessories
Refer to “1: Checking the accessories” on page 4.
Design and specifications are subject to change
without notice.
PC Input Signal Reference Chart
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you will see the
message “NO SYNC”.
Additional Information
Signals
Horizontal (Pixel)
Vertical (Line)
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Standard
VGA
640
480
31.5
60
VGA
SVGA
800
600
37.9
60
VESA Guidelines
XGA
1024
768
48.4
60
VESA Guidelines
WXGA
1280
768
47.4
60
VESA
1280
768
47.8
60
VESA
010COV.book Page 32 Monday, June 12, 2006 3:29 PM
33
GB
KDL-20S2020
2-685-333-41(0)
Additional Information
Troubleshooting
Check whether the
1
(standby) indicator is flashing in red.
When it is flashing
The self-diagnosis function is activated.
1
Measure how long the
1
(standby) indicator flashes and stops flashing.
For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds.
2
Press
1
on the TV (top side) to switch it off, disconnect the mains lead, and inform your dealer or
Sony service centre of how the indicator flashes (duration and interval).
When it is not flashing
1
Check the items in the tables below.
2
If the problem still persists, have your TV serviced by qualified service personnel.
Picture
Problem
Cause/Remedy
No picture (screen is dark) and
no sound
• Check the aerial connection.
• Connect the TV to the mains, and press
1
on the TV (top side).
• If the
1
(standby) indicator lights up in red, press
"
/
1
.
No picture or no menu
information from equipment
connected to the scarts or
HDMI IN socket
• Check that the optional equipment is on and press
/
repeatedly until
the correct input symbol is displayed on the screen.
• Check the connection between the optional equipment and the TV.
• When connecting any equipment to the HDMI IN 6 socket or when
changing the resolution, some dots can appear blinking on the screen for a
few seconds. HDMI signal decoding is in progress and it does not indicate a
malfunction.
Double images or ghosting
• Check aerial/cable connections.
• Check the aerial location and direction.
Only snow and noise appear
on the screen
• Check if the aerial is broken or bent.
• Check if the aerial has reached the end of its serviceable life (three to five
years in normal use, one to two years at the seaside).
Distorted picture (dotted lines
or stripes)
• Keep the TV away from electrical noise sources such as cars, motorcycles,
hair-dryers or optical equipment.
• When installing optional equipment, leave some space between the optional
equipment and the TV.
• Make sure that the aerial is connected using the supplied coaxial cable.
• Keep the aerial cable away from other connecting cables.
Picture noise when viewing a
TV channel
• Select “Manual Programme Preset” in the “Set-Up” menu and adjust “AFT”
(Automatic Fine Tuning) to obtain better picture reception (page 26).
Some tiny black points and/or
bright points on the screen
• The picture of a display unit is composed of pixels. Tiny black points and/or
bright points (pixels) on the screen do not indicate a malfunction.
No colour on programmes
• Select “Reset” in the “Picture Adjustment” menu to return to the factory
settings (page 20).
No colour or irregular colour
when viewing a signal from the
Y, P
B
/C
B
, P
R
/C
R
jacks of
3
• Check the connection of the Y, P
B
/C
B
, P
R
/C
R
jacks of
3.
• Make sure that the Y, P
B
/C
B
, P
R
/C
R
jacks of
3 are firmly seated in their
respective sockets.
010COV.book Page 33 Monday, June 12, 2006 3:29 PM
34
GB
KDL-20S2020
2-685-333-41(0)
Sound
Problem
Cause/Remedy
No sound, but good picture
• Press
2
+/– or
%
(Mute).
• Check that “TV Speakers” is set to “On” in the “Sound Adjustment” menu
(page 22).
Noisy sound
• See the “Picture noise” causes/remedies on page 33.
Channels
Problem
Cause/Remedy
The desired channel cannot be
selected
• Switch between digital and analogue mode and select the desired digital/
analogue channel.
Some channels are blank
• Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
Digital channel is not displayed
• Check that the aerial is plugged directly into the TV (not through other
equipment).
• Contact a local installer to find out if digital transmissions are provided in
your area.
• Upgrade to a higher gain aerial.
General
Problem
Cause/Remedy
The TV turns off automatically
(the TV enters standby mode)
• Check if the “Sleep Timer” is activated, or confirm the setting of “Off Time”
(page 24).
• If no signal is received and no operation is performed in the TV mode for
10 minutes, the TV automatically switches to standby mode.
The TV turns on automatically
• Check if the “On Time” is activated (page 24).
Some input sources cannot be
selected
• Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input
source (page 25).
The remote does not function
• Replace the batteries.
010COV.book Page 34 Monday, June 12, 2006 3:29 PM
35
GB
KDL-20S2020
2-685-333-41(0)
Additional Information
Index
Numerics
14:9
14
4:3
14
A
Aerial, connecting
4
AFT
26
Audio Filter
26
Audio Language
29
Audio Type
29
Auto Start-up
25
Auto Tuning
analogue and digital channels
6
analogue channels only
25
digital channels only
28
Auto Volume
21
AV Preset
25
AV2 Output
23
B
Backlight
20
Balance
21
Bass
21
Batteries, inserting into the remote
4
BBE
21
Brightness
20
C
CA Module Set-up
29
Category list
15
Channels
auto-tuning
6
selecting
13
Skip
27
Clock Set
24
Colour
20
Colour Tone
20
Confirm
27
Connecting
an aerial/VCR
4
optional equipment
30
Contrast
20
Country
5
,
25
D
Digital Auto Tuning
28
Digital Manual Tuning
28
Digital Set-up
29
Digital Set-up menu
28
Digital Tuning
28
Dolby Virtual
21
Dual Sound
21
E
EPG (Digital Electronic Programme
Guide)
15
Equipment labels
25
F
Fastext
14
Favourite list
17
Features menu
23
H
Headphones
connecting
30
Hue
20
I
Input signal index table
18
L
Label
26
Language
5
,
25
M
Manual Programme Preset
26
Manual timer REC
16
MENU
19
N
Noise Reduction
20
P
Parental Lock
29
PC Adjustment
24
Picture menu
20
Picture Mode
20
Picture Off (
) indicator
12
PIN Code
29
PIP (Picture in Picture)
14
Power (
"
) indicator
12
Power (
1
) switch
12
Power Saving
23
Programme index table
13
Programme List Edit
28
Programme Sorting
25
R
Reminder
16
Remote control
inserting batteries
4
overview
11
sensor
12
Reset
picture
20
sound
21
RGB Center
23
S
Screen
23
Screen mode
14
Set-up menu
25
Sharpness
20
Skip
25
,
27
Smart
14
Sound
11
Sound Adjustment menu
21
Sound Effect
21
Sound Offset
25
Specifications
32
Standby (
1
) indicator
12
Subtitle Language
29
Subtitle Setting
29
T
Technical Set-up
29
Text
14
Timer
24
Timer (
) indicator
12
Timer list
16
Timer REC
15
Treble
21
TV Speakers
22
V
VCR
connecting
4
recording
15
W
Wide
14
Z
Zoom
14
010COV.book Page 35 Monday, June 12, 2006 3:29 PM
KDL-20S2020
2-685-333-41(0)
2
RU
Благодарим
Вас
за
то
,
что
Вы
выбрали
этот
телевизор
Sony.
Перед
первым
включением
телевизора
внимательно
ознакомьтесь
с
данной
инструкцией
по
эксплуатации
и
сохраните
ее
для
консультаций
в
будущем
.
•
Все
функции
,
относящиеся
к
Цифровому
ТВ
(
),
будут
действовать
только
в
тех
странах
или
регионах
,
в
которых
ведется
эфирная
цифровая
трансляция
сигнала
DVB-T (MPEG2).
Просим
Вас
уточнить
у
своего
дилера
,
можно
ли
принимать
сигнал
DVB-T
там
,
где
Вы
живете
.
•
Хотя
данный
телевизор
следует
характеристикам
DVB-T,
мы
не
можем
гарантировать
его
совместимость
с
будущим
вещанием
в
формате
DVB-
T.
•
Некоторые
из
функций
Цифрового
ТВ
в
некоторых
странах
могут
быть
недоступными
.
Информация о торговых марках
•
является
зарегистрированной
торговой
маркой
DVB Project
•
Произведено
по
лицензии
компании
BBE Sound, Inc.
Лицензия
BBE Sound, Inc.
зарегистрирована
по
патентам
США
: 5510752, 5736897.
Слово
"BBE"
и
логотип
BBE
являются
торговыми
марками
компании
BBE Sound, Inc.
•
Произведено
по
лицензии
компании
Dolby
Laboratories. "Dolby"
и
логотип
с
двойной
буквой
D
являются
торговыми
марками
компании
Dolby
Laboratories.
•
В
данном
телевизоре
используется
технология
High-Definition Multimedia Interface (HDMI™) .
HDMI,
логотип
HDMI
и
High-Definition Multimedia
Interface
являются
зарегистрированными
торговыми
марками
компании
HDMI Licensing LLC.
Введение
Примечание в отношении
Цифрового ТВ
Иэготовлено в:
Сони Спзйн С.А. завод в Барселоне
Пол. Кан Митьянс с/н 08232
Виладекавальс, Барселона,
Испания
Manufactured in:
Sony Spain S. A.
Pol. Ind. Can Mitjans s/n
08232 Viladecavalls (Barcelona)
Spain
010COV.book Page 2 Monday, June 12, 2006 3:30 PM
3
RU
KDL-20S2020
2-685-333-41(0)
Содержание
Начало работы 4
Сведения по безопасности ....................................................................................................7
Меры предосторожности .....................................................................................................10
Описание пульта ДУ .............................................................................................................11
Описание кнопок и индикаторов телевизора...............................................................12
Просмотр телевизионных программ ...................................................................................13
Использование цифрового электронного экранного телегида (EPG)
...................15
Использование списка предпочитаемых программ
.................................................17
Просмотр изображения с устройств, подключенных к телевизору ................................18
Навигация по системе меню ................................................................................................19
Меню "Настройка изображения" ........................................................................................20
Меню "Настройка звука" .....................................................................................................21
Меню "Функции"....................................................................................................................23
Меню "Установка" ................................................................................................................25
Меню "Цифровая конфигурация"
.............................................................................28
Подключение дополнительных устройств .........................................................................30
Технические характеристики ..............................................................................................32
Поиск неисправностей .........................................................................................................33
Указатель ..............................................................................................................................35
Начало работы
4
Просмотр телевизора
Использование MENU функций
Использование дополнительных устройств
Дополнительные сведения
RU
:
только
для
цифровых
каналов
010COV.book Page 3 Monday, June 12, 2006 3:30 PM
4
RU
KDL-20S2020
2-685-333-41(0)
Начало работы
1: Проверка комплекта поставки
Пульт ДУ RM-ED007 (1)
Батарейки размера AA (типа R6) (2)
Держатель кабеля (1)
Ремень для крепления (1) и винты (2)
Установка батареек в пульт ДУ
Примечания
• Вставляя батарейки, соблюдайте полярность.
• При утилизации батареек всегда помните правила
защиты окружающей среды. В некоторых регионах
правила утилизации батареек могут быть
регламентированы. Просьба обращаться по этому
поводы в местные органы власти.
• Не используйте одновременно батарейки различных
типов или старые и новые батарейки.
• Бережно обращайтесь с пультом ДУ. Не бросайте
его, не становитесь на него и не лейте на него никаких
жидкостей.
• Не оставляйте пульт ДУ вблизи источников тепла
или в месте, подверженном прямому воздействию
солнечных лучей, или во влажном помещении.
2: Подключение антенны/ видеомагнитофона
Подключения одной
антенны
Подключение антенны и
видеомагнитофона
Коаксиальный
кабель (не входит в
комплект поставки)
Scart-кабель (не входит в
комплект поставки)
ВЧ кабель
(не входит в
комплект
поставки)
Видеомагнитофон
010COV.book Page 4 Monday, June 12, 2006 3:30 PM
5
RU
KDL-20S2020
2-685-333-41(0)
Начало работы
3: Крепление кабелей 4: Меры по предотвращению падения телевизора 5: Выбор языка и страны/региона
1
A
B
2
3
2
3
1
2
1
3,4
2
Продолжение
010COV.book Page 5 Monday, June 12, 2006 3:30 PM
6
RU
KDL-20S2020
2-685-333-41(0)
1
Включите телевизор в сеть
(220-240 В переменного тока, 50 Гц).
2
Нажмите кнопку
1
на телевизоре (на
его верхней панели).
При первом включении телевизора на его
экране автоматически появляется меню
"Язык" (Language).
Если телевизор находится в дежурном
режиме (индикатор дежурного режима
1
на передней панели телевизора горит
красным цветом), нажмите кнопку
"/1
на
пульте ДУ для включения телевизора.
3
Нажимая
F
/
f
, выберите из
появившегося на экране меню нужный
Вам язык, затем нажмите кнопку
.
4
С помощью кнопок
F
/
f
выберите
страну/регион, в которой Вы хотите
использовать телевизор, затем
нажмите кнопку
.
Если страны/региона, в которой Вы хотите
пользоваться телевизором, нет в списке,
вместо страны/региона выберите "-"
На экране телевизора появится cообщение
о начале выполнения автонастройки, см.
раздел “6: Автонастройка телевизора”.
6: Автонастройка телевизора
После выбора языка и страны/региона экране
появляется сообщение с подтверждением
начала автонастройки.
Телевизор начнет поиск и сохранение всех
доступных телевизионных каналов.
1
Нажмитe .
Телевизор начнет автоматический поиск
всех доступных цифровых, а затем
аналоговых каналов. Это может занять
некоторое время. Пожалуйста, подождите
и не нажимайте никакие кнопки ни на
телевизоре, ни на пульте ДУ.
В случае появления на экране
сообщения:
"Ни один цифровой или аналоговый канал
не найден" проверьте, правильно ли
подключена антенна, и нажмите кнопку
, чтобы запустить процедуру
автонастройки повторно.
2
При появлении на экране меню
"Сортировка программ", выполните
операции, указанные в разделе
“Сортировка программ” (стр. 25) .
Если Вы не хотите менять порядок, в котором
аналоговые каналы сохранены в памяти
Вашего телевизора, перейдите к шагу 3.
3
Для выхода из меню нажмите кнопку
MENU.
Теперь телевизор настроен на прием всех
доступных каналов.
Auto Start Up
Language
Country
Select:
Confirm:
Автозапуск
Язык
C
трана
Выбр
.:
По
д
твер
.:
1
3
Наза
д
:
Запуск
:
Автонастройка
Вы
хотите
начать автоматическую настройку?
O
тказ
:
MENU
010COV.book Page 6 Monday, June 12, 2006 3:30 PM
