Sony KV-21LS30K: Introducing and Using the Menu System
Introducing and Using the Menu System: Sony KV-21LS30K
Introducing and Using the Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the
following buttons on the Remote Control to operate the menu system:
1 Press the MENU button to switch the first level menu on.
MENU
2 • To highlight the desired menu or option, press or .
• To enter to the selected menu or option, press .
• To return to the last menu or option, press .
K
• To alter settings of your selected option, press //or.
• To confirm and store your selection, press OK.
3 Press the MENU button to remove the menu from the screen.
MENU
GB
Menu Guide
Level 1 Level 2 Level 3 / Function
Picture Adjustment
PICTURE ADJUSTMENT
Picture Adjustment
Mode: Personal
Mode: Personal
The “Picture Adjustment” menu allows you to
Contrast
Contrast
Brightness
Brightness
Colour
Colour
alter the picture adjustments.
Sharpness
Sharpness
Hue
Hue
Reset
Reset
OK
OK
To do this: after selecting the item you want to
alter press , then press repeatedly / /
or to adjust it and finally press OK to
store the new adjustment.
This menu also allows you to customise the
picture mode based on the programme you are
watching:
Personal (for individual settings).
Live (for live broadcast programmes).
Movie (for films).
• Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.
• Hue is only available for NTSC colour signal (e.g: USA video tapes).
• Select Reset and press OK to reset the picture to the factory preset levels.
continued...
Menu System
9
Level 1 Level 2 Level 3 / Function
Picture Adjustment
SOUND ADJUSTMENT
Mode: Personal
Contrast
The “Sound Adjustment” menu allows you to
Brightness
Colour
alter the sound adjustments.
Sharpness
Hue
Reset
OK
To do this: after selecting the item you want to
alter, press . then press repeatedly /
/ or to adjust it and finally press OK
Sound Adjustment
Sound Adjustment
Mode: Personal
Mode: Personal
to store the new adjustment.
Treble
Treble
Bass
Bass
Balance
Balance
Reset
Reset
Dual Sound: Mono
Dual Sound: Mono
Detail Adjustment
Detail Adjustment
OK
OK
This menu also contains two submenus as following:
Mode Personal (for individual settings)
Rock
Pop
Jazz
Detail Adjustment Sound Effect: Off: Normal.
Spatial: Acoustic sound effect.
Auto volume: Off: Volume channel changes according
to the broadcast signal.
On: Volume level of the channels will
stay the same, independent of the
broadcast signal (e.g. in the case of
advertisements).
TV Speakers: Off: Sound from external amplifier
connected to the audio outputs on
the rear of the TV set.
On: Sound from the TV set.
• Treble and Bass can only be altered if “Personal” mode is selected.
• Select Reset and press OK to reset the sound to the factory preset levels.
• In case of a bilingual broadcast select Dual Sound and set A for sound channel 1, B for sound channel
2 or Mono for mono channel if available. For a stereo broadcast you can choose Stereo or Mono.
continued...
10
Menu System
Level 1 Level 2 Level 3 / Function
Picture Adjustment
SLEEP TIMER
Mode: Personal
Contrast
The “Sleep Timer” option in the “Timer” menu
Brightness
Colour
allows you to select a time period for the TV to
Sharpness
Hue
Reset
switch itself automatically into the standby
OK
mode.
To do this: after selecting the option press ,
Timer
Timer
then press or to set the time period delay
Sleep Timer: Off
Sleep Timer: Off
On Timer: Off
On Timer: i Off
(max. of 4 hours) and finally press OK to store.
• While watching the TV, you can press the
OK
OK
button on the remote control to display the
time remaining.
• One minute before the TV switches itself into
standby mode, the time remaining is displayed on
the TV screen automatically.
ON TIMER
Picture Adjustment
The “On Timer” option in the “Timer” menu
Mode: Personal
Contrast
Brightness
allows you to select a time period for the TV to
Colour
Sharpness
switch itself automatically on from standby
Hue
Reset
mode.
OK
GB
To do this: after selecting the option press ,
then press or to set the time period delay
Timer
Timer
(max. 12 hours) and press OK to store. Finally
Sleep Timer: Off
Sleep Timer: Off
press the standby button
on the remote
On Timer: Off
On Timer: Off
control. After the selected length of time the TV
switches on automatically.
OK
OK
• The standby indicator on the TV set flashes
regularly to indicate that “On Timer” is active.
• Any loss of power will cause these settings to be
cleared.
If you have not activated the “On Timer”
option but the indicator on the TV set
flashes, please contact to your nearest
Sony Service Centre.
Picture Adjustment
LANGUAGE / COUNTRY
Mode: Personal
Contrast
The “Language/Country” option in the “Set
Brightness
Colour
Up” menu allows you to select the language
Sharpness
Hue
that the menus are displayed in. It also allows
Reset
you to select the country in which you wish to
OK
operate the TV set.
Set Up
Set Up
To do this: after selecting the option, press
Language/Country
Language/Country
Auto Tuning
Auto Tuning
and then proceed in the same way as in the
Programme Sorting
Programme Sorting
Progamme Labels
Progamme Labels
steps 2 and 3 of the section “Switching On the
AV Preset
AV Preset
Manual Programme Preset
Manual Programme Preset
TV and Automatically Tuning”.
Detail Set Up
Detail Set Up
OK
OK
continued...
Menu System
11
Level 1 Level 2 Level 3 / Function
AUTO TUNING
Picture Adjustment
Mode: Personal
The “Auto Tuning” option in the “Set Up”
Contrast
Brightness
menu allows you to automatically search for
Colour
Sharpness
Hue
and store all available TV channels.
Reset
OK
To do this: after selecting the option, press
and then proceed in the same way as in TV
steps 5 and 6 of the section “Switching On the
Set Up
Set Up
Language/Country
TV and Automatically Tuning”.
Language/Country
Auto Tuning
Auto Tuning
Programme Sorting
Programme Sorting
Progamme Labels
Progamme Labels
AV Preset
AV Preset
Manual Programme Preset
Manual Programme Preset
Detail Set Up
Detail Set Up
OK
OK
PROGRAMME SORTING
Picture Adjustment
Mode: Personal
The “Programme Sorting” option in the “Set
Contrast
Brightness
Colour
Up” menu allows you to change the order in
Sharpness
Hue
which the channels (TV Broadcast) appear on
Reset
the screen.
OK
To do this: after selecting the option, press
Set Up
Set Up
Language/Country
Language/Country
and then proceed in the same way as in step 7 b)
Auto Tuning
Auto Tuning
Programme Sorting
Programme Sorting
of the section “Switching On the TV and
Progamme Labels
Progamme Labels
AV Preset
AV Preset
Automatically Tuning”.
Manual Programme Preset
Manual Programme Preset
Detail Set Up
Detail Set Up
OK
OK
PROGRAMME LABELS
Picture Adjustment
Mode: Personal
The “Programme Labels” option in the “Set
Contrast
Brightness
Colour
Up” menu allows you to name a channel using
Sharpness
Hue
up to five characters (letters or numbers).
Reset
OK
To do this:
1 After selecting the option, press , then
Set Up
Set Up
Language/Country
Language/Country
press or to select the programme
Auto Tuning
Auto Tuning
Programme Sorting
Programme Sorting
number with the channel you wish to name.
Progamme Labels
Progamme Labels
AV Preset
AV Preset
Manual Programme Preset
Manual Programme Preset
2 Press . With the first element of the Label
Detail Set Up
Detail Set Up
column highlighted, press or to select
OK
OK
a letter or number (select “-“ for a blank), then
press to confirm this character. Select the
other four characters in the same way. Finally
press OK to store.
Picture Adjustment
AV PRESET
Mode: Personal
Contrast
The “AV Preset” option in the “Set Up” menu
Brightness
Colour
allows you to designate a name to the external
Sharpness
Hue
equipment you have connected to the sockets of
Reset
this TV.
OK
To do this:
Set Up
Set Up
1 After selecting the option, press , then
Language/Country
Language/Country
Auto Tuning
Auto Tuning
Programme Sorting
Programme Sorting
press or to select the input source you
Progamme Labels
Progamme Labels
AV Preset
AV Preset
wish to name (AV1 and AV2 are for the rear
Manual Programme Preset
Manual Programme Preset
Detail Set Up
Detail Set Up
Scarts and AV3 for front connectors). Then
OK
OK
press .
continued...
12
Menu System
Level 1 Level 2 Level 3 / Function
2 In the label column automatically appears a
label:
a) If you want to use one of the 6 predefined
label (CABLE, GAME, CAM, DVD,
VIDEO or SAT), press or to select
the desired label and finally press OK to
store.
b) If you want to set a different label, select
Edit and press . Then with the first
element highlighted, press or to
select a letter, number or “-“ for a blank,
then press to confirm this character.
Select the other four characters in the same
way and finally press OK to store.
Picture Adjustment
MANUAL PROGRAMME PRESET
Mode: Personal
The “Manual Programme Preset” option in the
Contrast
Brightness
Colour
“Set Up” menu allows you to:
Sharpness
Hue
Reset
a) Preset channels or a video input source one
OK
by one to the programme order of your
choice. To do this:
Set Up
Set Up
Language/Country
Language/Country
1 After selecting the ”Manual Programme
Auto Tuning
Auto Tuning
GB
Programme Sorting
Programme Sorting
Progamme Labels
Progamme Labels
Preset” option, press then with
AV Preset
AV Preset
Manual Programme Preset
Manual Programme Preset
Programme option highlighted press .
Detail Set Up
Detail Set Up
OK
OK
Press or to select on which
programme number you want to preset the
channel (for VCR, select programme number
“0”). Then press .
2 The following option is only available
depending on the country you have
selected in the “Language/Country”
menu.
After selecting the System option, press .
Then press or to select the TV
Broadcast system (B/G for western European
countries or D/K for eastern European
countries). Then press .
3 After selecting the Channel option, press .
Then press or to select the channel
tuning (“C” for terrestrial channels or “S” for
cable channels). Next press . After that,
press the number buttons to enter directly the
channel number of the TV Broadcast or the
channel of the VCR signal. If you do not
know the channel number, press or to
search for it. When you tune the desired
channel, press OK twice to store.
Repeat all the above steps to tune and store more
channels.
continued...
Menu System
13
Level 1 Level 2 Level 3 / Function
Picture Adjustment
b) Label a channel using up to five characters.
Mode: Personal
Contrast
Brightness
To do this: Highlighting the Programme
Colour
Sharpness
option, press the PROGR +/- button to select
Hue
Reset
the programme number with the channel
OK
you wish to name. When the programme you
want to name appears on the screen, select
Set Up
Set Up
Language/Country
Language/Country
the Label option and press . Next
Auto Tuning
Auto Tuning
Programme Sorting
Programme Sorting
press or to select a letter, number or
Progamme Labels
Progamme Labels
AV Preset
AV Preset
Manual Programme Preset
Manual Programme Preset
“-“ for a blank. Press to confirm this
Detail Set Up
Detail Set Up
character. Select the other four characters in
OK
OK
the same way. After selecting all the
characters, press OK twice to store.
c)Normally the automatic fine tuning (AFT) is
operating, however you can manually fine
tune the TV to obtain a better picture
reception in the case that the picture is
distorted.
To do this: while watching the channel (TV
Broadcast) you wish to fine tune, select the
AFT option and press . Next press
or to adjust the fine tuning between -15
and +15. Finally press OK twice to store.
d) Skip any unwanted programme numbers
when they are selected with the PROGR +/-
buttons.
To do this: Highlighting the Programme
option, press the PROGR +/- button to select
the programme number you want to skip.
When the programme you want to skip
appears on the screen, select the Skip option
and press . Next press or to select
Yes. Finally press OK twice to confirm and
store.
To cancel this function afterwards, select “No”
instead of “Yes” in the step above.
e) This option allows you to view and record
correctly scrambling channels when using a
decoder connected to the Scart
:2/
S
directly or through a VCR.
This option is only available depending
on the country you have selected in the
“Language/Country” menu.
To do this: select the Decoder option and
press . Next press or to select On.
Finally press OK twice to confirm and store.
To cancel this function afterwards, select “Off”
instead of “On” in the step above.
continued...
14
Menu System
Level 1 Level 2 Level 3 / Function
NOISE REDUCTION
Picture Adjustment
Mode: Personal
The “Noise Reduction” option in the “Detail Set
Contrast
Brightness
Colour
Up” menu allows you to automatically reduce
Sharpness
Hue
the picture noise visible in the broadcast signal.
Reset
OK
To do this: after selecting the option, press .
Set Up
Detail Set Up
Then press or to select Auto. Finally
Language/Country
Noise Reduction:
Auto
Auto Tuning
AV2 Output:
TV
press OK to confirm and store.
Programme Sorting
RGB Centring:
0
Progamme Labels
Picture Rotation:
0
AV Preset
Manual Programme Preset
To cancel this function afterwards, select “Off”
Detail Set Up
OK
instead of “Auto” in the step above.
OK
Picture Adjustment
AV2 OUTPUT
Mode: Personal
Contrast
The “AV2 Output” option in the “Detail Set
Brightness
Colour
Up” menu allows you to select the source to be
Sharpness
Hue
Reset
output from the Scart connector :2/q in
OK
order you can record from this Scart any signal
coming from the TV or from an external
Set Up
Detail Set Up
equipment connected to the Scart connector
Language/Country
Noise Reduction:
Auto
Auto Tuning
AV2 Output:
TV
Programme Sorting
RGB Centring:
0
:1/ or front connectors 3 and 3.
Progamme Labels
Picture Rotation:
0
AV Preset
Manual Programme Preset
GB
Detail Set Up
OK
If your VCR supports Smartlink, this
OK
procedure is not necessary.
To do this: after selecting the option, press .
Then press or to select the desired
output signal: TV, AV1, AV3 or AUTO.
If you select “AUTO”, the output signal
will always be the same one that is
displayed on the screen.
If you have connected a decoder to the
Scart
:2/q or to a VCR connected to
this Scart, please remember to change back
the “AV2 Output” to “AUTO” or “TV” for
correct unscrambling.
continued...
Menu System
15
Level 1 Level 2 Level 3 / Function
RGB CENTRING
Picture Adjustment
Mode: Personal
When connecting an RGB source, such as a
Contrast
Brightness
Colour
“PlayStation”, you may need to readjust the
Sharpness
Hue
horizontal position of the picture. In that case,
Reset
OK
you can readjust it through the “RGB Centring”
option in the “Detail Set Up”.
Detail Set Up
Set Up
Noise Reduction:
Language/Country
Auto
AV2 Output:
TV
Auto Tuning
To do this: while watching an RGB source select
RGB Centring:
0
Programme Sorting
Picture Rotation:
0
Progamme Labels
the “RGB Centring” option and press . Then
AV Preset
Manual Programme Preset
Detail Set Up
press or to adjust the centre of the
OK
OK
picture between –10 and +10. Finally press OK
to confirm and store.
PICTURE ROTATION
Picture Adjustment
Mode: Personal
Because of the earth’s magnetism, the picture
Contrast
Brightness
Colour
might slant. In this case, you can correct the
Sharpness
Hue
pictures slant by using the option “Picture
Reset
OK
Rotation” in the “Detail Set Up” menu.
Detail Set Up
To do this: after selecting the option, press .
Set Up
Language/Country
Noise Reduction:
Auto
Auto Tuning
AV2 Output:
TV
Then press or to correct any slant of the
Programme Sorting
RGB Centring:
0
Progamme Labels
Picture Rotation:
0
picture between -5 and +5 and finally press OK
AV Preset
Manual Programme Preset
Detail Set Up
to store.
OK
OK
16
Menu System
Оглавление
- Introduction
- Safety Information
- Overview of Remote Control Buttons
- Overview of TV Buttons
- Switching On the TV and Automatically Tuning
- Introducing and Using the Menu System
- Teletext
- Connecting Optional Equipment
- Using Optional Equipment
- Specifications
- Troubleshooting
- Увод
- Техника на безопасност
- Основно описание на бутоните на дистанционното управление
- Основно описание на бутоните на телевизора Инсталиране на батериите в устройството за дистанционно управление
- Включване и автоматично настройване на телевизора
- Увод и боравене със системата от менюта
- Телетекст
- Свързване на допълнителни апарати
- Боравене с допълнителни апарати
- Характеристики
- Отстраняване на неизправности
- Úvod
- Bezpečnostní opatření
- Všeobecný přehled tlačítek dálkového ovladače
- Všeobecný přehled tlačítek televizoru
- Zapnutí a automatické naladění TV
- Úvod a použití různých menu
- Teletext
- Připojení přídavných zařízení
- Použití přídavných zařízení
- Technické údaje
- Řešení problémů
- Bevezetés
- Biztonsági előírások
- A távvezérlő gombjainak általános leírása
- A televízió gombjainak általános leírása
- A TV bekapcsolása és automatikus hangolás
- Bevezetés a képernyő menürendszereibe és azok használata
- Teletext
- Választható készülékek csatlakoztatása
- Választható készülékek használata
- Műszaki jellemzők
- Problémamegoldás
- Wprowadzenie
- Informacje dotyczące bezpieczeństwa
- Ogólny przegląd przycisków pilota
- Ogólny przegląd przycisków telewizora
- Włączanie telewizora i automatyczne programowanie
- Wprowadzenie do systemu menu na ekranie
- Telegazeta
- Podłączanie dodatkowych urządzeń
- Zastosowanie dodatkowych urządzeń
- Dane techniczne
- Rozwiązywanie problemów
- Введение
- О
- Назначение кнопок на пульте дистанционного управления
- Общее описание кнопок телевизора
- Включение и автоматическая настройка телевизора
- Введение и работа с системой меню
- Телетекст
- Подключение дополнительных устройств
- Использование дополнительных устройств
- Спецификации
- Выявление неисправностей
