Sony KDL-52X2000: Programming the

4 Switch on your equipment and check that

the following main functions work.

Programming the

H (playback), x (stop), m (rewind), M (fast

forward), channel selection for both VCR and

remote

DVDs, TOP MENU/MENU and

F/f/G/g only

for DVDs.

This remote is preset to operate Sony TVs, most Sony

DVDs, VCRs and AMPs (Home Theatre, etc.).

If your equipment is not working, or some of the

functions do not work

To control VCRs and DVDs of other manufacturers

(and some other Sony VCR, DVD and AMP models),

Enter the correct code or try the next code listed

do the following procedure to programme the remote.

for the brand. However, not all models of every

brand may be covered.

Note

Before you start, look up the three-digit code for your brand

To return to normal TV operation

of DVD, VCR or AMP from the “Manufacturer’s codes” on

Press the TV function button.

page 44.

Manufacturer’s codes

VCR brand list

Brand Code

1

SONY 301, 302, 303, 304, 305, 306, 307, 308,

309, 310, 362

2

AIWA 325, 331, 351

AKAI 326, 329, 330

DAEWOO 342, 343

GRUNDIG 358, 355, 360, 361, 320, 351, 366

HITACHI 327, 333, 334

JVC 314, 315, 322, 344, 352, 353, 354, 348,

1

349

3

LG 332, 338

LOEWE 358, 355, 360, 361, 320, 351

MATSUI 356, 357

ORION 328

1 Press and hold the DVD, VCR or AMP

PANASONIC 321, 323

function button you want to programme on

PHILIPS 311, 312, 313, 316, 317, 318, 358, 359,

the remote, then press

, keeping the

363, 364

function button pressed down.

SAMSUNG 339, 340, 341, 345

The selected function button (DVD, VCR or

AMP) will flash.

SANYO 335, 336

2 Press the number buttons to enter the

SHARP 324

three-digit manufacturer’s code number

THOMSON 319, 350, 365

while the button is lit. If code is not entered

TOSHIBA 337

within 10 seconds, you must perform the

step 1 again.

3 Press .

When the programming is correct, the selected

function button will flash twice, and when not, it

will flash five times.

GB

44