Sony DSC-WX60 Black: Notes on using the camera

Notes on using the camera: Sony DSC-WX60 Black

The number in ( ) is the minimum recordable time.

The recordable time of movies varies because the camera is equipped with VBR

(Variable Bit Rate), which automatically adjusts image quality depending on the

shooting scene. When you record a fast-moving subject, the image is clearer but

the recordable time is shorter because more memory is required for recording.

The recordable time also varies depending on the shooting conditions, the subject

or the image quality/size settings.

Notes on using the camera

Functions built into this camera

This manual describes the functions of 1080 60i-compatible devices and 1080 50i-

compatible devices.

To check if your camera is a 1080 60i-compatible device or 1080 50i-compatible

device, check for the following marks on the bottom of the camera.

1080 60i-compatible device: 60i

1080 50i-compatible device: 50i

Do not watch 3D images shot with this camera for extended periods of time on

3D-compatible monitors.

When you view 3D images shot with this camera on a 3D-compatible monitors,

you may experience discomfort in the form of eye strain, fatigue, or nausea. To

prevent these symptoms, we recommend that you take regular breaks. However,

you need to determine for yourself the length and frequency of breaks you require,

as they vary according to the individual. If you experience any type of discomfort,

stop viewing the 3D images until you feel better, and consult a physician as

necessary. Also refer to the operating instructions supplied with the device or

software you have connected or are using with this camera. Note that a child’s

eyesight is still at the development stage (particularly children below the age of 6).

Consult a pediatrician or ophthalmologist before letting your child view 3D

images, and make sure he/she observes the above precautions when viewing such

images.

On use and care

Avoid rough handling, disassembling, modifying, physical shock, or impact such as

hammering, dropping, or stepping on the product. Be particularly careful of the lens.

Notes on recording/playback

Before you start recording, make a trial recording to make sure that the camera is

working correctly.

The camera is neither dust-proof, nor splash-proof, nor water-proof.

Avoid exposing the camera to water. If water enters inside the camera, a

malfunction may occur. In some cases, the camera cannot be repaired.

Do not aim the camera at the sun or other bright light. It may cause the

GB

malfunction of the camera.

28

If moisture condensation occurs, remove it before using the camera.

Do not shake or strike the camera. It may cause a malfunction and you may not be

able to record images. Furthermore, the recording media may become unusable or

image data may be damaged.

Do not use/store the camera in the following places

In an extremely hot, cold or humid place

In places such as in a car parked in the sun, the camera body may become

deformed and this may cause a malfunction.

Under direct sunlight or near a heater

The camera body may become discolored or deformed, and this may cause a

GB

malfunction.

In a location subject to rocking vibration

Near a location that generates strong radio waves, emits radiation or is strongly

magnetic place. Otherwise, the camera may not properly record or play back

images.

In sandy or dusty places

Be careful not to let sand or dust get into the camera. This may cause the camera to

malfunction, and in some cases this malfunction cannot be repaired.

On carrying

Do not sit down in a chair or other place with the camera in the back pocket of your

trousers or skirt, as this may cause malfunction or damage the camera.

Carl Zeiss lens (DSC-WX60/WX80)

The camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp

images with excellent contrast. The lens for the camera has been produced under a

quality assurance system certified by Carl Zeiss in accordance with the quality

standards of Carl Zeiss in Germany.

Notes on the screen and lens

The screen is manufactured using extremely high-precision technology so over

99.99% of the pixels are operational for effective use. However, some tiny black

and/or bright dots (white, red, blue or green) may appear on the screen. These dots

are a normal result of the manufacturing process, and do not affect the recording.

On camera’s temperature

Your camera and battery may get hot due to continuous use, but it is not a

malfunction.

On the overheat protection

Depending on the camera and battery temperature, you may be unable to record

movies or the power may turn off automatically to protect the camera.

A message will be displayed on the screen before the power turns off or you can no

longer record movies. In this case, leave the power off and wait until the camera and

battery temperature goes down. If you turn on the power without letting the camera

and battery cool enough, the power may turn off again or you may be unable to

record movies.

GB

29

On charging the battery

If you charge a battery that has not been used for a long time, you may be unable to

charge it to the proper capacity.

This is due to the battery characteristics, and is not a malfunction. Charge the battery

again.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted.

Unauthorized recording of such materials may be contrary to the provisions of the

copyright laws.

No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content

due to a malfunction of the camera or recording media, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth slightly moistened with water, then wipe

the surface with a dry cloth. To prevent damage to the finish or casing:

Do not expose the camera to chemical products such as thinner, benzine, alcohol,

disposable cloths, insect repellent, sunscreen or insecticide.

Maintaining the LCD monitor

Hand cream or moisturizer left on the screen may dissolve its coating. If you get

any on the screen, wipe it off immediately.

Wiping forcefully with tissue paper or other materials can damage the coating.

If fingerprints or debris are stuck to the screen of the LCD monitor, we

recommend that you gently remove any debris and then wipe the screen clean with

a soft cloth.

Note on wireless LAN

We assume no responsibility whatsoever for any damage caused by unauthorized

access to, or unauthorized use of, destinations loaded on the camera, resulting from

loss or theft.

Note on disposal/transfer of the camera

To protect personal data, perform the following when disposing of or transferring

the camera.

Format the internal memory (page 24), record images up to full capacity of the

internal memory with the lens covered, and then format the internal memory

again.

This will make it difficult to recover any of your original data.

Reset all camera settings by performing [Initialize] t [All settings] (page 24).

GB

30

Оглавление